Table of Contents
How are pool lights turned on?
Much like any other light in your home, the most common way to control your pool light is with the use of a traditional ON/OFF switch. You can simply flip the switch up or down to turn on or off your pool light.
How do pool lights not shock you?
Bonding and grounding are the best defenses you have against pool electrocution. Grounding involves electrically attaching powered equipment to the ground. If there’s a short in the system, the circuit breaker trips to shut off power almost instantly, effectively rendering the equipment harmless.
How do LED pool lights work?
Light Emitting Diode (LED) lights are one of the most popular fittings for swimming pools. The fittings work by pumping voltage through the semi-conductor which emits light whereas incandescent and halogen lights rely on burning filaments. LED fittings simply work by plugging them directly into the power source.
How are pool lights wired?
Using wire nuts, the pool light wires are joined to the wires from the GFCI breaker, and the ground wire is attached to the green screw. Test the light for only 1 second – without water to cool the light, the lens and bulb can overheat and burst within minutes! After a quick test, the Junction box lid can be tightened.
Why don’t my pool lights work?
If the breaker that your pool light is on has been tripped, unplug whatever you just turned on or plugged in and then reset the breaker by turning it all the way off and then back on again. If that doesn’t work, you may have a bad breaker. If you have any GFCI outlets on your pool light circuit, try resetting them.
How long do pool lights Last?
Your pool lighting should give you few problems overall. Most incandescent bulbs will burn for 1,000 hours before bulb replacement is necessary. LED bulbs can burn for 25 years or more (or so they tell us).
What happens if water gets into pool light?
If there is water inside the lens of the pool light, which you can usually see from on-deck, that doesn’t mean that the light is leaking, but it does mean that the lamp gasket has failed, letting water leak inside and surround the bulb.
How common are pool electrocutions?
Over the past few years, instances of pool electrocution have seemed more and more prevalent. There have been approximately 60 deaths in the years between 1990-2003 that have been attributed to pool electrocution, a phenomenon that occurs all over the world that mostly affects small children.
Are 12V pool lights safer?
In truth, 12V Lighting can be the brightest, safest, most cost and time-effective option you can offer your customers.
Are LED pool lights worth it?
An LED light will save you roughly 75% on your energy usage compared to a comparable incandescent light. REMEMBER, that LED pool lights cost more, on average, than a simple incandescent light so your cost savings will not start till you recoup the additional money that you spent on the LED lights.
Are pool lights worth it?
Pool lights are worth it because they provide the necessary lighting for a pool especially during the night, which prevents accidents because you can see every area of your pool. Moreover, they are considered a necessity most especially if you want to get maximum usage out of your pool.
Why are pool LED lights so expensive?
It costs a lot of money to have sales people to go to all the different pool store chains that must be covered in the bulb price. You aren’t paying for a better bulb, you are paying for expensive overhead and multiple mouths to feed when each bulb is sold.
Does a pool light need a transformer?
If your current pool light is a 120V pool light, then you’ll need to have an electrician install a transformer between the power source and the junction box. The Junction Box, or J-box as it’s sometimes called, is the point where the wires from the pool light meet the wires from the breaker box.
Can a 12V pool light electrocute you?
Can a 12V Pool Light Electrocute You? The power that comes from a 12V light is low, but it can still electrocute you and cause injuries. On the other hand, 120V of light can cause serious damage and can even kill a person.
Are pool lights AC or DC?
Swimming pools and spa’s always need 12 Volts of AC power. Most people hear 12 Volts and immediately think of DC which is used in cars and also outside landscape lighting. If you hook pool LED’s to 12V DC, sometimes they work, but not correctly.
Does a pool light need a GFCI?
The pool light must be installed on a GFCI circuit. That means that the wires coming to the pool light J-box must come from a GFCI breaker. These are often easy to spot by the yellow Test button, and are usually 20 amp breakers. Both GFI breakers and outlets can, and will eventually fail.
How do I know if my pool light fixture is bad?
If the bulb tests well (3-20 ohms) the fixture is probably bad. Try a new bulb without closing the fixture. It probably will not light, and the fixture will have to be replaced. If the bulb tests poorly (overflow, open, no continuity, infinite ohms), the light most likely will work fine with a new bulb and gasket.
