QA

What Is Fascia On A Home

fascia. Trim is the material used to encase windows and doors, among other features, on a home’s exterior. Fascia is a horizontal or angled board that encloses the edge or face of the projecting eaves.

What is the purpose of fascia boards on a house?

The main purpose of the fascia board is to keep moisture from entering the roof and your interior. Sometimes, the fascia boards also provide support to the bottom row of tiles and slates. It also affects the overall appearance of your roof. Fascia boards give the edge of the roof a finished look.

What’s the difference between soffit and fascia?

An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.

What does fascia board look like?

A fascia board is most commonly a long, thin piece of wood. Many types of wood, from spruce to cedar, fit the bill. From the ground, these plastic boards will look very similar to wood, and most can be painted to match your aluminum or vinyl gutters.

What is the difference between eaves and fascia?

Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake.

Where does fascia go on a house?

The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.

How is fascia attached?

The fascia board is nailed to the rafter feet and usually has a rebate or lip for the soffit boards to slot into. They are then either fixed to a batten that is attached to the brickwork, or sat on top of the last course of brickwork.

Where is the fascia on a roof?

Roofing fascia forms the vertical finishing edge that connects your roofing to rafters, trusses, or gutter attachments. You see it beneath the roof’s overhang. Fascia is typically made of a wooden board or non-corrosive sheet metal.

Are fascia boards necessary?

The Best Fascia Tips You Will Read This Year. The short answer to this question is, “Yes!” They are undoubtedly necessary because they help cap the edges of the rafters, hold gutters in place to help ensure proper water drainage, and more.

What is the wood under the roof called?

The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”. The soffit is basically, any finishing material, such as wood or fiber cement, that is installed to cover the underside of your roof overhang.

What is best material for fascia?

Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.

How much does it cost to replace fascia boards?

1. Average Cost to Replace Fascia and Soffit Cost Per Linear Foot Total Cost* Low Cost $6 $1,500 Average Cost $10 $2,500 High Cost $20 $5,000.

How long do fascia boards last?

The average lifespan of wooden fascias is usually between 20 – 30 years if they have been maintained. The type of timber used and the quality of the original installation will affect how long they last. If wooden fascia boards are not maintained, they could need replacing in as little as 5 to 10 years.

What Does fascia and soffit look like?

The soffit is part of the overhang where your roof meets your siding. The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline.

What is the trim around the roof called?

Fascia: Vertical roof trim located along the perimeter of a building, usually below the roof level, to cover the rafter tails at the eaves and to seal off the top of the siding along the rake; also called gutter boards.

What is the outside of a house called?

Siding. Siding is the term for the exterior walls of the home.

Are fascia boards structural?

The fascia board is the one inch thick board that is nailed to the lower ends of the rafters, roof joists, or trusses to close the eave (Figure FB-1). Technically it is not considered a structural member, but it provides structural support for the gutters, when they are nailed to it.

How is fascia pronounced?

noun, plural fas·ci·ae [fash-ee-ee] for 1, 3-5; fas·cias [fey-shuhz] for 2.

How long does soffit and fascia last?

Unfortunately, fascias and soffits don’t last forever. Just like the other parts of your roof, they are constantly being exposed to damaging wind, humidity, sun, rain, and critters. It is a good idea to get in the habit of inspecting your fascias and soffits twice a year.

What goes on first fascia or soffit?

Fascia and soffit are installed after the roof installation is finished. It is ideal that soffit and fascia materials be installed before you place tiles or any other type of roofing material on the roof. There are different types of finished and variations that can be used for the soffit.