Table of Contents
When multiple thermostats control one system, the house is divided into zones using dampers in the ductwork throughout the house. When one zone needs heating or cooling, the damper for the ductwork in that zone opens, guiding the warm or cool air to that zone.
Can two thermostats talk to each other?
Two thermostats communicate between the furnace/AC and themselves. In my first example, let’s say that Zone 1 hits 74 and turns on. Meanwhile Zone 2 is at 72. A ‘smart’ system might open the dampers in Zone 2 to cool it down to 71 while it’s also working to get Zone 1 down to 71.
Can you have two thermostats one house?
You can help make a more evenly conditioned home by installing a separate thermostat in another part of the house. When two thermostats are wired to a heating or cooling system with a zone control and dampers installed in the ductwork, you have true separate temperature zones in your home.
Why would a house have two thermostats?
You will need separate thermostats for upstairs and downstairs, and it is crucial these are set up correctly for optimal comfort. Upper stories are warmer than lower ones, so you want to adjust the temperature depending on the season to properly set up upstairs and downstairs thermostats.
Can a HVAC system have two thermostats?
It is possible to install a single central air-conditioning unit, with two or more thermostats, that can cool the house equally. The thermostat in each zone controls the temperature in the zone.
Do I need 2 thermostats?
If you have a traditional thermostat that doesn’t support the use of temperature sensors, you will need a thermostat in each room and potentially, multiple heating and cooling systems.
What’s a dual thermostat?
A dual thermostat is capable of having two distinct programs programmed in it. Most commonly a “present” program, which warms up during the day, cools in the evening etc. Both of these units can be toggled remotely over the telephone to close the 12V circuit toggling your Dual Thermostat to switch programs.
Can 2 thermostats control 1 zone?
Thermostats in zoned systems can control the same heating and cooling system or each thermostat can control its own system. When multiple thermostats control one system, the house is divided into zones using dampers in the ductwork throughout the house.
Can you run two heaters one thermostat?
You must wire heaters in parallel, not series when using them with one thermostat. All heaters must be wired in parallel. You can either do that by connecting each heater to the thermostat directly, or by connecting each heater to the next — just be sure that each heater is connected to the source wires.
How many thermostats should a house have?
You have to have at least one thermostat. You’ll likely have at least one thermostat per zone. This is the most precise and efficient way to save energy.
How do you set a 2 thermostat in the summer?
In the summer, you want to set the thermostat on the highest floor in your house to your desired temperature. You will then set the thermostats two degrees cooler as you make your way to the lowest floor in your residence.
What is dual set point?
“Dual setpoint” thermostats are designed to be used where the output of the thermostat (the thing you are controlling, whether it is a valve, damper, fan, etc.) is used to both heat and cool the space, depending on the season. A typical example might be a damper located in the ductwork serving a room.
How does a zoned thermostat work?
A thermostat is placed in each zone so that it can control the electronic dampers in your air ducts. When an area needs more air from your heater or air conditioner, the thermostat tells the damper to open up and let more air through.
What is the difference between a single and double pole thermostat?
A single pole thermostat operates off one circuit, and therefore cannot operate separately. Because of this the single pole thermostat cannot be turned off, but only turned down. A double pole circuit, however, has two directional currents providing a double pole thermostat the ability to turn off completely.
Why you should consider upgrading from a baseboard to a wall heater?
Baseboard heaters are a fantastic, economical way to add heat to a room in your home. Wall heaters cost a little more up front, but you enjoy the benefits of more efficient and quicker heating and more options for where to place your furniture.
How many heaters can you run on a 20 amp circuit?
A 20-amp breaker can support any combination of heaters up to a total of 3,840 watts. For example, using a single thermostat, the breaker could support two 1500-watt heaters or three 1000-watt heaters.
Can I wire two thermostats in parallel?
You may not be able to wire two thermostats exactly in parallel, but using multiple wall thermostats or temperature sensors to control one individual heating or cooling zone is easier than you might think.
Can I have a thermostat in each room?
If you’ve been wondering whether you need a thermostat in every room of your connected home, the quick answer is, “No!” The other comes priced so reasonably that you could feasibly install multiple thermostats to control different rooms separately.
