Table of Contents
According to the Home Depot, 4 to 6 inches of rock or gravel is needed for a driveway. Convert your estimated rock depth in inches to feet by dividing the number of inches by 12.
How many tons of rock do I need for my driveway?
To measure the driveway in cubic feet, multiply the length by width by depth. For cubic yards, divide the total cubic feet by 27. Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons.
How do I calculate how much stone I need for my driveway?
Measure the length and width of your driveway in feet. Multiply the length by the width to get surface area and divide the result by three because 4 inches is 1/3 of a foot. You now have the volume of gravel needed in cubic feet. Divide the volume in cubic feet by 27 because there are 27 cubic feet in a cubic yard.
How much does a ton of driveway rock cover?
A ton of gravel will cover approximately 100 square feet, 2 inches deep.
How much gravel I need for my driveway?
How Much Gravel Do I Need? Each of the three layers of a gravel driveway should be 4 to 6 inches thick. To calculate cubic feet, multiply this depth by the square footage of your driveway — which is length times width. To calculate cubic yards, divide the total cubic feet by 27.
How many square feet will 5 tons of gravel cover?
Regarding this, “how much area does 5 tons of gravel cover?, typically, as 1 ton of gravel cover around 108 sq ft area for 2 inch depth, so 5 tons of gravel = 108 × 5 = 540 sf coverage, therefore 5 tons of gravel can cover around 540 square feet or 60 square yards or 50 square meters area for standard 2 inch depth.
What is the cheapest gravel for a driveway?
Cheapest gravel for driveways. The cheapest gravel for driveways is crusher run, crushed shells, crushed concrete, slate chips, recycled asphalt, and pea gravel, which all cost $15 to $30 per yard, or less than $1 per square foot when purchased in bulk from a quarry.
How do I calculate how much rock I need?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.
What kind of rock is used for driveways?
Pea gravel is popular gravel for driveway aesthetics. It’s made up of round, small stones that can come in many different colors. This type of gravel will easily migrate and spread under the weight of vehicles, though, and needs to be stabilized for long-term, maintenance-free usage.
How do I figure out how much gravel I need?
Measure the length and width of the area in feet and multiply the figures together. Multiply your area figure by the depth of gravel that you wish to use, ensuring your measurement is also in feet. If your depth is in inches, divide it by 12 first. You now have a cubic feet volume figure.
How many square feet will 10 tons of gravel cover?
How much area does 10 tons of gravel cover:- typically, as 1 ton of gravel cover around 108 sq ft area for 2 inch depth, so 10 tons of gravel = 108 × 10 = 1080 sf coverage, therefore 10 tons of gravel can cover around 1080 square feet or 120 square yards or 100 square meters area for standard 2 inch depth.
How much area does a ton of 20mm gravel cover?
Based on our 20mm sized stones, 1 bulk bag of gravel will cover approximately 12 sqm at 50mm depth for paths and driveways.
What is Class C gravel?
‘C’ Base. A crushed 37mm (1&1/2 inch) minus aggregate consisting of gravel, sand and specific amounts of clay. ‘C’ Base would be used in similar applications to ‘A’ Base and placed prior to the ‘A’ Base if the grade needs to be raised significantly. ‘C’ Base also packs very well.
How thick should a gravel driveway be?
Driveway Layers A gravel drive should have a first layer of baseball-sized stones at least 4 inches deep. According to Tim Carter of AskTheBuilder.com, each layer thereafter should be 4 inches thick and in gradually smaller stone.
What area does a ton of gravel cover?
Type 3 Aggregate Calculator Un-compacted Cloburn aggregates weigh 1.4 tonnes per cubic metre. Therefore if you wish to apply them at a 50mm depth (the normal depth for a driveway) one tonne will cover 14 square metres.
How deep should you lay gravel?
Decorative aggregates should be laid at a depth of 50mm. This ensures proper coverage without revealing the surface below. Laying the gravel too deep will mean you sink into the surface and it becomes difficult to walk across.
What size gravel do I need for my driveway?
What is the Best Size of Gravel for a Driveway? Generally, the gravel for driveways should be between about 3/8 and 3/4 inches in diameter. They should be larger as compared to gravel that is used in pathways. Moreover, you need to consider the number of fines or the small granular material in the gravel.
How much gravel is in a dump truck?
How many yards of gravel in a dump truck:- a standard sized dump truck is always recommended for your project. It can carry about 15 to 16.5 cubic yards of 3/4″ or pea gravel per truckload. Thus, a dump truck can have capacity to hold 15 to 16.5 cubic yard of gravel per truckload.
