Table of Contents
What is the easiest deck to build?
The easiest deck to build is an on-grade deck. It doesn’t require railings, stairs, or posts, but the essential elements of the deck—including the ledger, beams, piers, and joists—remain the same for all types of decks.
How do I build a budget deck?
5 Tips for Building a Deck on a Budget Scale Down Your Design. If you are planning a multi-level deck with a screened gazebo at the top, let’s face it, it won’t be cheap no matter what you do. Build in Off-season. Go With Wood. Less Customization. Do Cheap Without Sacrificing Quality.
Can I build a deck directly on the ground?
Yes, you can build a deck directly on the ground, but with some conditions. A deck on the ground must be built with ground-contact wood, and the substructure needs to be adapted for minimal height. The wrong joist and beam material in contact with the ground will quickly rot, making your deck, garbage.
What is the cheapest wood for decking?
Pressure Treated Wood Is a Solid, Cheap Decking Material. The most economical decking material, by far, is pressure treated wood. Pressure treated wood is superior to regular wood because it has been infused with chemicals that help it resist decay and rot, as well as damage from certain types of insects.
How many boards do I need for a 12×12 deck?
You will need 18 boards of 2-by-6-inch lumber or nine 2-by-10 inch boards to build the joists, also known as the beams. You should purchase an additional 25 percent wood to allow for framing pieces and waste.
What is the cheapest deck to build?
Pressure-treated wood, or chemical-treated wood, decks are generally the cheapest material to build decks with. For up-front savings, that seems great, but don’t forget long-term costs.
Can you use pallets as decking?
Pallet decking is a great way of enhancing your garden space without requiring a second mortgage. And as pallets are very strong and come in standard sizes, building a modular deck, depending on size and complexity, that is totally unique, could be done in a relatively short time.
Can pressure treated wood touch the ground?
Ground-contact pressure-treated lumber can be used either above ground or in contact with the ground. Has twice the level of chemical retention and protection compared to above-ground treated wood. Must be used when lumber is less than 6 inches from the ground or has poor ventilation.
What is a floating deck?
A floating deck is a deck that isn’t attached to a building and they “float” above the ground. Generally, floating decks are low to the ground and don’t require handrails or even staircases. They are sometimes called “grade-level” or “freestanding” decks because they’re built just above the ground level, or grade.
How do you frame a freestanding deck?
How to Build a Freestanding or Detached Deck Step 1: Layout & Prepare the Deck Site. Step 2: Dig Concrete Footing Holes. Step 3: Pour the Concrete Footings. Step 4: Install the Posts. Step 5: Build the Beam. Step 6: Set the Beam. Step 7: Install the Floor Joists. Step 8: Lay the Deck Boards.
What is a freestanding deck?
A freestanding deck is a beautiful addition to your home’s backyard landscape. This type of deck structure is self-supported and not directly attached to your home. It’s often the most practical choice for homes with brick or stucco exterior walls, which can make installing ledger boards difficult.
How many decking boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
What’s cheaper wood or plastic decking?
The upfront cost of plastic decking tends to be more expensive than the price of wooden decking. The minimal maintenance means that the upfront cost is likely to be the only time you need to cash out on your plastic deck. Although wooden decking comes at a lower upfront cost, the cost of maintenance will accumulate.
What material is cheaper for a deck?
Cost. Pressure-treated wood is hands-down the cheapest way to floor your deck. Redwood decking can be comparable to wood-composite materials, and exotic hardwoods can be much more expensive. Pressure-treated wood is also the cheapest material for the non-decking components, such as stairs, guards, and rails.
Should I use 2×6 or 2×8 for deck?
For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″.
What lumber Do I need to build a deck?
The three common choices when it comes to wood decks are redwood, cedar and pressure-treated wood that can be made of various types of wood species. Redwood and cedar are both naturally insect and rot resistant and have a natural look, but each has its own inherent issues.
