Table of Contents
Your Subfloor Will Get Wet – How To Combat Water While AdvanTech subflooring is engineered to withstand extensive water exposure with a 500-day No Sanding Guarantee,¹ you can take extra measures to protect your material if prolonged frozen, wet or dry cycles are anticipated when the wall framing isn’t up yet.
How long will AdvanTech last outside?
It can be left outside for 6 months or something like that without sanding -alot stronger than 3/4″ plywood, in both fastening holding and spans I even started using on theater stages due to water resistance (just needs oil based primer) HAve to make sure you get Advan tech, found out the hard way other brands look the.
How long can AdvanTech stay wet?
AdvanTech subflooring is engineered to withstand water exposure with a 500-day no sanding guarantee.
Can AdvanTech get rained on?
AdvanTech can sit in the rain for months and not swell at all. This product is truly a ground breaking product for the building industry.
Is AdvanTech better than plywood?
AdvanTech is a highly dense engineered wood. And its dense composition means nails/fasteners hold better than they do with plywood or OSB. To protect against warping or swelling from water or other moisture, moisture-resistant resin is applied to every strand of wood that goes into the flooring.
How do you seal AdvanTech?
Apply your oil based primer/paint, polyurethane or epoxy coating directly to the AdvanTech following the manufacturer’s recommendations for application. Be careful in choosing a coating for the AdvanTech because it may interfere with finish floor covering installation and performance.
Is AdvanTech fire rated?
AdvanTech flooring and sheathing panels are recognized as having a Class C (III) flame spread rating without need for test or label by HUD/ FHA Manual of Acceptance Practices, Section 405-8 to the Minimum Property Standards. Ship panels under tarp.
How long can you leave framing exposed to weather?
Try not to let your wood framing be exposed to the elements for more than a year or two. Most wood used to build houses and other structures is specially treated to be out in the elements. Wood framing should not be overexposed to the elements like weather, sun, wind, or rain for more than a few years.
What is the difference between OSB and AdvanTech?
Commodity OSB uses glues and a process that permits the panel to soak up moisture. AdvanTech panels use an advanced liquid resin that coats flakes during the manufacturing process to make sure the panel is thoroughly protected.
Can AdvanTech be sanded?
AdvanTech panels are manufactured with a highly moisture resistant resin and are guaranteed not to require sanding due to moisture adsorption.
How many sheets are in AdvanTech bundle?
Floor Panel, 1-1/8″ × 4′ × 8′ Performance Category Panel Size[3] Panels Per Unit 23/32″ Panel 4′ × 8′ 45 pcs 7/8″ Panel 4′ × 8′ 40 pcs 1″ Panel 4′ × 8′ 35 pcs 1-1/8″ Panel 4′ × 8′ 30 pcs.
How long can OSB subfloor be exposed to weather?
OSB 3 is classified as resistant to humid conditions. This is a liability choice to avoid misunderstandings. We have had OSB 3, also in horizontal orientation, exposed to rain for at least 4 months. Even puddles were forming and deliberately ignored by us.
What happens when sub flooring gets wet?
When Should I Replace a Subfloor After Water Damage? In cases of extensive water damage, drying the subfloor after a flood can be very difficult, and that complicates repairs. Soaked wood quickly develops mold and rot that impacts adjacent framing and drywall.
Is AdvanTech waterproof?
While AdvanTech subflooring is engineered to withstand extensive water exposure with a 500-day No Sanding Guarantee,¹ you can take extra measures to protect your material if prolonged frozen, wet or dry cycles are anticipated when the wall framing isn’t up yet.
Is AdvanTech a good subfloor?
Due to its high wood density, AdvanTech subfloors are able to hold their strength better and longer than standard competitors. The expert engineering of the material helps to provide bending ability, proper stiffness levels, and the power to hold nails securely, leading to the quiet floor residents crave.
Does AdvanTech have Formaldehyde?
The adhesives used to produce AdvanTech and ZIP System panels are a combination of exterior type phenol formaldehyde (PF) and isocyanate resins. This heat and pressure cure the resin into nonreactive and stable material. Isocyanate resins contain no formaldehyde.
Should AdvanTech subfloor be nailed or screwed?
Nails, screws and hybrid fasteners can be used with AdvanTech subflooring. Hybrid fasteners do no eliminate the recommendation to use subfloor adhesive. See the table below for proper fastener selection. The fastener must achieve at least 1-inch of penetration into the frame.
Will tile stick to AdvanTech?
Note: Do not install ceramic tile directly to AdvanTech subfloor panels. An approved underlayment must be installed over AdvanTech subfloor panels prior to ceramic tile installation.
How heavy is a sheet of AdvanTech?
AdvanTech Flooring Panels Thickness, Span Rating, Panel Weight, Panel Units by Mill Location Panel Thickness Approx Wt./Panel 19/32″ 23/32″ 7/8″ 1″ 1-1/8″ 68 lbs 78 lbs 94 lbs 110 lbs 124 lbs.
Can you use AdvanTech on roof?
AdvanTech flooring can be used as roof sheathing. Roof applications are generally designed using more liberal deflection criteria than floors (i.e., L/240 deflection criteria for roof live loads vs. L/360 or tighter deflection criteria for residential floor live loads).
Who owns AdvanTech plywood?
It’s the brand builders trust and homeowners depend on for squeak-free floors, and it’s been ranked #1 in quality every year for more than a decade. AdvanTech Subflooring is part of the Huber Engineered Woods family of products which includes the innovative ZIP System sheathing and tape.
