Table of Contents
Scrub the floor with trisodium phosphate (TSP) or a similar strong alkaline cleaner-degreaser and rinse with a hose. While the floor is still wet, sprinkle it with muriatic or phosphoric acid and scrub with a stiff-bristled nylon brush for a minute or so.
How do you clean a dirty basement?
Use a long-handled duster to sweep away those unsightly webs, paying special attention to the ceiling and corners of the basement. Vacuum. If you have a basement with a concrete floor, you can use a shop vac to collect the dirt and debris. Vacuums pick up more than your typical dustpan and broom will catch.
How do you mop a basement floor?
Once you’ve put on your protective gear, follow these steps: Ventilate basement using windows, fans, etc. Sweep the floor thoroughly. Mix soap and water until suds form. Mop the floor with a warm soapy mixture and allow it to dry.
How do you clean an unsealed concrete basement floor?
How to Clean Unsealed Concrete Floors Sprinkle sawdust on grease and oil stains. Sweep the floor with a push broom. Dust mop or vacuum the floor. Apply detergent and water on the stains. Scrub the stained spots with a brush. Mop with a baking soda solution. Rinse and wipe the floor dry.
How can I clean my basement fast?
You can speed up the process by keeping doors and windows open as much as possible, and by placing fans around the space to increase air circulation. Last but not least, wash your floors and walls to remove any dirt left behind by the floodwater.
How do you clean interior concrete floors?
How to Clean Concrete Floors Clear debris. Clean and clear the floor of all debris, dirt and dust using a vacuum, soft bristle broom or dry dust mop. Apply Simple Green Multi-Surface Floor Care. Spray the cleaning solution as a light mist across your floor section by section. Mop up in sections. Dry.
How do you clean dirt off a basement floor?
Mop concrete floor and walls with a bleach solution (3/4 cups of household bleach to a gallon of water.) Rinse and dry after 5 minutes. Open windows when applying the bleach solution.
Can you mop concrete basement?
If you have sealed concrete basement floors, you can mop them with a gentle cleanser as needed. However, if you have unsealed concrete floors, they are not waterproof. Unsealed concrete is porous and will absorb liquid. This is why you should avoid wet-mopping your unsealed concrete.
What is the best way to clean concrete?
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
How do you clean a basement concrete floor?
Mix a quarter cup of ammonia, a few squirts of dish soap, and water in a bucket. Use a nylon scrub brush with stiff bristles to scrub the cleaning solution onto the concrete floor. If your basement has a built-in drain, pour the cleaning solution directly onto the floor stains.
Can I pressure wash my basement?
Ideal for hard, non-porous surfaces like concrete floors and walls, pressure washers can clean up your basement a lot faster than using a sponge and some water. As long as you’re prepared to handle a potentially big clean up job, there is no better way than to get your basement sparkling clean.
What does vinegar do to concrete?
Etching – Vinegar’s ability to dissolve CaCO3 will dull your marble, travertine, concrete and terrazzo surfaces. It may “clean” the surface but it is also dissolving pits into the finish and effectively dulling it. This will affect marble, travertine, concrete and concrete terrazzo surfaces.
How do you deodorize a basement?
Place bowls of baking soda around the basement. The baking soda will begin to absorb the odors and should make a significant difference over the course of a few days. You can also use bowls of white vinegar or clean cat litter—both will absorb odors as well.
Why is basement so dusty?
Basements are great places for dust to collect because they usually have limited air movement and places for the dust to escape. There are several problems with dust in addition to simply looking bad.
What absorbs water in basement?
The best way to absorb water from your basement is to use the specially designed Water Absorbing Pads or Hydro Socks/Snakes that can soak up huge amounts of water. Use Sump Pump first to remove most of the water if you have a flood situation and there is a lot of water to soak up.
What to use to mop concrete floors?
You’ll just use a mop and a bucket of water mixed with a mild cleaner. Don’t use ammonia, bleach or any highly acidic substance on polished or stamped floors. Some good cleaners include Castile soap, liquid dish detergent, stone cleaners and mild floor cleaners.
How do you clean and shine concrete floors?
Regular sweeping and weekly cleaning with a mop and mild solution of dish soap and water should help concrete keep its shine. Every few months, use a pressure washer to clean dirt and debris from crevices. Make sure the concrete can handle the high-pressured stream of water before you tackle the entire project.
