Table of Contents
Using a tape measure tool, measure from the ground floor to the top of the deck flooring to calculate the overall height. The height of your space will give you a better idea of how many treads your spiral staircase will require.
How do you calculate spiral staircase dimensions and designs?
Steps to Design a Spiral Staircase Floor height ‘h’ = 2700mm. Riser ‘r’ = 225. No of risers =2700/225 = 12. No: of Steps = 11 + 1 landing platform.
What is the minimum diameter for a spiral staircase?
An International Building Code compliant spiral staircase must have at least a 5′ diameter. Our standard diameters range up to 6′ wide, but we are able to go much wider if your custom staircase calls for it.
How wide is a spiral staircase?
Spiral staircases generally range in size from 42″ to 76″ in diameter. The floor opening at the top of the staircase must be two-square-inches bigger than the staircase’s diameter. Spiral staircases are also measured by their floor to floor height, footprint, walking space, and landing length.
How are staircase dimensions and designs calculated?
Staircase Dimension Calculation Formula So Number of Riser = Height of Staircase / Height of one Rise. Number of Riser = 1500/150. Number of Riser = 10 Nos. So as per standard, we are providing 300 mm as tread length. Number of Tread = Length of Stair/One number of Tread. Number of Tread = 3000/300. Number of Tread = 10 Nos.
How big of an opening do you need for a staircase?
The generally accepted minimum width for a stairway is 36 inches. The width of the stair opening is 36 inches or the actual width of the stairway, whichever is greater.
Do spiral staircases meet building regulations?
All building regulation spiral staircases should comply with the 100mm sphere rule, i.e there must be no gaps greater than 99mm anywhere on the spiral staircase. However, your building control surveyor may still allow these types and designs of balustrade if you ask.
What are the dimensions of a staircase?
The stair’s width usually varies depending on the type of building the staircase is in, but for a normal residence, the standard tends to be 3 feet, 6 inches (106.7 cm). The minimum, in most places, is 2 feet 8 inches (81.3 cm). If a staircase exceeds 44 inches (111.8 cm), handrails are required for both sides.
How much floor space does a spiral staircase need?
If you are going through a hole in the floor your finished floor opening should be two inches greater than your stair’s diameter. For example, if you are using a 3’6” spiral stair to get you access to an attic through a hole in the floor then you would need a finished floor opening of 44 inches x 44 inches.
How do you measure a staircase?
For a straight staircase, measure the rise and run in inches (with an extra inch or two for the nose) of one stair and multiply that number by the total number of stairs. Divide this number by 12 to get the measurement in feet. Measure the width of one stair to the nearest foot.
How many stairs do you need to go up 8 feet?
Stair Rise for 8-Foot Ceilings An 8-foot ceiling will need 14 treads. Divide 96-inches (8-feet) by 7-inches to get 13.71 treads, and round up to 14. In this case, you would not round down as you would have one step that is too tall.
How many square feet is 13 stairs?
You’ll need between 80 and 110 square feet for 13 stairs.
How do you calculate space for stairs?
Sample calculation of a staircase that should be 2.60 meters high Calculate the number of steps that will be needed. Considering an ideal riser of 18 cm, the height of the space is divided by the height of each step. Calculate the height of each riser. Calculate the width of the tread.
How many stairs do you need to go up 10 feet?
As per thumb rule and various building code or IRC, assume standard design, for 12 feet height of staircase, you will need approximately 21 stairs and for 10 feet height you need 19 stairs to go up.
Do spiral stairs need a landing?
Landings, where required, are attached to the top of the staircase and provide the path to the upper level. Landing are required when a staircase is installed through a hole in the floor. Landings are not required if the staircase is attached to the corner of a balcony face application.
Do you need a landing on a spiral staircase?
Question 1 – How high can an Enzie Stair case go? An Enzie Spiral Stair is made to suit your floor to floor height. There is no limit to the height you can go. However, the building authorities may require a landing every 18 risers.
How much does it cost to put in a spiral staircase?
A spiral staircase ranges from $1,000 to $20,000. Installing one averages around $10,400. The total depends on the material type plus the height and width of the stairs. The installer’s labor rate impacts into the price, too.
How do you measure width of stairs?
Stair Width: Stair width is measured from edge to edge of each side of the tread, perpendicular to tread length. While measurements of length are conventionally longer than those of width when considering rectangles, in the case of steps, the width is usually the longer side. Stair width does not include handrails.
