Table of Contents
Those willing to undertake a brake shoe and drum replacement should expect the job to take about two hours to complete, and you could save upwards of $200 in labor costs by doing the work yourself.
Are brake drums hard to change?
While drum brakes do have a completely different layout and mode of operation than disc brakes do, they are usually no more difficult to service, and often require only a basic set of hand tools and a drum brake adjustment tool to get the job done.
How long does it take to replace rear brakes?
Usually, changing a set of brake pads takes approximately 30 minutes to an hour. If you have a professional complete the work, expect to pay for about an hour’s worth of labor. It’s worth pointing out that, as an amateur, it could take you upwards of 3 or 4 hours (maybe even longer) to replace your brake pads.
How much does it cost to replace two drum brakes?
The average brake drum replacement cost averages between $275 and $399 depending on the type of the vehicle you have the type of repair shop you’re taking your vehicle to.
How much does it cost to replace drum brakes?
If you aren’t comfortable replacing brake drums yourself, you can always head to a dealership or mechanic and pay to have it done. The average national cost is between $233 and $338 for the entire process. This includes $171 to $217 in labor, and $62 to $121 in parts.
Why are drum brakes so hard?
Drum brakes are a lot more difficult. There are return springs of different color (sizes) that have to go back in the same place, if the old brake shoes wore completely out(metal to metal) all the internal hard ware should be replaced. The brake shoes are of a different size on the front & rear on each wheel.
Are drum brakes better than disc?
Overall, when you consider disc vs. drum brakes, disc brakes deliver better performance in both wet and dry conditions. But drum brakes offer cost benefits, and for this reason, they continue to be widely used.
How many hours does a brake job take?
The bare minimum for a single axle brake job is going to be about an hour, and all that will be is new shoes or pads. a full job, with new parts kits and new drums and rotors, will run between three and four hours.
How much does a full brake job cost?
A complete brake repair — one that includes pads, rotor and caliper replacement — typically averages between $300 and $800. However, depending on the make and model of your vehicle, you can easily spend more than $1,000 on a complete brake job.
How many miles till replace brake pads?
As a general rule, you should get your brake pads replaced every 10,000 to 20,000 miles to keep wear to a minimum. When it comes to your rotors, you have a bit longer. Your rotors should be replaced between 50,000 and 70,000 miles to keep your brakes in peak health.
Can I change drum brakes to disc?
If you’re wondering if you should convert your drum brakes over to disc brakes, the answer is a resounding yes. A drum to disc conversion is one of the best “bang for the buck” upgrades you can make to your vehicle. Here’s more info about the benefits of drum to disc brake conversion.
Do drum brakes need rotors?
Most new vehicles come equipped with brake rotors, commonly known as disc brakes. Typically, both the front and rear are disc brakes, however, rear drum brakes can be found in some smaller cars or older vehicles.
Do rear drum brakes do anything?
A: Disc brakes stop the car better than drum brakes. However, for standard daily driving, having rear disc brakes does not give any significant advantage. Most of the stopping work is done by the front brakes anyway.
Do I need to replace my brake drums?
Replacing drums is always a better option, since machining makes the drums thinner and more susceptible to overheating. Drum brakes have many more parts than disc brakes and, as a result, take more time to replace. After the replacement, drum brakes need to be re-adjusted.
How much does it cost to do rear brakes?
The average rear brake pad replacement cost is between $115 and $300, this is about the same as the cost of front brake pad replacements.
How do I know if my brake drums are bad?
One of the first symptoms of bad or failing drum brakes is unusual brake pedal feel. If the brake drums are worn excessively they can cause vibrations that may be felt in the pedal. Worn drums may also cause shuddering or pulsating that will become noticeable once you step on the pedal.
How often should rear drum brakes be replaced?
The housing of drum brakes is designed to be operable typically for around 150,000 to 200,000 miles, while the shoes are meant to last for 40,000 miles. These values, however, are rated for regular driving conditions, and various factors could affect the longevity of the brake drums.
Do I need to press brakes to floor to stop?
One of the more common causes for the brake pedal going to the floor is a loss of brake fluid. When you’re out of brake fluid, your brakes simply won’t work. Another possible cause is a bad brake master cylinder. The master cylinder is where brake fluid gets compressed.
Why do I have to press all the way down on my brakes?
You Have Air in the Brake Lines Brake fluid is responsible for traveling through your brake lines and providing the force needed to make your brakes stop. As such, when air is in your brake lines, your brake pedal can be pushed all the way down to the ground due to the lack of force.
Is it worth it to convert rear drum brakes to disc brakes?
Disc brakes dissipate heat better than drum brakes, so they’re able to stop faster. The brake pads on disc brakes are designed to provide more friction than the shoes or pads in drum brakes. All of these factors make disc brakes much more powerful than drum brakes in terms of stopping power.
Why do trucks still use drum brakes?
Pick-up trucks still have drum brakes and there are good reasons for it. The main reason why pickups have drum brakes, is due to the fact they are cost effective, require replacement less often, and because they just take less maintenance than their disc brake alternative.
