Table of Contents
The answer depends on the size and shape of your deck, the size of your footings, and the size of your beams. The larger the beam and footing size, the fewer footings that are required. For most situations, you will want to place footings and posts less than 8′ apart.
How many support posts do I need for a deck?
The larger 12-foot side will have a post spacing of 6 feet at a minimum code requirement. That makes a total of eight posts that need to be installed on this average size deck. For aesthetic or symmetry reasons, more posts may be added.
How far apart do posts need to be for a deck?
For Building a Deck Railing, Deck Frame, or Fence The maximum spacing of 4×4 deck posts should be 6 feet on center, while the maximum spacing of 6×6 deck posts should be 8 feet on center.
How many 4×4 posts do I need for a deck?
You’ll need approximately one 8-foot 4 x 4 for every two deck posts. You’ll need one deck post connector and through bolt for each post. Consult your plans and local building code for code-approved hardware and connection methods. Railings: There are many railing options available in a variety of styles.
How many posts do I need for a 12×16 deck?
A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts.
How many posts are needed for a 10×10 deck?
A freestanding 10′ x10′ deck needs 4 posts, supporting two pairs of 2-ply non-incised 2×8 beam, upgrading the beam to 3-ply using incised wood.
How many footings do I need for a 12×12 deck?
For an attached 12 x 12′ deck, you’ll need at least 3 footings, plus at least 2 more if you’re planning on building stairs with it. If your deck will be a different size, it’s easy to figure out how many you’ll need.
Should deck posts be 4×4 or 6×6?
Deck posts must be a minimum of 4×4 according to the IRC but many jurisdictions require a 6×6 post as a standard. To avoid code violations, many deck builders choose the 6×6 even if the 4×4 is acceptable.
Can you use 4×4 posts for a deck?
In the past, many decks were built with 4×4 support posts (also called structural posts). But these can bow seriously, even if a deck is only 3 feet off the ground. For that reason, we strongly recommend that you use 6x6s instead, even if your building department does not demand them.
What size footings do I need for a deck?
FOOTINGS: – Poured concrete footings should be a minimum of 8” wider than the posts (4×4 post – 12” min. width, 6×6 post – 14” min. width), a two level deck or deck with roof – 24”x24”. – The bottom of the footings must be a minimum of 36” below finish grade level.
How many support beams do I need for a deck?
For a deck that is 15 feet wide with 2×10 joists spaced at 16 inches apart, you have two options. You can use two beams, one at 7.5 feet and one at 15 feet, to provide support.
Do deck posts need to be cemented?
A deck post should always be placed on top of footing, not inside concrete because it can break. When concrete is poured around a deck post in this way, the post will rot due to moisture buildup by the soil.
What is the code for deck posts?
The posts should be a minimum 4×4 size and be solidly anchored to the deck joist and rim joist of the structure. Use two through-bolts and a metal tension tie for the upper bolt connection. If a deck’s guard-posts anchoring does not have a minimum allowable tension load of 1,800 lbs.
Is a 12×12 deck big enough?
Urban Oasis — A deck measuring 12′ by 12′ is the standard size for many apartments and city homes. This amount of space is more than enough to fit a modest furniture set and still decorate with greenery and standing lights.
How much does it cost to build a 12×16 deck?
12×16-foot Raised Deck: You could build a 12×16-foot treated-lumber raised deck with stairs, for about $3,100 in materials. Hiring someone to do the work for you brings your total cost to $3,700-$9,500.
How many footings do I need for a floating deck?
For an 8×10′ freestanding deck, you’ll need six footings. Unless you have access to a power auger, that’s a lot of digging. After digging each hole, you will need to install tube forms into each. Each tube form then needs to be filled with one 60 lb.
How much does it cost to build a 20×20 deck?
The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
Should I use 2×6 or 2×8 for deck?
For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″.
How many footings do I need for a 10×10 deck?
Quick Attached Deck Footing Chart Size of Deck Beam Size Number of Footings 8′ x 10′ (2) 2×8 2 10′ x 10′ (2) 2×8 2 10′ x 12′ (3) 2×8 2 12′ x 12′ (2) 2×6 3.
Is 4×2 OK for decking?
4 x 2 Timber Rail / Joist These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.
What material do I need for a 12×12 deck?
You will need 18 boards of 2-by-6-inch lumber or nine 2-by-10 inch boards to build the joists, also known as the beams. You should purchase an additional 25 percent wood to allow for framing pieces and waste.
