Table of Contents
Quarter round is another moulding style typically paired with baseboards to cover up gaps and imperfections between the base and the floor. However, this style of moulding is always shaped like a quarter of a circle, hence the name. It has a perfectly curved edge and comes in a variety of sizes.
What is difference between quarter round and shoe molding?
Shoe molding is much the same as quarter round, having the same 90° angle on the backside but instead of being a perfect quarter radius, its profile is a bit more squat. Using shoe molding gives the floor installer more latitude in their end cuts and also allows the trim carpenter to hide un-level floors.
What is a 1/4 round trim?
Finishing trim comes in two different shapes: shoe molding vs. quarter round. As the name implies, this type of molding is one-quarter of a round dowel (split a dowel down the middle, then further split the halves, and you’ll have quarter-round).
Is quarter round molding necessary?
One of the most common questions people ask is if they really need the base shoe, or if it’s just an add on. The answer is a simple yes. Without it, there is typically a gap between the trim and flooring, which is not only unattractive but makes it extremely easy for dirt and debris to build up under the base trim.
Can I use quarter round instead of baseboard?
Sure, you can use quarter round without a baseboard as long as the crack you’re covering stays behind the quarter round. It is a plain, simple, clean look.
Should you paint or stain quarter round?
If you are laying quarter round or shoe molding on hardwood floors, you should lay a quarter round or shoe molding that matches the floor wood grain & stain. If you are laying quarter round on a ceramic, vinyl, or stone tile floor, you should paint the quarter round to match the baseboard molding.
What can I use in place of quarter round?
What can you use instead of quarter round? If you don’t want to reinstall quarter round, the other option is to install shoe molding. Quarter round and shoe molding will cover any gaps between your flooring and your wall/trim. Despite having the same job, quarter round and shoe molding are not the same thing.
Is quarter round dated?
Quarter round molding is often the default standard molding among contractors, but it looks cheap and dated. Be sure to specify an alternative, such as a flat molding. Most contractors will be more than happy to accommodate. Quarter round molding is, literally, a quarter of a dowel.
Should I nail or glue quarter round?
A: Quarter-round should be nailed to the base boards only. It is intended to hide gaps between the base and floor. It should also permit a little movement in the flooring. Plus, it absorbs the impact of feet and furniture legs, so you may want to replace it sometime—thus, don’t glue it.
How expensive is quarter round?
$4.90 Per Foot Installed The cost to have quarter round trim professionally installed is about $4.90 per linear foot, or around $390 for a 20 x 20 room. The most commonly used trim costs $0.70- $2.65 per linear foot, but DIY price for the project might be higher than that if you need to purchase tools and fasteners.
What type of baseboards are in style?
Solid wood finger jointed wood, and MDF (medium-density fiberboard) baseboards are among the most popular material choices. Choosing the material often comes down to budget or color preference, so it’s easier to determine which material is right for your house.
How do you attach quarter round to baseboard?
Use the nailer or hammer and nails to attach the molding to the baseboard. Be sure you hold the quarter round tight against both the baseboard and floor for a tight fit. To hand-nail molding, drive each nail almost flush with the quarter round, then use the nail set to sink the head beneath the surface.
Should baseboards touch the floor?
Baseboards should only touch the floor if you have no plans to carpet your floors and if you’ve already finished installing your other flooring. If you have yet to install the rest of your floor, carpet or otherwise, you’ll need to take into account the height of the installed flooring.
How do you put down quarter round without a nail gun?
How to install quarter round without a nail gun but with a hammer Step 1: Sweep dirt and debris. Step 2: Lay the quarter round flush against the baseboard. Step 3: Nail it! Step 4: Continue nailing. Step 5: Install more counter-rounds.
Should baseboard match hardwood floor or doors and trim?
Match the Baseboard and Trim Your wood floors are going to be the backdrop for your home. But you can also Paint all the trim in a contrasting color to make the hardwood floors pop. This Virginia home uses two different colors on the trim to blend into the walls.
Should baseboards match wall or floor?
If you paint the baseboard to match the walls, then the baseboard will blend into the walls. This can have the effect of making walls seem larger, a positive quality for a small room. It also makes the architectural features blend together more, which is a good idea if you want to draw attention away from something.
