Table of Contents
What does L1 and L2 mean on a light switch?
A one way switch has a common (C) and Line out (L1) terminal. A two way switch (for switching a light from two different locations like in a hallway) has a common (C) a L1 and an L2 terminal. L1 is off when L2 is on and vice versa depending on the switch position. You can use a two way switch for one way switching.
What is the common wire on a 2 way switch?
The 14/3 cable connects the 2 switches. The red wire connects the switches normally open terminals, and the black wire connects the normally closed terminals. And finally, the black wire of the light electrical box connects to the Up Switch common terminal.
Is L1 and L2 the same as 1 way and 2 way?
Two way switching means you can switch the same light fixture from two switches that are located in different sides of a room. Two way switches have a COM terminal as well as L1 and L2 terminals. When L1 is off L2 would be on. When L1 is on L2 would be off.
Does it matter which way you wire a light switch?
Originally Answered: Does it matter which black wire goes where when changing a light switch? If it’s a single pole switch with two terminals, the answer is no. One wire is the power to the switch and the other wire goes to the light.
How does 2 way switch work?
In the default state shown in the above image, the light is off. If either of the switches is toggled, the light turns on. To turn off the light, you can toggle any switch.Standard 2 Way Switch Wiring. Switch 1 COM (connected to) Switch 2 COM (connected to) Status of Light L1 L1 OFF L1 L2 ON L2 L1 ON L2 L2 OFF.
Is L2 live or neutral?
L1 is live and L2 is neutral.
What happens if you wire a switch wrong?
What can happen when you wire a smart light switch wrong? The switch may not work. If you do not connect the switch to the neutral wire, the switch will not have a power supply. If you damage the wires during installation, you could break the switch, or the wires could come loose.
Is L1 live or neutral?
The faceplate of a single, one-way switch has two terminals: “L1” is the terminal to which the neutral core wire is attached – the blue wire (traditionally black, before the change). “COM” or “Common” is the terminal to which the live core wire is attached – this is the brown wire (formerly red).
Do I need 1 way or 2 way switch?
So, whether you should opt for a one-way switch or a two-way switch is entirely your choice and needs. The one-way switch also called the single pole switch is effective in small rooms, and for domestic electrical appliances. And a two-way switch is apt for multi-door large rooms, stairways and long corridors.
What is the difference between 1 way and 2 way light switch?
1 way is an on/off switch and means there’s only one place you can turn your light on or off. This is the most common kind of switch found in most homes. Most 2 way switches can also be used as a 1 way on/off switch. 2 way means there’s another switch controlling the same light.
What wires go to l1 l2?
The incoming circuit wires that provide the power are referred to as the line wires. L1 (line 1) is a red wire and L2 (line 2) is a black wire.
Where does neutral go on a light switch?
The circuit’s neutral wire is in the junction box holding the light fixture. The two wires that come down to the switch from the hot leg powering the light itself. For smart switches that function without a neutral wire, a home hub is essential.
Why does light switch have 2 black wires?
You should see two black wires, each connecting to a different screw on the side of the switch. These are called terminal screws. These are ground wires.
Which wire is hot if both are black?
The black wire is the “hot” wire, it carries the electricity from the breaker panel into the switch or light source. The white wire is the “neutral” wire, it takes any unused electricity and current and sends it back to the breaker panel.
What happens if you reverse hot and neutral wires?
One common issue with electrical outlets is reverse polarity, also known as “hot-neutral reversed.” In this condition, the outlet has been wired incorrectly, altering the flow of electricity. While the outlet will still be able to provide power to your electrical items, it is also present a greater shock hazard.
What Colour wire goes to L2?
The yellow wire goes into the common terminal, red goes into the L1 terminal and blue goes into the L2 terminal.
Can you connect L1 to L2?
Two way switch Note that L1 and L2 are never connected together. This type of switch is used where two switches control one light, such as at the top and bottom of a stairway. It can also be used as a one way switch, by using the COM and L1 terminals only.
What color wire goes where on a light switch?
The white (neutral) wire connects to the silver screw, or you place it in the back wire hole on the same side of the device as the silver screw. The black (hot) wire goes to the brass screw or into the hole in the back of the device on the same side as the brass screw. This wire is sometimes red.
