Table of Contents
Length: When possible, buy decking that can run the full length of your deck. All lumberyards and home centers carry 16-ft. deck boards, but many also stock or can order 20- and 24-ft. boards, though they may cost more.
How long is a standard decking board?
The length of the decking board varies. It varies from 6 to 20 feet. You can choose a board size that is suitable for your deck size.
How long is a 16 foot deck board?
x 16 ft.; Actual: 1.5 in. x 11.25 in. x 192 in.).
What size do decking boards come in UK?
How wide are deck boards? The most common decking widths are 90mm to 150mm, with 120mm and 140mm in between. The width option you choose for your project can make a big impact in the ultimate effect, so get creative to achieve the best look for your decking while staying within your budget.
What is the most common deck board size?
The most common or standard deck board width is 6-inch wide planks based on square-foot coverage, labor, and material cost.
What are the actual dimensions of 5/4 decking?
5/4 Decking Actual Dimensions 1″ x 5.5.” If you use 5/4 decking, you are getting two-thirds of the board of a 2×6.
How many deck boards do I need for a 12×12 deck?
For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists. 20 fasteners x 26 (number of rows of decking) = 520 fasteners. Add 10 percent to be safe.
What size is a large deck?
A small deck intended to hold a round dining table should be at least 12 feet by 12 feet, while a large deck can be designed with much more space. The average deck size is between 300 and 400 square feet. Generally, a deck should be wider than it is deep, with the longer dimension running along the house.
How long will decking last?
THE AVERAGE LIFESPAN OF A WOOD DECK: Typically 10 to 15 years. The actual lifespan of your wood deck will depend on the type of wood you’ve chosen and how well you keep up with wood’s rigorous maintenance schedule.
What is the longest deck board you can buy?
Length: When possible, buy decking that can run the full length of your deck. All lumberyards and home centers carry 16-ft. deck boards, but many also stock or can order 20- and 24-ft. boards, though they may cost more.
What decking boards are widest?
Wider than other composite decking boards Our new EvoDek+ Grey boards have a width of 158mm, making them noticeably wider than most other composite decking products.
How wide is a 6 inch deck board?
Lumber sizes are usually given in “nominal” measurements. The nominal measurements are a board’s size before it has been planed smooth (surfaced) on all 4 sides.Dimensional Lumber. Nominal Size Actual Size 6×6 5-1/2″ × 5-1/2″.
What size wood should I use for my deck?
For the deck surface, you can use 2x4s, 2x6s, or 5/4x6s. The 5/4 decking (pronounced “five-quarter”), available in cedar and pressure-treated fir, is 1 inch thick and 5-1/2 inches wide with rounded edges that make for a splinter-free surface. Cedar 1x lumber usually has one rough side and one smooth side.
Should deck boards have a gap?
When using wood decking, you want a gap of at least 1/8 of an inch after your decking has dried out. If you’re using decking that’s already been dried out, you can leave a 1/8-inch gap when you install. Many decks will use “green” wood, or wood that hasn’t been dried down or kiln dried.
How long is a 12 foot board?
Softwood Lumber Lengths Length in Feet Length in Inches Length in Meters 6 feet 72 inches 1.829 meters 8 feet 96 inches 2.438 meters 10 feet 120 inches 3.048 meters 12 feet 144 inches 3.658 meters.
How far can you span 5 4 deck boards?
Decking Board Considerations If you use 5/4 decking, joists must be no farther apart than 16 inches. Decking made of 2x4s or 2x6s can span up to 24 inches.
Why do they call it 5 4 decking?
Quarters refer to the thickness of rough-sawn lumber measured in ¼-inch increments. Instead of reading it as a fraction, it should be read as a number of quarters: 5/4 is five quarters, 4/4 is four quarters, etc.
How do you stagger deck boards?
A common method for staggering a deck is to start the first row with a full plank, then cut one-third of the next row’s first board off the end. The row after that has an additional one-third cut off and then repeat when you get back to a full board.
How many decking boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
How do you calculate decking for timber?
You do this by taking the length and width of your decking and times them by each other. To find out how many lineal meters you need, take your square meters and divide it by the width of the decking boards.
Should I use 2×6 or 2×8 for deck?
For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″.
How much does it cost to build a 20×20 deck?
The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
