Table of Contents
The cost to tape and mud drywall is $0.35 to $1.10 per square foot and is typically included with finishing.Cost to finish drywall. Project Average cost 12×20 Master bedroom $750 – $2,600 16×20 Living room $850 – $3,100 20×20 Garage $1,000 – $3,900 1,000 SF Basement $1,500 – $7,000.
How much is a sheet of mud?
How much joint compound per sheet of drywall? 1.5 to 2 lbs. per 4×8 sheet. You’ll need anywhere from 1.5 to 2 pounds of joint compound per 4×8 sheet.
How much do drywall tapers charge per square foot?
How much do drywall tapers charge per square foot? The national average materials cost to tape drywall joints is $0.05 per linear foot, with a range between $0.04 to $0.05. The total price for labor and materials per linear foot is $0.91, coming in between $0.83 to $1.00.
How much does it cost to drywall?
The cost to install drywall is about $2 per square foot. After material and labor are added in, the cost per panel ranges from $60 to $90. A typical 12 by 12 foot room, for example, will use 18 panels.Drywall Cost Per Square Foot. Item Price Per Square Foot Total $1.50 – $3.
How much does a bucket of drywall mud cover?
The coverage rate is comparable to other USG ready-mix joint compounds. You can anticipate approximately two 4.5 gallon pails of Sheetrock® Brand UltraLightweight All Purpose Joint Compound to finish 1000 sq. ft. of gypsum wallboard.
How many boxes of drywall mud do I need?
As a general rule, estimate 0.053 pounds of mud per square foot of drywall. So, multiply the total number of square feet by 0.053 to determine how many pounds of compound you’ll need. For example, if you are putting up 1,600 square feet of drywall, you would need: 1,600 x 0.053 = 84.8 pounds of compound.
How much does it cost to hire someone to mud and tape?
The cost to tape and mud drywall is $0.35 to $1.10 per square foot and is typically included with finishing.Cost to finish drywall. Project Average cost 1,000 SF Basement $1,500 – $7,000 1,500 SF Whole house $5,500 – $22,000 2,000 SF Whole house $8,000 – $30,000.
How much does it cost to drywall a 2000 square foot house?
Our page on Average Drywall Installation Cost & Prices shows that the cost to drywall a house per square foot is roughly $1.30 – $4.00 per square foot. Average Cost to Drywall a House by House Size Cost to Drywall a 1000 sq ft House Total Cost Average x 6325 $12,100 High x 7250 $17,325 Cost to Drywall a 2000 sq ft House.
How much should I charge to tape and float?
The national average materials cost to tape drywall joints is $0.05 per linear foot, with a range between $0.04 to $0.05. The total price for labor and materials per linear foot is $0.91, coming in between $0.83 to $1.00. A typical 500 linear foot project costs $455.95, with a range of $412.97 to $498.92.
How much does it cost to drywall a 12×12 room?
The average cost to drywall a 12×12 room is $580 to $1,800. Drywalling a master bedroom or living room costs $850 to $3,100. Most drywall contractors charge higher rates per square foot for small jobs.
How much do I charge to hang drywall?
People typically charge about $1,800, or between $955 and $2,550 to hang drywall. Low-end jobs can run about $450 while high-end jobs reach $5,000 or more. That means you should charge between $1 and $3 per square foot for materials and labor for an average project.
How much does it cost to finish drywall per sheet?
If you want to DIY a drywall project, this is the size you want to pick. The cost to finish drywall at this size ranges from $10.00 to $15.00 per sheet on average.
How many buckets come on a pallet of mud?
Filled cartons of joint compound may be stacked a maximum of 3 layers high on a standard 42 x 42 or 42 x 48 pallet (16 pails per layer, 3 layers high).
How far does a box of drywall mud go?
A standard 4-by-8 sheet, for example, measures 32 square feet. Calculate that one gallon of joint compound will be needed to mud between 100 and 200 square feet of drywall. Realize that a number of factors may affect how much joint compound you will need.
What mud do you use for drywall?
Topping compound is the ideal mud to use after the first two coats of taping compound have been applied to a taped drywall joint. Topping compound is a low-shrinking compound that goes on smoothly and offers a very strong bond. It is also highly workable.
How much drywall do I need for a 1000 sq ft house?
For example, if your wall surface is 1,000 square feet and you’re using 4′ x 8′ sheets, then the number of sheets needed is 1,000 ÷ 32, or 31.25.
How much does it cost to tape and texture drywall?
Cost to Tape and Texture Drywall The total cost of installing drywall includes the cost of the drywall panels and materials, as well as the labor cost to hang, tape, finish and texture drywall. Most homeowners spend $3.25 per square foot to install, tape and texture.
How many pounds is a 5 gallon bucket of joint compound?
All Purpose 61.7 lb.
How much drywall can man hang in 8 hours?
If it’s just stacking full boards (like large commercial space) one after the other you could easily hang 40 a day. There are times where I have a room with maybe 12 and not one is uncut, that can take a full day itself, so it all depends.
What does Level 5 drywall mean?
Level 5 drywall has a high-quality skim coat over it. This thin coat covers the nails, tape, compound, and wall materials from the naked eye, creating a pleasing, completed look.
