Table of Contents
Measure the actual mower deck size using a tape measurer and extend the tape from the widest point on one side of the deck to the opposite side of the deck. The average riding lawn mower, also referred to as a garden tractor, is between 48 inches and 63 inches wide with the discharge chute in the upright position.
How are lawn mower decks measured?
If there is no obstruction, feed your tape measure through the pulleys, across the center of the deck, and hook it on the opposite side. For a round deck, locate the widest area of the circle, or the diameter, and extend your tape measure across that area. Note the distance on your tape measure. This is your deck size.
What size deck is my mower?
A small, 1/2-acre lawn is suited to a deck size of 40 inches or fewer. If your lawn is 1/2 to 2 acres, then a riding mower with a deck that is 42 to 48 inches wide would be appropriate. If the lawn is 3 acres or larger, the deck should be at least 50 inches wide.
How do you measure a lawn mower?
LENGTH: Length is measured diagonally from one tip of the blade to the opposite tip of the blade. It is important to measure the length correctly. Measuring from end to end will result in the wrong blade length. All length measurements must be made diagonally.
What is lawn mower deck size?
Deck widths range from 42 inches to 54 inches. To know what size you need, divide the mower deck size by 12 to get an approximation of the acreage the mower can handle. So residential-duty a mower with a 54-inch deck can mow up to 4.5 acres.
Can I put a bigger deck on my mower?
Can I put a bigger deck on my mower? Yes, you can fit a bigger deck to your mower, but engine power and deck size are often proportional.
What does the inches mean on a lawn mower?
The smaller your yard, the smaller the mower deck can be – the actual width the mower will cut in a single pass. A 20-inch walk-behind mower may be perfect for a small yard, but you will probably want a 21-22 inch mower for a larger yard to cut down on mowing time.
What size blades do I need for a 42 inch deck?
AYP Blade fits 42″ Cut Decks. AYP Blade fits 42″ Cut Decks, needs two blades. Size: Length: 21″, Center Hole: 5/8″Star, Width-thickness: 225-149. Replaces # 127843, 138498, 131323, 138791 & 532127843. {Blades are sold individually} If you purchase 8 of these blades you get FREE SHIPPING.
How do you measure for a riding lawn mower cover?
How to Measure a Riding Mower Deck Run the measuring tape over the top of the mower deck, from right to left or left to right, as close to the middle as possible. Secure the end of the measuring tape on the other end of the mower deck and note the size.
Does a 1/2 acre need a riding mower?
For lawns over 1/2 acre, we recommend upgrading to a riding mower. If cutting time is important and you have a lot to cut, you need a fast riding mower with a 40-60 inch+ cutting deck.
What do the numbers mean on a mower deck?
Some lawnmowers will have settings with letters or numbers on the wheels. It might say “1 2, 3, 4” or “a, b and c”. Those numbers don’t necessarily correspond to 1 inch, 2 inch, or 3 inches. So, to measure the height of the cut, you can’t simply measure the distance from the lawnmower deck to the ground.
How do I know what size lawn mower blade I need?
Measuring a Lawn Mower Blade Length should be measured from cutting tip to cutting tip, diagonally across the blade. Type of Center Hold: Circle, 5 / 6 / 7 point star, hourglass or “Double D” Center diameter should be measured directly across the center hole. Diameter of outer holes.
How wide is a 72 inch mower deck?
With a 24.8 horsepower Kubota diesel engine, a wider 72 inch ACS Kubota PRO deck and a variety of all-new operator features, the powerfully-engineered ZD1211-72 was made with your time and comfort in mind.Specifications. Measurements Mowing Width 72 in. (1,829 mm) Mowing Height Range 1 – 5 in. Fuel Tank Capacity 12.9 gal. (48.8 l).
What size mower deck do I need for 1 acre?
The wider the strip of grass a cutting deck mows in one pass, the less time you’ll spend mowing. It is estimated that a 42-inch deck mounted on a standard garden tractor can mow 1 acre of lawn in about one hour.
What is cutting deck of a lawnmower?
Chassis (Lawn Mower Chassis, may also be referred to as the ‘cutting deck’): This is the main ‘body’ of a lawn mower where the blades are housed. Most lawn mowers will have a metal deck (steel or aluminium), but some are now made of robust plastic.
Are riding mower decks interchangeable?
Are mower decks interchangeable? – Quora. Quite a lot of mowers are built the same way, by the same company, but sold with different brand names on them, and in this case, if it’s the same basic MODEL of mower, you can usually interchange the decks, no problem or only very minor problems.
Do all lawn mower engines have the same bolt pattern?
Engines: What to Look For If you do not know the horsepower exactly, that’s OK since most engines within a power range have a similar pattern for the bolts that mount the engine. For example, most 3 to 5 HP engines have the same bolt pattern. Another consideration is the size of the engine compartment.
Are Craftsman and Husqvarna decks interchangeable?
sergeant. AYP(Husqvarna) is the manufacturer of both Craftsman tractors and Husqvarna Tractors the attachmnet are interchangeable. For an acre I would purchase a tractor at least with a 46inch mowing deck if not a 48inch mowing deck.
