Table of Contents
How do you calculate how much fence you need?
Divide the perimeter by the size of the fence panels you plan to buy. Typical panel sizes range from six to eight feet. The resulting number will tell you how many units you’ll need to fence the area.
How far apart should vinyl fence posts be?
Step 3: Plan the Post Locations For 6-foot fence panels, use 5-inch-by-5-inch posts placed 73 1/4 inches apart on center. For 8-foot panels, use 4-by-4 posts placed 96 inches apart on center.
How do you quote a vinyl fence?
On average, national homeowners pay about $17 to $38 per linear foot for different variations of a vinyl fence. To help you figure out the approximate price of your own project, multiply how many linear feet of fence you need by the national average price of $28 per linear foot.
How do you calculate linear feet for a fence?
When constructing a board-on-board fence, subtract the board overlap from the width and divide the result into the fence length. Multiply the number of slats by the height of the fence to find the number of linear feet of slat or picket material you need.
How many posts does it take to support a straight fence 200 yards long if a post is placed every 20 yards?
If the posts are placed every 20 meters, you need 10 posts for this run.
Do you put concrete inside vinyl fence post?
Manufacturers unanimously require vinyl fence posts to be installed into a concrete filled post hole. Setting vinyl posts into concrete provides a consistent footing to ensure the posts will remain inline and true for years to come. Concrete should fill the post hole up to 3-4 inches from the top.
Should vinyl fence posts be set in concrete?
Concrete is the foundation of the fence. Using concrete in the foundation point will allow consistency for all of the vinyl fence posts. The ground is always settling and moving. Having concrete as the foundation of your vinyl fence posts creates a firm base that won’t move and minimizes the posts moving.
Should a vinyl fence touch the ground?
Never install the vinyl fence too close to the ground The fence can topple under the pressure. Panels close to the ground may divert rainwater and cause flooding on the property. Always leave space below the vinyl fence panels.
How do you measure a gate opening?
Gate Opening Size: The ‘opening’ size is the distance between your hinge post and latch post, measuring from inside to inside of hinge and latch post. Gate Finish Size: The ‘finish’ size is the actual width of the gate, measuring from outside to outside of gate uprights.
Why is vinyl fence so expensive?
Vinyl fencing is expensive because of the technical manufacturing process that combines two complex layers of PVC through high-temperature melding and co-extrusion. Also incorporated are costly UV inhibitors, acrylic modifiers and impact resistant polymers.
What type of vinyl fence is best?
CertainTeed vinyl products are consistently rated at the top for their quality and performance. All PVC fence manufacturers are not the same. Our Bufftech® brand of premium vinyl fence offers performance features that far surpass competitive products.
Is vinyl fencing cheaper than wood?
The cost of installing a new fence is relatively affordable. Installing a vinyl fence costs less than wood, although wood as a material is generally cheaper. Wood ranges from $2 to $10 per picket, while vinyl costs between $2 and $6.
How many bags of concrete do I need for a vinyl fence post?
How Much Concrete per Vinyl Fence Post? Post Size Post Height (above surface) 80lb Bags Required 4×4 3-4ft double-triple rail9 inch hole 1 5×5 3-4ft double-triple rail12 inch hole 1 5×5 5-6ft semi & privacy12 2.
Should a vinyl fence wobble?
Vinyl fencing, although built to flex, should not be wobbling. This flexing may look like the fence is swaying. However, if the entire fence wobbles back-and-forth in the wind, there is an issue. A wobbling fence is likely the result of a smaller issue left unfixed for too long.
How much quikrete do I need for a fence post?
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
What is the life expectancy of a vinyl fence?
The life expectancy of a typical vinyl fence is 20-30 years, and it can range depending on the quality and brand of vinyl fence. To figure out how long a specific vinyl fence should last, it’s a good idea to check the manufacturer’s warranty. Most vinyl fence warranties range from 20 years to a lifetime.
How much wind can a vinyl fence withstand?
The ability of vinyl fencing to withstand wind depends on the design as well as the strength of the posts and the materials. Provided the fence is correctly installed and supported, it should hold up against winds of up to 100 mph.
How can I make my vinyl fence more sturdy?
To prevent this from happening, the vinyl post needs to be strengthened and reinforced. Strength can be added to a vinyl post by tightening up the post, rails, and pickets around the entire perimeter of the fence. Additionally, adding reinforcement inside specific posts will increase rigidity to high-risk areas.
