Table of Contents
Step 1 Headlights. Unplug the stock harness and remove the headlights. Remove battery negative terminal. Take out the HID bulb from the plastic shell and remove the circular plastic piece. Screw in the HID bulb back into the headlight housing. Before you mount the ballast, test the HID light to make sure it lights up.
Are HID lights hard to install?
Many newer cars nowadays come with HID headlights as standard or as an added option. If you thought adding on HID headlights was extremely complicated, it’s actually pretty straightforward if you follow the directions.
Which are brighter HID or LED?
Brightness: LED lights can have a brightness of 9,000-10,000 lumens while HID might have 8,000 lumens. Both, however, are brighter than traditional halogen lights. Technology: LED lights use electricity while HID uses gas (typically xenon).
Does HID need ballast?
A ballast is essential in HID lighting technology because it provides the voltage to start the bulb and it also helps in maintaining an adequate flow of electrical current to the bulb. Simply speaking, a ballast is essential if you want to enjoy the real strengths of HID bulbs.
What causes a HID ballast to fail?
In most cases, ballast failure occurs as a result of the surrounding environment. Heat and moisture are great enemies to your HID ballast. When it is too cold or too hot, the ballast can burn out or fail to start headlights. A combination of heat and constant condensation can also cause severe corrosion over time.
Do you need a relay harness for HID kit?
If your HID kit does not come with a ballast, it’s highly recommended that you also install a relay harness. Going without either piece of equipment could do serious damage to your vehicle. We offer a variety of HID conversion kits that come with CANbus ballasts, so you don’t have to purchase a relay harness.
Why are HID headlights illegal?
Cheap HID conversions are illegal in some (or all) states because the light pattern is improper, or the colors don’t meet standard.
Are HID kits legal?
In the Department for Transport’s view it is not legal to sell or use after-market HID lighting kits, for converting conventional Halogen headlamps to HID Xenon. If you want to convert your vehicle to Xenon HID you must purchase completely new Xenon HID headlamps.
Are HID lights worth it?
HIDs last longer, burning at least 2,000 hours and up 8,000. If you spend a lot of time on the road after dark, HIDs are a much better option for your vehicle as they will last for a very long time and will be worth the cost for the upgrade.
Can you convert halogen to HID?
HID and halogen lights are not interchangeable, as the lights require separate bulbs.
What is an HID conversion kit?
What are HID car headlight conversion kits? HID conversion kits are promoted as an aftermarket upgrade for halogen lights. The HID gas discharge burner is equipped with a halogen bulb-type base, allowing it to be fitted within a headlamp housing that contains optics designed only for filament bulbs.
Do HID headlights get hot?
HID bulbs contain inert gas within the glass casing while LEDs are a solid state technology. HIDs emit a lot of heat and a large portion of their emissions fall in both the IR and UV spectrum.
Is HID halogen?
What Are HID Lights? HID or high-intensity discharge headlights work in a similar fashion to the halogen light bulbs. However, instead of using a halogen gas, they use xenon.
Can you convert HID to LED?
HID to LED: Lamp and driver (UL Type C) An LED lamp and driver is another option to upgrade your HID lighting. In this scenario, you remove the ballast, replace it with an LED driver, and add a light array (or bulb).
How do I test my HID ballast?
Step-by-step Instructions Step 1 – Change the HID Lamps. To make sure that your ballast is the problem, try to change the lamp first. Step 2 – Check the Voltage of the Ballast. Step 3 – Check the Wires. Step 4 – Change the Solenoids. Step 5 – Solder the Connections. Step 6 – Purchase a New HID Ballast Kit.
What voltage do HID lights use?
Like street lamps and fluorescent bulbs, HID headlamps require a high voltage ignition source to start. It typically takes up to 25,000 volts to start a xenon bulb, but only about 80 to 90 volts to keep it operating once the initial arc has formed.
How do HID bulbs work?
HID, or high-intensity discharge light bulbs and lamps, are a family of gas-discharge arc lamps which create light by sending an electrical discharge between two electrodes and through a plasma, or ionized gas. These lamps are known for their high efficiency at turning electricity into light and their long rated life.
How do I know if my HID is blown?
Signs That Your Ballast is Bad Dimming or Flickering Headlights. If your HID bulb cannot produce its full brightness or strobe periodically, this is most probably a ballast problem. Strange Sounds. Headlights Not Working. Changing Light Colors. Constantly Blowing Fuse. Damaged Casing. Burn Marks. Water or Oil Damage.
Why do my HID headlights flicker?
My HID lights are flickering. Flickering usually means the car is unable to supply enough power to the ballast. If your car has Daytime Running Lights (DRL) flickering is usually caused by the lower voltage needed to run the DRL at half power. The car’s factory harness does not provide enough power to the ballasts.
Can you repair HID ballast?
Do you want to know when to repair and when to buy a new ballast? If yes, you must learn how to reset HID ballast. Not all failures require a replacement; sometimes it is because of a damaged ballast. By resetting your ballast, you can make it work again, extend its operational life, you save money in the long run.
