Table of Contents
What blade do you use to cut trim?
Finally, most experts opt to upgrade their miter saw blade. Despite miter saws being the best option for cutting baseboards, the blades they come with are often not designed for trim work. Instead, many professionals upgrade to 60-tooth blades.
How many teeth miter saw blade for trim?
Normal miter saw blades will have a tooth count of 60-80. Lower tooth count blades of 50-60 are best for rough cuts to lumber. A precision blade for trim work will typically have a tooth count of 80-100. Therefore, miter saw blades should have between 60-80 teeth.
What size Mitre saw for trim work?
If you only expect to use your miter saw for cutting trim or siding, and don’t plan on cutting anything more than an inch thick or 6 inches wide, a 10-inch miter saw should be sufficient. But if you need to cut larger boards, or just want more versatility, a 12-inch miter saw is the better choice.
Can you put a 10 blade on 12 miter saw?
Yes, as the max size on on a Miter Saw that was sold with a 12 in blade should accommodate a 10 in blade !.
What is a 60 tooth saw blade used for?
It’s better suited for cutting melamine, chipboard, and plywood. Usually 60 to 80 teeth (on a 10″ blade) with shallower gullets between teeth and a more gentle forward rake around 10°.
What is a 40 tooth saw blade used for?
Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts.
What is the best blade for cutting hardwood?
The best saw blade for ripping hardwood is a rip blade. This blade is specially made for cutting through wood fibers, so it will cut through hardwood easily and leave a clean edge. Rip blades usually have 10 to 40 flat-topped (FT) teeth, which is a comparatively small number, but it will move through the grain quickly.
Is it better to have more teeth on a Mitre saw blade?
Miter: Miter saws can perform quick, accurate cuts in wood at a variety of angles. As these saws are typically used for crosscutting, choose a blade with a higher tooth count.
What is the best way to cut baseboards?
Use a miter saw to bevel cut the end at a 45-degree angle. The cut will reveal the profile of your baseboard. With a coping saw, cut along the profile. Slightly angle the blade so that you cut away from the backside of the baseboard.
What saw is best for cutting trim?
Typically, a table saw will provide you with the most functionality for this task. However, you may also need to use a jigsaw if you will be required to cut tight areas. Of course, if space and budget allow, investing in both a table saw and a jigsaw will allow you to work more quickly to finish the trim project.
Is a 10-inch miter saw big enough?
10-inch Miter Saw The 10-inch blade cuts pieces that are up to 6 inches wide, which covers most trim and molding boards. Trim is seldom more than 4 inches, so you’ve got plenty of wiggle room with a 10-inch miter saw. A 10-inch blade will spin faster than a 12-inch blade, resulting in smoother cuts.
Can a 12 miter saw cut a 6X6?
The 12-inch miter saw will be able to cut through a 6X6 piece of lumber however not on a single go. These are great saws for 2X6 cuts.
Can you use a 7.25 blade on a 10 miter saw?
Yes you can. The only real difference, besides maximum cutting depth, is that smaller blades are often thinner and have a narrower kerf.
Can a 10 miter saw cut a 4×4?
If you really want to cut 4x4s reliably, and if you foresee many future projects involving 4x4s, then you’re asking the wrong question. It shouldn’t be a matter of whether a 10-inch miter saw can cut a 4×4, but rather what miter saw is better suited for cutting 4x4s? The short answer is, you need a 12 inch miter saw.
Can I use a 12 blade on a 14 miter saw?
Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″).
What is a finishing blade used for?
Finishing blades are designed for making clean and precise cuts on parts of the wood that will be visible when the job is completed. To achieve this, they have a larger number of teeth and are intended for making extra-smooth cuts that don’t damage the wood.
What is the purpose of the gullet on a saw blade?
Gullet. The space between the teeth and the body of the saw. This space holds the sawdust while the teeth are in the cut. The gullet must be large enough to hold all the sawdust produced.
