Table of Contents
1-5 of 5 Answers It’s the little arrow on the front. You set the time inside and close door and hit the arrow. Close door. GOFROGS, the start button on this Whirlpool® Microwave is the button that looks like a triangle. When door is closed there are 3 buttons. The start button is the ‘>’ button on the front of the unit.
What is the start button on a Whirlpool microwave?
The start button is identified as the arrow or play icon located on the display. Please see the picture below. Refer to the Owner’s Manual for control operation instructions.
How do I use the power on my Whirlpool microwave?
Changing the Power Level on your Whirlpool Over the Range Microwave Press the OPEN button. Place food on the turntable. Press the POWER button. Enter the level of percent of cook power. Press POWER button. Enter the cook time. Close the door and press the START button.
What to do when Start button is not working on microwave?
Press and hold the START/ENTER key again for approximately 4 seconds. The L indicator or lock icon should disappear from the display. If the controls are still not responding, attempt a reset on the microwave by unplugging the unit for 2-3 minutes. Plug the microwave back in and attempt the use the microwave again.
How do you reset a Whirlpool microwave?
Perform a hard reset. Pull the plug out of the wall power supply, and wait a moment. Plug the GE microwave back into the wall power supply to reset any anomalies with the microwave’s memory.
How do you turn on a Whirlpool Gold Series oven?
To preheat a Whirlpool oven, begin by pressing the Bake function. The oven will automatically display a temperature of 350 degrees Fahrenheit (175 degrees Celsius). If you need to bake at a higher or lower temperature, use the arrows to adjust. Then press Start.
Where is the start button on Whirlpool low profile microwave?
Hello Kartal, the start button is located above +30 seconds button. Hopefully this information is beneficial to you.
Where is the start button on Whirlpool convection microwave?
“Where is the start button?????” It’s the little arrow on the front. Close door. GOFROGS, the start button on this Whirlpool® Microwave is the button that looks like a triangle. When door is closed there are 3 buttons. The start button is the ‘>’ button on the front of the unit.
Is there a reset button on my microwave?
A soft reset is simply turning off the microwave oven to cancel or erase the program you’ve input in the microwave. To do this, you will just simply press on the Off/Clear button. Pressing Off/Clear button and holding it for about 3 seconds will also resolve the Control Locked feature of the microwave.
What causes a microwave to suddenly stop working?
The most common cause for a microwave oven not working at all is a blown main fuse. The microwave main fuse will cut the flow of electricity if too much current passes through it. There can also be thermal fuses, cavity fuses, and thermoprotectors which will interrupt the electrical flow if the microwave overheats.
How do I reset my Whirlpool electric oven?
Reset power to the product: Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Start a bake cycle. Monitor the oven for one (1) minute to ensure the error code does not display again. Verify oven operation.
Why is my Whirlpool oven not working?
If an oven won’t turn on there could be an incoming power problem. One of the wires that supply power to the oven element or igniter might be burnt out. These wires commonly burn out near the heat source. To determine if a wire has burned out, inspect the wires leading to the element or igniter.
How do I get my Whirlpool microwave out of demo mode?
To Exit Demo Mode: Select Try the Product. Scroll and select Explore. Select the Tools keypad. Scroll and select INFO. Select Store Demo Mode and select OFF. Select YES on the confirmation screen.
How do I start my Whirlpool self cleaning oven?
How to use a self-cleaning oven Step 1: Prepare the oven for self-cleaning. First, remove everything (including racks) from your oven. Step 2: Select a self-clean option. Step 3: Start the self-clean cycle. Step 4: Wipe the oven down.
How do you preheat a Whirlpool Magicook microwave?
First press the Forced Air button. 175°C is displayed. Step 3. Press the temperature up button to increase the temperature to 200°C.
How do I start my oven for baking?
A typical start sequence for baking begins by pressing the “Bake” button. Use either the up and down arrows or the number keypad to enter the desired oven temperature. Then press the “Start” button.
What button do you press to preheat an oven?
Simply grip the dial, press down on it, and turn it until the mark lands on the right temperature. Wait until the oven reaches the desired temperature. Most modern ovens have a setting that lets you either see the current temperature or beeps when ready.
What are the symbols on an electric oven?
Oven Symbols Guide Fan oven symbol. The standard setting for many electric fan-assisted ovens shows a fan, often inside a circle. CircoTherm® symbol. Circo-roasting/grill with fan symbol. Bottom heat symbol. Top and bottom heat symbol. Pizza symbol (fan with bottom heat) Bread baking symbol. Slow cooking symbol.
