Table of Contents
How do I fix my Whirlpool refrigerator that is not cooling?
A Whirlpool refrigerator not cooling may have a dirty or damaged gasket that leaks cold air, warming the refrigerator’s interior. Inspect the door gasket for damage, using a cloth dipped in warm water to clean away any dirt and debris. If the gasket is ripped or broken it will need to be professionally replaced.
How do I reset my Whirlpool refrigerator?
Reset the refrigerator Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes. Power unit up by turning on the circuit breaker(s) or plugging the product back in. Ensure the cooling function is turned on. Test the control panel functionality.
Why the fridge is not cold but the freezer is Whirlpool?
Whirlpool Condenser Coils are Dirty. Condenser coils cool refrigerant to maintain a cool temperature within the refrigerator. If the coils become covered with dust and debris, they may not be able to do so effectively. Consequently, your refrigerator won’t get cold but freezer will still maintain its temperature.
Why is my refrigerator running but not cooling?
The most common reason why a refrigerator is not cooling is a problem with the evaporator coils. Over time, evaporator coils can become covered with ice, which prevents the coils from working properly. If the coils are covered in ice, the ice will need to be defrosted to fix the problem.
Is there a reset button on a Whirlpool refrigerator?
Some Whirlpool refrigerators allow a soft reset. If your Whirlpool refrigerator is not functioning correctly, locate the door switches inside the refrigerator. Once you find them, press and release them. The fridge display will temporarily go blank and then kick back into normal operation.
What is the first thing to check when refrigerator stops working?
If Your Fridge Has Stopped and the Light is Off As obvious as this sounds, often a fridge shuts down completely because it’s simply getting no power. The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
Can you reset a refrigerator by unplugging it?
Unplug your refrigerator Disconnect your fridge from its power source by removing the power cord from the wall outlet. You may hear some whooshing or knocking noises after you do so; that’s normal. Make sure your fridge stays unplugged for several minutes, otherwise the reset won’t work.
How long does a Whirlpool refrigerator last?
Depending on model and size, a properly maintained refrigerator can last between 14 and 17 years. A standard refrigerator can run up to 17 years on average, while a compact refrigerator can run for 14 years.
Why is my refrigerator warm but freezer cold?
Common solutions for: Refrigerator freezer is cold but refrigerator is warm. If the evaporator fan is not working, the freezer or refrigerator will not cool adequately. To determine if the evaporator fan motor is defective, try turning the fan blade by hand. If the fan blade does not turn freely, replace the fan motor.
Why has my fridge gone warm?
Refrigerator Is Too Full If there are too many items in your fresh food compartment, that cold air may not circulate properly, resulting in a refrigerator that’s warm. It’s fairly common for a refrigerator to feel warm if it’s overstuffed, and this problem is obviously easy to resolve.
How much does it cost to fix a refrigerator that is not cooling?
Ultimately, people can end up paying anywhere between $40 to $1,000. Keep in mind that the pricier repairs are not commonly done since most people will decide they are not worth it. The average low cost for a refrigerator repair is about $200, while the average high cost is around $1,000.
How do I reset my refrigerator compressor?
How to Reset Your Refrigerator Compressor Step 1: Move the Refrigerator out from the Wall. Step 2: Unplug the Refrigerator. Step 3: Shut off the Control Panel. Step 4: Plug the Refrigerator Back In. Step 5: Reset the Temperature Settings. Step 6: Move Your Refrigerator Back into Place. Step 7: Wait at Least 24 Hours.
Where is compressor in fridge?
Where It’s Located: The compressor is located behind your fridge and at the bottom. It is a black, tank-like part. The compressor start relay is the part that feeds the cords into the compressor. You will need to pull your fridge away from the wall to access both parts.
How do you diagnose a refrigerator problem?
Check the temperature setting. Assure that there is enough room for air flow in the refrigerator or freezer. Check for air flow restrictions in vents. Test the temperature control. Clean the condensor coils. Check the door seals. Test the door switch. Test the defrost heater.
How long do I unplug my fridge to reset it?
Usually I would unplug it for about 5 minutes. This lets the refrigerant pressures in the system to equalize. It should also give the electronics time to reset.
What does resetting a refrigerator do?
Resetting the thermostat on the fridge allows you to further tweak the temperature settings, which can lead to reduced energy costs. It also gives the fridge a chance to defrost and return to ambient room temperature.
How much does a Whirlpool refrigerator compressor cost?
Repairing the compressor in an old fridge may cost more than half of the refrigerator’s purchase price. Conversely, it may cost you between $500 to $1,000 to repair or replace the compressor in a recent Whirlpool refrigerator model.
What does PF mean on Whirlpool refrigerator?
The PF Error code indicates that the unit has experienced a power failure during operation.
