Table of Contents
Can you put drywall directly on basement ceiling joists?
Yes you can, but it is not always easy to do. The joists may not be perfectly spaced and you only have a 1-1/2 inch target for attaching two edges of the drywall. It also allows for a perfect layout 16 or 24 inches on centre. Feb 19, 2002.
What is the easiest way to finish a basement ceiling?
A super easy DIY option for your basement ceiling is glue-on tiles. Typically made of polystyrene or fiberboard, these tiles come in a variety of colors, sizes, and styles, and are also paintable. You’ll need to install a foundation, like plywood, to glue them to. But after that, it’s as simple as glue and stick.
What kind of drywall do you use for a basement ceiling?
While you can use the same drywall thickness for the walls and basement ceiling, most experts recommend a ⅝ inch thick sheet of drywall for ceilings. This is because ⅝ inch drywall is much less likely to sag between joists than standard ½ inch drywall.
How much does it cost to drywall a basement ceiling?
A ceiling costs about $1,700 to build and drywall in the basement. Contractors often include the price of a basic drywall ceiling in the room framing and drywalling costs when doing the whole room at once.
Should I nail or screw furring strips?
For furring strip installation, affix the strips across the joists every 24” on center with screws or nails at least 1” long so that they will go into the joist with a minimum depth of 1/4″. Use shims, if necessary, to achieve a uniform flat and level ceiling or wall.
Should drywall be glued to studs?
Why use drywall adhesive? Hanging drywall is a tough job. By applying glue for drywall to the studs or joists before installing the sheet, you cut down the need for screws in the field of the board. You’ll also have fewer nail pops and loose boards.
What is the cheapest way to finish a basement ceiling?
Thin wood paneling — typically 1/8- to 1/4-inch thick — can cover an exposed ceiling, and it’s available in a variety of designs. Fir plywood, hardboard, even oriented-strand-board (OSB) are even more affordable, but these less-expensive options typically require paint or sealant.
What is the cheapest way to cover a ceiling?
Here are some affordable ways to beautify your home’s ceilings: Paint. It’s a great way to change the perception of your space. Tin Tiles. Hide damage and uneven surfaces with tin ceiling tiles that introduce a vintage vibe. Moldings and More. Tiles or Planks.
Should you insulate basement ceiling?
Insulating the basement ceiling will keep most of the heat upstairs in the living space. As a result, the basement will be colder in the winter making it important to also insulate any water pipes or heating/cooling ducts in the basement.
Can you use 1/2 drywall basement ceiling?
Drywall Size – Basement Drywall Thickness The most commonly installed thickness, per my extensive Google searching, is 1/2 inch. This is what I had installed in my basement. TIP: If your ceiling joist are 24″ on center instead of 16″ then you need to use 3/8th’s for the ceiling instead of 1/2 inch.
Do I need mold resistant drywall in basement?
Modern mold-resistant drywall combines the moisture resistance of older green board with materials and engineering that also make it quite resistant to mold. But in rooms that experience frequent humidity and are often subject to mold and mildew, such as bathrooms or basements, mold-resistant drywall is a good choice.
Does a basement ceiling need to be 5/8 drywall?
3 Answers. 5/8″ drywall is rarely required in single-family residences. It was used historically because ceiling joists are often 24″ on center, and 5/8 resists sag. You can certainly use no-sag 1/2″ if you like.
Can I finish my basement myself?
The basic steps to finish your basement include insulating walls, choosing flooring and adding a ceiling to transform your lower level into an additional living area.
Is it cheaper to drywall or drop ceiling?
Drop ceilings are more expensive to install than drywall making drywall the cheaper option. However, if you can install a drop ceiling by yourself, you can save on labor costs. You should also factor in paint costs for a drywall ceiling and whether you are hiring a professional to install and paint for you.
How hard is it to drywall a basement?
Hanging drywall is not too difficult, and you don’t need a bunch of tools either. It can get very dusty, though, especially as you cut drywall sheets. The 4′ x 9′ drywall sheets we used are not extremely heavy, but they are kind of big and uncomfortable to move around. Dec 16, 2018.
How many furring strips do I need for a ceiling?
Install as many furring strips as necessary to cover the chalk line. For example, if your chalk line is 12 feet long, you will install one whole eight-foot furring strip, butting it against one wall, and then measure and cut four feet from another strip and attach it over the remaining space.
How thick should furring strips be?
Standard furring strips are marketed as 1-in thick, with the exception of the 2-in x 2-in strip. The actual thickness is usually just under a full inch. This makes them extremely versatile for a multitude of construction projects.
Can you glue furring strips to basement walls?
When you’re finishing a basement, it’s common to attach drywall to the bare basement wall structure using wood called furring strips. The process for attaching furring strips to concrete is rather simple, so long as you are using the proper kind of glue.
Should you glue ceiling drywall?
Glue is not needed, but will reduce screw pops by making the assembly more ‘solid’. I always use adhesive when I can (when there is no vapor barrier or insulation covering the wood).
Is Liquid Nails good for drywall?
LIQUID NAILS® Drywall Adhesive, (DWP-30), is a specially formulated construction adhesive for interior drywall installation and correcting minor framing irregularities in colder temperatures. Acts fast, bonds strong and buffers sound. Exceeds ASTM specification C-557.
Can you install drywall without screws?
No! The proper way to hang drywall is to glue and screw it! Building code requires screws.
