Table of Contents
How to Refinish a Dresser Step 1: Choose a Stain. Staining beautifies wood and helps reduce the contrast between the different types of grains in different pieces of furniture. Step 2: Remove Hardware, Drawers and Clean Surfaces. Safety Alert! Step 3: Remove Old Finish. Step 4: Apply Sanding Sealer. Step 6: Finish It.
Do you have to sand a dresser before staining?
Sanding and staining are important steps in achieving a professional finish on a wood dresser. Sanding smooths the wood grain during the prep phase and removes dust during the finishing phase. Remove all of the old finish on an existing dresser before starting.
What kind of paint do you use on a wood dresser?
For furniture, it’s best to use a satin or semigloss finish in either a latex or an oil-based paint. Never leave primer unpainted. If you choose a latex paint, a latex primer is an excellent choice for most uses. It goes on easily and blocks most stains, and it doesn’t have the odor of an oil-based primer.
How do you refinish a dresser without stripping?
How to Paint a Dresser Without Sanding Step 1: Prepare the Surface. Wipe the dresser and drawers down thoroughly with warm, soapy water to remove the grime and oils. Step 2: Apply a Stain Blocker. Step 3: Paint. Step 4: Seal and Protect.
What happens if you sand after staining wood?
Sanding before knocks down the fibers. Making it wet with stain or other finish sometimes makes the fibers stand up again – called raising the grain. Sanding after an early finishing step will knock down this fuzz and make your surface and finish appear smoother than if the grain were left raised.
How do you sand a finished dresser?
Sand the dresser using a medium-grit sandpaper, moving with even pressure and in the direction of the grain. Sand thoroughly, including all details. Wipe down with a tack cloth to remove dust. Sand again with a finer-grit sandpaper.
How do you refinish finished furniture?
Clean. Any refinishing furniture DIY starts with basic cleaning. Examine. Take an overall assessment of the piece and determine if it needs any repairs. Remove the Old Finish. Sanding. Chemical Stripper. Seal the Wood. Stain or Paint. Apply Finish.
How much does it cost to refinish a dresser?
The average cost of $100 to $700 largely comes down to the type of furniture you’re looking to refinish and the condition of that piece.Furniture Refinishing Price Guide. Type Per Piece Price Range Dresser $300-$1,000 Bed $350-$900 Pool Table $300-$500 Kitchen Cabinets $1,600-$3,800.
How do you paint an old wood dresser?
Instructions Sand the Existing Finish. If your dresser has a smooth finish and is in good shape, feel free to skip this step if you are using chalk paint. Clean the Dresser and Let It Dry. Remove any dust and debris from the surface. Roll on a Coat of Paint. Trim With a Brush. Buff on a Wax Finish. Reattach Your Hardware.
What happens if you stain over stain?
If one section dries and is then overlapped, you are effectively applying a second coat to that overlapped area, and this will lead to blotchy finish. If the stain pools during application, you are applying too much at once; cut back.
How much should you sand before staining?
For “hard to stain” woods, finish sanding with 120 grit will usually accommodate the problem. For finish sanding on most furniture hardwoods (e.g., cherry and mahogany) use 180 grit or 220 grit. The use of grits up to 600 is certainly allowed but is not standard practice.
Is it better to sand or strip furniture?
Stripping is Faster and Often Safer. Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. Jan 3, 2018.
How do you restore old wood furniture without stripping?
How to restore wood furniture without sanding and stripping Remove any hardware. Wipe on mineral spirits. Clean the surface. Fix the white rings. Fill small cracks and imperfections. Try to fix the dents. Restore the colour with gel stain. Renew the lustre with a wipe-on finish.
How do you restore furniture for beginners?
How to refinish furniture Clean the furniture thoroughly. If it’s an older piece of furniture, there’s a good chance it’s built up some dust, dirt, and grime. Strip the wood. Sand it down. Seal the wood. Apply your paint or stain. Finish your piece.
What happens if you don’t sand wood before staining?
You need a smooth surface with no blemishes because stain will highlight scratches and dings in the wood. Always sand down to clean wood (if you have enough meat left of the wood) before applying any stain. Too fine and the wood won’t be able to accept the stain.
Can I polyurethane over stain?
Yes, you can. In fact, you can also put oil-based polyurethane over the water-based stain. As long as the stain has dried and cured, you can put any type of polyurethane on top of it. Of course, you would need to sand the surface as usual and apply the polyurethane as you would.
Do you need to sand between stain and polyurethane?
You don’t need to sand after staining before applying polyurethane. You only need to allow enough time for the stain to dry before applying polyurethane. But, if you are a perfectionist, you can feather sand the surface using super fine-grit sandpaper(400-500).
Can you sand wood stain off?
Sand out the stain To sand wood previously stained you must start by using medium-grit sandpaper followed by a progression of increasingly finer sandpaper grits. This should remove most of the color left by an old stain. If you’re applying a new stain, it should mask any residual color.
