Table of Contents
Display shows “E3” Manual Reset overheat protection has triggered. Inspect the heater and check that the air inlets and outlets are not blocked as this may cause overheating. Unplug the heater for 5 minutes and allow it to cool down.
What does E3 on electric heater mean?
E3 CODE. The heater not working. If the vents are dirty or clogged. Unplug the power, clean. the dust and debris of the vent area.
How do I reset my electric fireplace?
SOLUTION: Turn all switches to the “off” position and unplug the unit from the wall for five minutes. After five minutes, power everything back on.
Why is my electric fireplace reading error?
Check the fireplace for any faulty wiring. A tightly bent or over-stretched power cord may be causing the problem. Check your fuse box or breaker for any switches that have tripped. Inspect the fuse on the electric fireplace and replace if necessary.
What does ER mean on my electric fireplace?
It is possible that your outlet is faulty and either your Duraflame heater is overheating , or the outlet-which explains the blinking ER.(feel the plug& the outlet) if either is very warm-then that is the reason for the Duraflame blinking ER.
Why does my electric fireplace keep shutting off?
Overheating. An electric fireplace will automatically shut off when it starts to overheat. This is to prevent to the unit from overheating causing damage to the fireplace itself, or becoming a fire hazard for your home.
How do you fix e5 error on electric fireplace?
Make sure there is nothing leaning against it that shouldn’t be there, or something stuck inside that has stopped it from spinning. If nothing was blocking it, you want to do a full power cycle. Leave it unplugged for a couple of minutes. Then plug it back in and turn it on to see if the problem has corrected itself.
Why is my electric fireplace blinking E3?
Display shows “E3” Manual Reset overheat protection has triggered. Inspect the heater and check that the air inlets and outlets are not blocked as this may cause overheating. Unplug the heater for 5 minutes and allow it to cool down.
How long does an electric fireplace last?
Electric fireplaces can last for 10-20 years depending on how frequently they are used. Many manufacturers offer warranties ranging from 1 year to 10 years depending on the model.
How do you fix an electric fireplace light?
Electric Fireplace Light Bulb Replacement Begin by turning off your electric fireplace/insert. On the back of your electric insert you should find a Rear Access Panel. Locate and replace the light bulbs. Install your new bulb by screwing it in a clockwise motion. Secure the rear access door with the appropriate screws.
Can you replace the heater in an electric fireplace?
Can You Replace The Heating Element In An Electric Fireplace? In many cases the heating element can’t be changed within an electric fireplace. However, the heating element may be able to be changed in certain models of electric fireplace.
What does EI mean on a heater?
Error E1 is displayed on the control panel. The overheat sensor has been turned on. The sensor will reset if the unit is unplugged. The unit needs to be plugged back in.
Why is my duraflame heater not working?
To manually reset: Turn Power to Off and unplug the unit from the wall outlet for 5 minutes. After 5 minutes, plug the unit back into wall outlet, and operate as normal. If this doesnt work do the Master Reset, which is : turn off and unplug unit, Hold down main power button on the unit itself.
Why does my electric heater keep turning on and off?
The heater turning on and off excessively could be the result of the thermostat being placed in the wrong spot. If it’s installed near a heat-producing appliance, like a kitchen stove, it could confuse the unit into thinking the house is warmer than the actual temperature.
Is it OK to leave electric fireplace on all night?
Yes, it is okay to leave an electric fireplace insert on overnight but it’s best if you turn it off when possible. Although electric fireplaces do not produce any carbon monoxide fumes, its best to turn your electric fireplace off when you leave the room for an extended period of time or plan on catching some zzz’s.
Why does my heat surge shut off?
If your heating unit shuts off unexpectedly: Be sure the power cord is plugged into a working electrical outlet. Check for any obstructions. This feature protects the unit from any electrical surges that may occur.
What does E5 mean on heater?
An E5 error code indicates that there is an issue with your fan or venting. If your fan is coming on, but then giving you an E5, you most likely have a blockage in your venting. This mostly pertains to the 45HI as the 45H models vent directly out of the front of the heater.
How do you reset a Furrion electric fireplace?
Once you have checked the inlets and outlets and made any adjustments, you can unplug the fireplace for 15-20 minutes to reset the circuit board. Our tech at Furrion mentioned sometimes simply shutting off the fireplace does not allow it to cool down properly.
Where are duraflame heaters made?
Every single Duraflame product is made in America. They have two manufacturing plants, one in California and another in Somerset, Kentucky, that employ over 200 people.
How do you clean electric fireplace vents?
How to Clean an Electric Fireplace Turn off the unit. Remove or open glass doors. Dust your logs, stones, andirons or hearth with a clean cloth. Vacuum vents with a hand vacuum or hose attachment. Use a duster or damp clean cloth to wipe down the inside and outside of your fireplace walls.
How much is a fireplace insert?
How much does a fireplace insert cost? Most fireplace inserts and a professional installation cost about $2,000 to $4,000, depending on the state of your existing chimney and the model you select. Some electric models cost significantly less, but they offer less heat output than wood and gas fireplace inserts.
