Table of Contents
What is the best tool to use to cut laminate flooring?
Jigsaw + special Laminate Cutting Blades The jigsaw is the best power tool to use to cut laminate floors with for a few reasons. It’s light, important because you’ll be picking it up all day. Also, the best blades are cheap.
How many teeth blade for laminate flooring?
Blades for Laminate Flooring In view of this, a thin kerf, 80 to 100 tooth, carbide-tipped blade is most effective for cutting laminates and will last for about 1000 sqft before needing to be re-sharpened.
How can I cut laminate flooring without chipping?
How to Cut Floor Boards Without Chipping Mark and measure where you want to cut the boards beforehand with chalk or pencil. Keep your board in place using a stand or a clamp. Wear goggles, a mask, and gloves. Use a table or circular saw to make long, straight cuts. For angles, use a utility knife or a jigsaw.
Can you cut laminate flooring with a blade?
A Carbide Tipped Blade or Carbon Steel Blade is best for cutting through laminate flooring. Most utility knives and linoleum knives in the market have these material compositions for their blades. Work through your laminate floors with a carbide tipped blade and cut with ease.
Do you cut laminate flooring face up or down?
Most laminate flooring boards have a surface coating of plastic that is vulnerable to chipping when you cut it. For this reason, it’s a recommended practice to cut from the back of the board. You can minimize the chipping when cutting face up by using a laminate-cutting blade in your saw.
Do you cut the tongue off the first row of laminate?
Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. If it is too short, cut a new plank in half and use one half to start the second row.
Can I use circular saw to cut laminate flooring?
A Circular Saw: You can also use a circular saw but it will require additional tools like a square and some type of work surface to cut the laminate flooring on. Sawhorses and a piece of plywood would make a pretty ideal workbench for this task and would be the easiest and most convenient method, in my opinion.
Is laminate flooring hard on saw blades?
This is because a reciprocating saw needs to bite into the material to create a clean cut, and laminate is a smooth surface that tends to just get scratched up by reciprocating saw blades. It’s better to use a miter saw, circular saw, or a jigsaw for laminate.
Which way up do you cut laminate flooring?
Leave the laminate facing right-side-up and cut it with a circular saw or handsaw.
How do you cut laminate with a utility knife?
When using a utility knife, it’s important to create a straight line while you cut. This will prevent any chips in the surface of the Formica. Also, be sure to cut the formica countertop facing down, to prevent chipping. If you cut it facing up, the coating is made out of silicone, so chipping will be likely to happen.
Can a laminate cutter cut lengthwise?
Generally speaking, you need to cut laminate flooring lengthwise when installing the first and last rows of laminate flooring, along the walls. We recommend you to draw the cut line on each laminate board, one by one, as to get the job done properly.
Should laminate be cut upside down?
4. Sawing laminate. If you’re sawing laminate with a hand saw, make sure you turn the good-looking side up. If you’re using a saw blade made for laminate, however, you should saw wit the good-looking side up, since a laminate saw blade as upside-down teeth, which means it splinters downward.
What part of the room should you start laminate flooring?
Always start hardwood flooring along the most prominent and noticeable wall in the room. This way, if the room is out of square, the crooked cut will be hidden under the cabinet’s toe kick. In order to keep the floor straight and square, start laying the laminate away from the wall because the wall may not be straight.
Which side of laminate do you start with?
The tongue is the side that you will want to place against the wall as you start your laminate-flooring installation.
Is more teeth on a saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish. The teeth are designed to cut aggressively, and deep gullets provide good chip removal.
What do you use to cut floating floor?
In fact, you can cut the planks using a table saw, miter saw, circular saw, hand saw or laminate cutter. However, using a diamond blade is recommended as laminate can be tough to cut through and may damage another type of blade.
Can you cut laminate with a 40 tooth blade?
To cut through laminate countertops, you can use a hand saw, but a circular saw makes the job much quicker. The best circular saw blade for cutting through laminate for a kitchen counter is one with many fine teeth — at least 40. Blades with carbide tips tend to last longer than regular steel.
