Table of Contents
How do you decode a Briggs and Stratton model number?
The number model system consists of three series of numbers. The first number you find will be the model number, the second number is the engine type and the third number is the code number.
What do Briggs and Stratton type numbers mean?
The first digit after the displacement indicates the BASIC DESIGN SERIES, relating to cylinder construction, ignition, general configuration, etc. C. The second digit after the displacement indicates ORIENTATION OF CRANKSHAFT. The last digit indicates the TYPE OF STARTER.
How do I tell what model my Briggs and Stratton engine is?
Briggs & Stratton Engine Identifier The Model, Type and Code numbers, stamped directly into the engine, are used to identify our engines. Engines used in lawn mower applications usually have the model numbers stamped directly into the blower housing, muffler heat shield, or a few inches above the spark plug.
How do you read engine serial numbers?
Engine Serial Number composition the list number or build list, typically 2 to 4 letters followed by 4 or 5 numbers. a letter identifying the country. a series of numbers showing the build line, also called a serial number. a letter indicating the year of manufacture.
How do I look up something by serial number?
Visit the manufacturer’s website and see if there is a way to do an S/N number check on the website and see what information is available. If you don’t see that information online, give the company a call and see if someone on the tech support or customer service line can look up your product by serial number.
Where is the part number on a Briggs and Stratton carburetor?
Where can I find my engine’s part numbers? Your Briggs & Stratton engine part numbers can be found in your engine’s Illustrated Parts Lists (IPL). The numbers listed next to the part illustrations in our IPLs are called Reference Numbers.
How old is Briggs and Stratton engine?
Although we are known for our reliable engines and outdoor power equipment, we have a rich history. For over 110 years, Briggs & Stratton has cultivated a legacy of innovation that will last for years to come.
What HP is my Briggs and Stratton engine?
Where can I find my engine’s horsepower or torque rating? You can find the gross horsepower or torque value labeled on your engine. To find an engine’s horsepower, look for a number with “HP” or “cc.”.
How do I identify my engine?
Your VIN number is your vehicle identification number and you can find your engine size by VIN number. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine codes. Just tell the store clerk those two characters and you’re in business.
What is a Briggs and Stratton Intek engine?
• Intek engines are making the riding mower experience easier, smoother and more powerful. These ride-on mower engines come in two options – single cylinder and V-twin – that deliver between 10.5 to 24 gross horsepower for the power you expect from a Briggs & Stratton engine.
Where is the model number on a Craftsman riding lawn mower?
Riding mower model numbers are found by flipping the seat forward. The model number is printed on the left side of the Product Identification Label, attached to the underside of the seat, and starts with the letters, “CM”.
How do you decode GM engine numbers?
Read the next four digits in the code, which will be all numbers. This refers to the date that the engine was cast. The first two numbers are the month, and the last two are the day. For example, if the numbers read 0107, then the engine was cast on January 7.
What does the 8th digit in a VIN number mean?
Vehicle Description Section The fourth through eighth digits describe your vehicle’s model, body type, restraint system, transmission type, and engine code. The ninth digit is the check digit, which is used to detect fraudulent VINs.
Is VIN and engine number the same?
All modern motor vehicles are distinguished by a specific Vehicle Identifying Number, or a VIN. Both act as a serial number – and are different from engine numbers – but VINs contain much more detail than a chassis number, and VINs are always 17 characters long.
How do you tell what year a serial number is?
The 1st three numbers of your serial number will always provide your manufacture date. The 1st number is the YEAR of manufacture; the 2nd & 3rd numbers indicate the MONTH of manufacture.
How can you tell what year a serial number is?
As noted, the vehicle’s year is identified by a letter or number in the 10th position from the left in the VIN. As shown above, the 10th character of the VIN indicates its model year.
What serial numbers are worth?
According to the experts, a redesigned $100 bill with the serial number 00000001 could fetch anywhere between $10,000 and $15,000. Other typically low serial number bills (00000100 or lower) can be worth a little less, realizing up to $1,000.
How do I tell what model my carburetor is?
It’s like a “VIN” for your carburetor and should be hand-stamped on the front of the choke tower to the right of the vent tube on most typical Holley carbs. The list number typically is four to six digits long and may or may not have a suffix number behind it.
Where is the part number on a carburetor?
Look at the upper front of the carburetor on the piece known as the airhorn, or choke tower. This is a rectangular part of the carburetor with rounded edges, open to the top of the part. There will be a small number stamped there.
