Table of Contents
Square footage of board spacing = (S) x Length of deck First, convert the inches into feet (3.125 divided by 12) to get 0.26 feet. Then multiply 0.26 feet by 16 feet to get 4.16 square feet, the total area of board spacing.
How do you calculate linear foot railings?
To measure linear footage, start by measuring the length in inches. Then divide the total inches by 12. The length is the linear footage, so no fancy linear foot calculator is required.
How do you estimate paint for railings?
When painting just the deck and porch railings, it will cost $5 to $14 per linear foot. On porches, 25 linear feet of railings costs $125 to $350. For decks, prices range from $250 to $700 for 50 linear feet. For full projects, deck refinishing prices of $2 to $5 per square foot include all railings.
How much is deck railing per linear foot?
Deck railings cost on average $93 per linear foot, installed. This will vary from about $42 to $648 per foot. Labor charges will be about $30 per foot. Materials can run anywhere from $15 to $600 per foot.
How is railing quantity calculated?
Steps to Estimate Balusters and Spindles To account for the post thickness, simply multiply the number of posts by the thickness, then subtract from the railing length. For example, a 10′ railing with 3 3½”(4×4) posts would have a total length of 120″ – (3 × 3½”) = 120″ – 10.5″ = 109.5″.
How far apart are posts for a deck railing?
Spacing of Deck Posts The two most common sizes used for deck posts are 4×4 and 6×6. When using 4×4 posts, place them no more than 6 feet apart, and when using 6×6 posts, no more than 8 feet apart. The reason for these standards is that the railing system won’t have proper support if the posts are too far apart.
How do you convert square feet to linear feet for decking?
Take your deck square footage and divide by . 29. That’s how many linear feet of 1×4 (or 5/4×4) nominal decking you would need in a perfect world.
How do I calculate sq footage?
Basic formula for square feet Multiply the length by the width and you’ll have the square feet. Here’s a basic formula you can follow: Length (in feet) x width (in feet) = area in sq. ft.
How many square feet is 8 linear feet?
To calculate the area of a room in square feet, you need to make your measurements in feet. For example, the area of a room that measures 12 linear feet by 8 linear feet is 96 square feet.
How do you calculate deck railing paint?
How to Calculate Deck Paint Measure the deck with a tape measure. Multiply a section’s length by its width to get the square footage. Determine how much paint you will need to cover the total square footage. Double the amount of paint so you have enough for a second coat, since most decks require two coats of paint.
What is the average cost to stain a deck?
Average Cost to Stain a Deck The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.
How much stain do I need for a 20×20 deck?
The average cost to stain a deck is $1.57 to $4.04 per square foot, with most homeowners paying someone $450 to $1,000 for materials and labor.Average Cost To Stain A Deck. Deck size DIY cost Cost to hire someone 16×24 $157 – $406 $602 – $1,551 20×20 $164 – $422 $628 – $1,616 24×24 $236 – $590 $904 – $2,327.
What is the most cost effective deck railing?
Per Foot Material Cost of Deck Railing. As with all things deck, wood is the most economical choice. One of the easiest railing materials to work with and buy. Maintenance costs will come into play later, but with the initial cost, wood is your entry-level price for a basic railing design.
What is the most affordable deck railing?
For a basic deck railing, pressure treated lumber is the cheapest. Vinyl is best for low cost and low maintainance.
How much does it cost to install wood railing?
Average Cost to Install Railing Average Cost $900 High Cost $10,000+ Low Cost $700.
How do you measure for an outdoor handrail?
5 Easy Steps For Measuring Step 1 – Measure the overall height. Step 2 – Measure the overall length. Step 3 – Length of nosing. Step 4 – Depth of finished tread. Step 5 – Height of finished tread.
What is OSHA standard for handrail?
OSHA states that guardrail must reach a height of 42 inches, plus or minus 3 inches, above the walking-working surface and withstand a force of 200 pounds at any point in a downward or outward direction. If the railing dips below 39 inches, due to the force, the railing is not OSHA compliant.
How far apart should railings be?
In order to comply with building regulations and codes, balusters must be spaced no more than 4 inches apart on center. The general rule is that your railing must have three balusters per foot (every 12 inches), although you can place them closer together if you’d like.
How far apart should 4×4 deck railing posts be?
Do not overlook the importance of properly spaced deck post railings in the overall safety of your deck. Standard 4×4-foot deck posts must be spaced no more than 6 feet apart to provide adequate strength.
How far apart should 4×4 posts be on a deck?
For Building a Deck Railing, Deck Frame, or Fence The maximum spacing of 4×4 deck posts should be 6 feet on center, while the maximum spacing of 6×6 deck posts should be 8 feet on center.
