Table of Contents
Here is how to restore Bissell CrossWave Max to factory settings: Click on the Hamburger menu button on the top left of the screen. Click on your Bissell CrossWave Max. Tap the gear in the top right corner of the screen. Choose the “Factory Reset” Button. Click on the red “Reset machine” button.
How do you reset a Bissell Cordless CrossWave?
Click on the red “Reset CrossWave” button. Hold down the mode button on your CrossWave for 10 seconds until you hear 2 beeps. You will initially hear just one beep after 5 seconds, continue to hold the mode button down until it beeps twice.
What does 2 red lights mean on Bissell CrossWave?
The two blinking red lights is a known issue, call Bissell and they will replace. The issue is a design flaw where the unit gets damaged if left on the charging station for a long period of time.
Why is my Bissell CrossWave Cordless not working?
Another reason you don’t have power could be because the handle isn’t inserted properly into the body of the CrossWave®. Push down on the handle. When properly inserted, it should “click’ into place. Remove the handle and re-insert into the body, push down until you hear a “click.”.
How do I update my Bissell CrossWave?
Click the hamburger menu on the upper left corner of your screen. Click on the CrossWave if update is indicated.
Why is my Bissell not connecting?
From the phone’s home screen, open the Settings app. Scroll down to the “BISSELL” row, and tap on it. Under “Allow BISSELL to Access”, enable the toggle for “Camera” Restart the app and try again.
How do you put a Bissell in pairing mode?
To put the robot in pairing mode, press and hold the Start/Pause Button for 5 seconds until you hear a single beep. 4. From the app, select “Have a BISSELL Connected Product? Connect it now.” Then choose your product from the menu.
Can you replace the battery in a Bissell CrossWave cordless Max?
A: Hi Patti – the battery can be replaced at a BISSELL Authorized Service Center if necessary and is covered under the manufacturer warranty. We don’t offer a replacement battery consumers can purchase and install themselves.
How do I know if my CrossWave is charging?
Make sure your CrossWave® is fully charged before first use. To check the status, remove it from the charging base and turn the machine ON. You’ll know the battery is fully charged when all three white status lights are illuminated.
What does the orange light on Bissell CrossWave mean?
Note: If orange dirty water tank indication light is illuminated, but the dirty water tank is not full, follow the steps below: Turn off machine and remove from docking station. Remove dirty water tank by pressing down on recessed button on top of tank.
What do the lights mean on Bissell CrossWave?
Your CrossWave® Cordless has an LED Light display that communicates different things about the battery to you. When it is dead, you’ll see one red blinking light. It will increase up to three lights as it charges. When it’s fully charged on the docking station, there will be 3 white lights.
Why does my Bissell CrossWave keep beeping?
If a Bissell CrossWave robot detects a problem, it will stop, produce a beeping sound, and the button light will flash or produce a solid light. Turn the robot OFF and remove hair and debris from the wheels.
Why does my Bissell CrossWave keeps shutting off?
If your machine turns off automatically again, unplug your machine and remove the nozzle. Hold the tab on the brush roll and spin the other end. Check the drive gear where the brush roll goes into the foot of the machine and remove any debris that may be wrapped in that area. Reinstall the brush roll and the nozzle.
Why is my Bissell vacuum not charging?
Cordless Bissell vacuum cleaners might have no power due to a dead battery, a faulty charging station, or a non-operative wall outlet.
How do you prime a Bissell CrossWave?
To start the machine, plug it in, then choose either the Hard Floor or Rug setting. Recline your machine and the brush roll will start spinning. Hold the trigger for ten seconds to prime your machine with water and cleaning solution. Your CrossWave is now ready to start cleaning.
Can you use the Bissell CrossWave without WIFI?
While it does nearly everything, it won’t vacuum the house unless you’re pushing it, so why do we need wi-fi? The BISSELL Connect app offers you helpful alerts, like maintenance tracking and notifications for charging the vacuum. It also offers some helpful usage tips so that you can get the most use from your vacuum.
Why does Bissell CrossWave connect to WIFI?
Connecting your Bissell CrossWave to a Wi-Fi network gives you access to the Bissell Connect app, where you can get helpful alerts, including maintenance tracking and notifications for charging the machine. It also offers helpful cleaning tips and videos to help you make the most of Bissell CrossWave.
How do you use the BISSELL app?
More videos on YouTube Download the app. Log in or create an account. Turn your robot on. Press and hold the power button for 5 seconds. Scan QR code under the dirt bin. Follow prompts in the app to connect to and name your robot.
What is a BISSELL SSID?
SSID stands for Service Set IDentifier and is your network’s name. If you open the list of Wi-Fi networks on your laptop or phone, you’ll see a list of SSIDs. Wireless router or access points broadcast SSIDs so nearby devices can find and display any available networks.
How do I reset my Bissell CrossWave cordless Max?
How to Factory Reset Bissell CrossWave Max Click on the Hamburger menu button on the top left of the screen. Click on your Bissell CrossWave Max. Tap the gear in the top right corner of the screen. Choose the “Factory Reset” Button. Click on the red “Reset machine” button.
How do you start a Bissell Smartclean?
Turn on the power switch of the unit on. The initial charge will take 4-5 hours. For the initial charge, plug the wall adaptor directly into the charging port on the robot vacuum and turn the power on. NOTE: The unit will not charge if the power switch is OFF.
Can you overcharge Bissell CrossWave?
WARNING Overcharging may cause battery damage, fire or explosion. TIP: Be sure to charge unit when there is less than 10% power left, one LED flashing red. Your BISSELL® CrossWave® Cordless has a Battery LED light display that will turn on when the unit is ON or charging to show the battery life status.
