Table of Contents
How much does it cost to keep the pilot light on the fireplace per month? We have calculated that a standard pilot light uses 416.88 cubic feet of natural gas or 4.723 gallons of propane per month.
Is it OK to leave the pilot light on in a gas fireplace?
Generally speaking, it is safe to leave your continuous pilot light on at all times, assuming it stays lit (more on this in a moment). While it does cost more to keep your pilot light on in between uses, it can actually have some benefits to your system.
How much gas does a pilot light on a gas fireplace use?
The average gas fireplace pilot uses about 21 ft3 (0.6 m3) of gas per day. In the past, manufacturers have claimed that people turn off pilot lights between uses. If this were the case, many gas fireplaces would be quite efficient.
Do propane fireplaces use a lot of propane?
Home » Blog » How Much Propane Does a Fireplace Use? As a general rule, a propane fireplace uses about one gallon of propane for each 100,000 BTU. So if you install a propane fireplace that is rated 50,000 BTU, you’ll be using about one gallon of propane for every two hours that it’s in use.
Do pilot lights waste gas?
A pilot light is a small gas flame, usually natural gas or liquefied petroleum gas, which serves as an ignition source for a more powerful gas burner. Originally a pilot light was kept permanently alight, but this wastes gas.
Should I turn off fireplace pilot light in summer?
Your Utility Bill Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.
How much gas does a pilot light use per hour?
Most pilot lights consume around 600 BTUs of gas every hour. If you leave your pilot light on for an entire day, it would roughly consume 14,400 BTU’s every day.
How much propane does a pilot light use per day?
Well, if you keep a pilot light on 24/7, it will spend: 0.00656 gallons of propane per hour. 0.157 gallons of propane per day. 4.723 gallons of propane per month.
How big should the pilot light be on a gas fireplace?
A pilot flame should be blue with a yellow tip and strong enough to cover 1/2 inch at the end of the thermocouple tip. If the flame is too strong and adjusted wrong, it will be noisy and cause improper furnace operation.
How much does it cost to leave the pilot light on a gas fireplace?
The average fuel consumption of your standing Pilot light is: Natural gas is $0.60 a day = $219 a year. Liquid Propane is $1.80 a day = $657 a year. Sophisticated fireplace manufactures like Travis Industries have developed Intermittent pilot light systems.
How long will a 100 lb propane tank last for fireplace?
At a consumption rate of 26,000 BTU per hour, your 100-pound bottle will fuel your propane fireplace for about 84 hours, equivalent to 3.5 days of continuous 24/7 operation.
How much propane does a fireplace use per day?
The simple answer is, a propane fireplace uses about one gallon of propane per 100,000 BTU. So, if you have a propane fireplace that is rated 50,000 BTU, you can expect to use one gallon of propane every two hours.
How long will a 120 gallon propane tank last?
Therefore, if you have a 120-gallon propane tank and it is filled to 80% capacity, you would have approximately 96 gallons of fuel in the tank. Multiply 96 gallons by 1.09 gallons per hour, and you would have 104.64 hours of heat and energy still to go on your current propane fuel supply.
Does a pilot light give off heat?
Here is some basic information about leaving the pilot on or off… Pilot OFF: No gas is being wasted so you are conserving energy and saving money! No heat is being generated by the pilot so the glass door on your fireplace will not be warm to the touch.
Do gas fireplaces burn a lot of gas?
Depending on the age of a gas fireplace and its maximum heat output, a gas fireplace can use a relatively large amounts of gas if used at max settings for a number of hours per day. However, gas fireplaces be a very cost-effective form of heating, especially if using natural gas rather than propane.
Can you use a gas fireplace without electricity?
Yes! All Regency gas fireplaces, inserts, and stoves can operate safely during a power outage. The fireplace will continue to produce radiant heat and warm up the home. If your unit has a blower, it will no longer work; however, a fireplace blower is not necessary for the operation or safety of the fireplace.
Is there always a small flame in a gas fireplace?
Do Gas Fireplaces Always Have A Flame? Gas fireplaces that use a standing pilot ignition system will have a pilot flame that’s always on. Gas fireplaces that use an intermittent pilot ignition system won’t have and/or require a flame that’s always on as the pilot can be switched on and off as required.
How many BTU is a gallon of propane?
Of course, a cubic foot is a larger quantity than a gallon. To get a better comparison, you need to convert the BTU figure for propane into BTU/gallon. That gives: 91,600 BTU/gallon for propane.
How long will a 100 lb propane tank last at 30 000 BTU?
So take the BTU’s in the tank and divide it by the BTU’s per hour of your unit and you’ll get the hours of operation until your tank is empty. For example if your unit is 30,000 BTU’s then your tank would last about 72 hours of burn time.
How many gallons does a 100lb propane tank hold?
A 100 lb. tank holds 23.6 gallons and weighs 170 lbs. when full. As mentioned, there are additional factors that can affect the overall amount of usable propane within the tank.
