Table of Contents
Set the vent a minimum of 12 inches above the outside ground. Pro tip: Use no more than 25 feet. of 4-inch duct, and subtract 5 feet for every 90-degree turn and 2 1/2 feet for every 45-degree turn for dryer vent installation.
How high can a dryer vent be above the dryer?
The maximum height that a dryer vent can go up is the same as the total length of any dryer vent, 35-40 feet. The pipe that’s venting your dryer can go as high as 40 feet in the air, barring the fact that there aren’t any twists or turns.
What is code for dryer venting?
Dryer venting systems are covered in the International Residential Code (IRC) at M1502 – Clothes Dryer Exhaust.
How far should dryer vent be from wall?
6 Duct length. The maximum developed length of a clothes dryer exhaust duct shall not exceed 35 feet from the dryer location to the wall or roof termination. The maximum length of the duct shall be reduced 2.5 feet for each 45-degree (0.8 rad) bend, and 5 feet for each 90-degree (1.6 rad) bend.
How do I vent my dryer in the middle of the house?
The best way to vent a dryer without outside access is to run a vent hose through a window or to run a vent hose up through your attic space to a dryer vent on your roof. Alternatively, you can vent your dryer into your home and install a vent cover.
Can you use Schedule 40 for dryer vent?
Short Answer: You can, but you shouldn’t.
Is it OK to vent electric dryer into garage?
You shouldn’t vent your dryer into a garage because the exhaust from gas dryers contains carbon monoxide, which can be fatal if allowed to build up in your home. Other issues that could crop up include lint buildup, mold infestation, and structural damage.
Are flexible dryer vents legal?
White vinyl spiral ducts are still found in many homes, but are not UL approved for clothes dryer transition ducts. They’re very unsafe, burn more easily than foil ducts, and are prohibited by most building codes and appliance manufacturers. Using white vinyl transition ducts will void most dryer warranties.
Is it better to vent a dryer up or down?
It’s fine for the dryer vent to rise vertically to enter the building ceiling, but within the ceiling the vent should slope downwards towards its exit point at the building exterior wall.
How much space does a dryer vent need?
It’s ideal to have around six inches of space behind your washer and dryer.
Can a dryer vent touch wood?
Yes, that is considered safe. Direct wood contact is not a problem with the operating temperature of a dryer vent. You’ll have no fire if the vent is clear. lint does not escape from the pipe if all joints are foil taped.
Can dryer vent inside wall?
Dryer vents should not be installed in ways that make them difficult to clean and inspect. Any vent in a wall cavity should be made of solid metal, with all joints sealed with metallic tape. There should not be any tight turns and they also need to be sized properly to the distance run.
Can I use PVC pipe for dryer vent?
Currently, PVC, Vinyl, or aluminum foil material is still common in plumbing applications. However, manufacturers do not permit their use for venting a dryer. PVC or Vinyl duct trap can easily melt because of the hot air coming from the dryer.
Can you run a dryer vent in a 2X4 wall?
People are always asking what type of duct pipe can be used to vent a dryer in a 2×4 wall. The only issue is, code will disallow dryer ducting in 2X4 walls in the future. It will need to be 2X6 or 2X4 with a furring strip. Remember that if you need a 90 degree turn with no run-length penalty, use the Dryer-Ell.
Can you use flexible duct for dryer vent?
You can use a 4-inch flexible aluminum foil duct that is UL 2158A listed and marked for safe dryer venting. Look for a product that is constructed from heavy duty, fire resistant aluminum foil with a high density, corrosion resistant wire helix. Remember that only ducts 8 feet or less can be UL listed and marked.
Can you vent a dryer through the roof?
It is not advisable to vent a dryer through the roof. This is one of the most common mistakes we see from people who are not experienced with air ducts. Dryer vent specialists will tell you that a vertical approach to installing a dryer vent is inefficient and creates a fire risk for a home if it goes unchecked.
What type of dryer vent is best?
So, what type of dryer vent is the best? Most professionals and home experts agree that aluminum dryer vents perform most effectively for the majority of homes. Other common types of dryer vents include flexible steel and metal.
Why does a dryer have to be vented outside?
Exhaust from gas dryers must be vented outside because it contains carbon monoxide. When the times comes to clean your external dryer vent, you’ll need to go outside to access it. Neither indoor nor outdoor dryer vents should be connected to plastic dryer ducting, to avoid a potential fire hazard.
Does an electric dryer need to be vented outside?
Every electric dryer has to have an outlet through which it expels warm, moist air, or it won’t work. The air is usually loaded with lint, and if you don’t vent it outside, it can cause all kinds of problems. The moisture can rot framing and promote mold growth, and the lint can catch fire.
Can I vent my dryer into the attic?
The International Residential Code allows you to run a dryer vent through the attic, but you can’t terminate it there. Doing so would fill your attic with warm, moist air that could rot the framing and ruin the attic insulation, and lint from the dryer could create other problems.
Can you use flexible foil duct for dryer?
Dryer venting tips and practices Flexible transition hose between the dryer and the wall outlet should be either the foil type or the aluminum flexible duct (most preferred). Do not use the plastic or vinyl. Concealed ducting must be rigid metal (galvanized or aluminum) duct.
