Table of Contents
How does a Delta shower faucet work?
The Thermostatic Shower Valve cartridge is Delta’s newest innovation, designed to keep water temperature consistent (+/- 3 degrees F) by measuring and monitoring the temperature of the water and then automatically adjusted the water mix to maintain a more precise water temperature.
How do you use a Delta shower diverter?
Jetted Models Grasp the diverter stem handle on the wall between the two wall jets. Turn the handle left or right horizontally to operate the water jets only. Pull the center knob out to turn the water on. Rotate the lever counterclockwise for additional hot water or clockwise for additional cold water.
How do you adjust the water temperature on a Delta Monitor shower?
Slide the shower handle off the stem to expose the “Rotational Limit Stop” anti-scald valve. Grab the center of the “Rotational Limit Stop” and pull it toward you. Turn the Delta anti-scald valve to the left to increase the maximum temperature of the water, or turn it to the right to decrease the water temperature.
How do I turn my shower diverter on?
This diverter valve, also known as a tee diverter, is located on the end of the tub spout (see photo above). Activating it requires simply pulling up on the diverter, which then sends water to the showerhead. Pushing the diverter back to the downward position restores water flow to the tub again.
How do I identify my Delta Monitor shower faucet?
The model number is on all packaging, some faucets, and all installation instructions provided with your faucet. On the packaging, look near the UPC code or the top of the box. On the faucet, a model identification tag has been attached to most models manufactured since 2012.
How do you use a single handle shower faucet?
To operate a single-handled shower faucet, you either pull out the faucet handle to start the water flow, then turn the handle to adjust the temperature, or you turn the faucet to start the water flow.
Does it matter what order you turn off the faucets shower diverter?
“Do you turn off the water or the shower set first at the end of taking a shower?” Always the shower set first. If I don’t, the next time I turn on the water I’m apt to get hit in the side of the head with a blast of cold water. Sometimes my shower set sticks.
How do 3 way diverter showers work?
Here’s how they work: Three-valve shower diverter: Tubs with separate hot and cold handles may have a three-valve diverter located between them. Turn this third handle clockwise 180 degrees to send hot and cold water to the showerhead. Turn the diverter handle counter-clockwise to restore flow to the tub spout.
What does a 6 setting diverter do?
The 6 setting allow you to control each spray individually, or any combination of 2 spray groups at the same time. The body sprays will be plumbed on a pressure loop and function together as a unit. The tub spout does not connect to the diverter in any way.
How do you adjust the hot water on a Delta faucet?
To increase water temperature, either turn the hot water screw counterclockwise or turn the cold water screw clockwise. To decrease water temperature, either turn the hot water screw clockwise or turn the cold water screw counterclockwise.
How do you adjust faucet handles?
Unscrew the handle screw and remove the handle. Loosen the valve retaining nut but don’t remove it. Replace the handle without the screw and try pushing it in the direction you need it to go. There should be enough play between the faucet cartridge and the valve housing to allow for a small adjustment.
Why is my shower diverter not working?
The most common issue with a shower diverter is when water comes out of both the tub faucet and the showerhead. Check to be sure there is no residue clogging the shower diverter lever from fully lifting or lowering. If everything looks clear, the problem could be worn-out parts in the shower diverter valve.
How does a faucet diverter work?
The diverter inside your kitchen faucet redirects the water from the faucet spout to your faucet sprayer when you press the sprayer trigger. When you squeeze the trigger, the water pressure drops to engage the diverter. This stops the water flow at the spout and moves it to the sprayer.
Where is a diverter valve located?
It’s usually a lever that’s situated behind the bath taps that you can pull up or push down. System and conventional boilers don’t require a diverter valve. This is because the hot water they produce is stored in a hot water cylinder.
How do I know what shower valve I have?
The quickest solution of How to Identify the Shower Valve Manufacturer is to look for the manufacturer’s logo or name. A brand name or model can be found practically anywhere, so cleaning faucet handles, escutcheon, spout, decorative rings, etc., is helpful.
What is the Delta faucet logo?
Delta faucets have a distinctive D-shaped broach, so this can indicate a faucet from this brand. Moen and Mixet faucets have an oval-shaped broach, so this shape may indicate one of these brands.
How do I get my free Delta faucet parts?
Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service. Replacement parts may be obtained by calling 1 800 345 DELTA (3358) or by writing: Delta Faucet Company Product Service 55 E.
