Table of Contents
Deck boards are typically 12 or 16 feet long, roughly 5-½ inches wide and about an inch thick – though specific dimensions can depend on the style of board you choose.
What is the standard width of decking boards?
Common deck board widths are 4”, 6” and 8”. The widths are readily available in most lumber or building supply stores, and the number of pieces easily calculated into deck dimensions. Other widths may be used for aesthetics and effect.
What is the width of a 5 4 deck board?
5/4 Decking Actual Dimensions 1″ x 5.5.” If you use 5/4 decking, you are getting two-thirds of the board of a 2×6.
How wide is a 1×6 deck board?
The same is true of pine. A 1×6, for example, actually measures 3/4″ x 5 1/2″.
What size are pressure treated deck boards?
x 16 ft. Standard Pressure-Treated Decking Board.
What decking boards are widest?
Wider than other composite decking boards Our new EvoDek+ Grey boards have a width of 158mm, making them noticeably wider than most other composite decking products.
What size boards are best for decking?
Width: Six-inch wide boards are ideal in most cases. Four inch wide material takes longer to install, creates more gaps and requires a lot more fasteners—but you can use it. Eight inch wide boards, because of their greater width, have more of a tendency to crack and cup; avoid using them.
How much space do you leave between decking boards?
Determining Deck Board Spacing When using wood decking, you want a gap of at least 1/8 of an inch after your decking has dried out. If you’re using decking that’s already been dried out, you can leave a 1/8-inch gap when you install. Many decks will use “green” wood, or wood that hasn’t been dried down or kiln dried.
What is the actual width of a 2×8 board?
Lumber Dimensions: Nominal vs. Actual Nominal Size Actual Size 2×4 1-1/2″ x 3-1/2″ 2×6 1-1/2″ x 5-1/2″ 2×8 1-1/2″ x 7-1/4″ 2×10 1-1/2″ x 9-1/4″.
Why do they call it 5 4 decking?
Quarters refer to the thickness of rough-sawn lumber measured in ¼-inch increments. Instead of reading it as a fraction, it should be read as a number of quarters: 5/4 is five quarters, 4/4 is four quarters, etc.
How wide is a 1×8 board?
Nominal vs. Actual Measurements of Dimension Lumber Nominal Size Actual Size 1 x 6 3/4 x 5 1/2 inches (19 x 140 mm) 1 x 8 3/4 x 7 1/4 inches (19 x 184 mm) 1 x 10 3/4 x 9 1/4 inches (19 x 235 mm) 1 x 12 3/4 x 11 1/4 inches (19 x 286 mm).
What size are deck joists?
Commonly used joist sizes are 2-by-6, 2-by-8 and 2-by-10. For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.
How thick is a decking board?
NOTE: Standard boards are often called a 5/4 board when referring to traditional lumber, which means the actual thickness is typically somewhere between 1” and 1 ¼”. Thicker boards are often called a 2 x 6 when referring to traditional lumber, which means the actual thickness is somewhere between 1.2” and 1.5”.
How many deck boards do I need for a 12×12 deck?
For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists. 20 fasteners x 26 (number of rows of decking) = 520 fasteners. Add 10 percent to be safe.
What size wood is used for decks?
For the deck surface, you can use 2x4s, 2x6s, or 5/4x6s. The 5/4 decking (pronounced “five-quarter”), available in cedar and pressure-treated fir, is 1 inch thick and 5-1/2 inches wide with rounded edges that make for a splinter-free surface. Cedar 1x lumber usually has one rough side and one smooth side.
Is it better to nail or screw deck boards?
The Consensus: For a deck build it’s best to use a combination of nails and screws. Screws are superior for laying down the decking. They hold things flush better and have a better fastener/tensile strength, which keeps boards from popping up over time.
What size is a large deck?
A small deck intended to hold a round dining table should be at least 12 feet by 12 feet, while a large deck can be designed with much more space. The average deck size is between 300 and 400 square feet. Generally, a deck should be wider than it is deep, with the longer dimension running along the house.
What is the widest composite decking?
Do Decking Differently Standard-width decking is not the standard anymore. You can now choose wide (7.25″) or narrow (3.5″) widths, in addition to standard (5.5″)-width boards, to add a touch of the unexpected – and an element of style.
What is a 5 4 inch board?
5/4 means approximately 1-1/4″ thick. 6/4 means approximately 1-1/2″ thick. 8/4 means approximately 2″ thick.
