Table of Contents
Set footers a minimum of 6” below the frost line for your area to prevent movement during freezing temperatures. Pour about 6 inches of all-purpose gravel into postholes and pack the gravel tight by using the end of a wooden post.
How deep should a deck post hole be?
Dig the holes six inches deeper than the required frost line depth for your area, and slightly wider than the concrete footer tubes you’ll be using. A power auger can make this step easier and faster.
How deep should 4×4 posts be for a deck?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
Should deck posts be set in concrete?
A deck post should always be placed on top of footing, not inside concrete because it can break. Concrete tends to absorb moisture and wood expands when it gets wet, so these two factors combined will result in the wood breaking the concrete.
How deep should a 6×6 post be in the ground for a deck?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
How far apart should posts be for a deck?
Layout and Footing Locations Starting with your perimeter, mark the location of each deck post to locate the fitting position. In general, posts should be spaced no more than 8 feet apart. Some builders position them every 4 feet for a completely rigid frame.
Should deck posts be 4×4 or 6×6?
Deck posts must be a minimum of 4×4 according to the IRC but many jurisdictions require a 6×6 post as a standard. To avoid code violations, many deck builders choose the 6×6 even if the 4×4 is acceptable.
How deep should an 8 foot post be in the ground?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
What is the code for deck posts?
The posts should be a minimum 4×4 size and be solidly anchored to the deck joist and rim joist of the structure. Use two through-bolts and a metal tension tie for the upper bolt connection. If a deck’s guard-posts anchoring does not have a minimum allowable tension load of 1,800 lbs.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
Is it better to bury posts for a deck?
The buried post method offers the advantage of reducing the amount of concrete work required for each footing and actually provides additional lateral (side-to-side) support to the post to resist wind loads.
Will decking posts rot in concrete?
The post will only rot at ground level, it does not matter what you put in the bottom of the hole. A pressure treated post will last around 10 years. if you use metposts the post will still rot they just make it easier to replace & in my opinion they look horrible.
How much concrete do you put on a deck post?
45 cubic feet of concrete when mixed with 2.5 quarts of water. In order to have enough concrete for one cubic foot, you’ll require 2.2 bags of 60-lb concrete.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How many bags of concrete do I need for a 6×6 post hole?
How Much Concrete For A 6×6 Fence Post? Depth 50 Lb Bags 18″-21″ 6 22″-25″ 7 26″-28″ 8 28″-30″ 9.
How wide should a hole be for a 6×6 post?
A 6×6 post requires a 10″-diameter hole. Shovel a 6″ layer of gravel into the hole to provide drainage.
How many posts do I need for a 12×16 deck?
A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts.
Can you use 4×4 posts for a deck?
In the past, many decks were built with 4×4 support posts (also called structural posts). But these can bow seriously, even if a deck is only 3 feet off the ground. For that reason, we strongly recommend that you use 6x6s instead, even if your building department does not demand them.
How much load can a 4×4 post support?
4×4 can hold up to 4,000 pounds when laying horizontally with the right support. Vertically, a 4×4 should support 4300 pounds but can hold significantly more. The amount of weight that a 4×4 can hold depends on several factors like wood grade, species, and load type.
Is a 4×4 post stronger than 2 2x4s?
When used vertically, 4x4s are stronger than two 2x4s. However, if you need a horizontal surface, two 2x4s will be stronger than one 4×4. A 4×4 should not be used horizontally for anything structural. Always be sure that you’re using the proper size and strength of lumber.
Are 4×4 posts strong enough for a deck?
According to building codes, there is no clear answer on when you should install a 4×4 vs. 6×6 deck post. However, experienced contractors will tell you that a 4×4 post simply can’t carry the heavy load that many porches require.
