QA

Question: How Long Are 84 Inch Curtains

Are 84 inch curtains long enough?

Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don’t look right in most scenarios and end up being an awkward length,” says Curtis.

How big is an 84 inch curtain panel?

The sizes are listed width by width. The curtain panel is 54 inches wide by 84 inches long. Before choosing curtains, it is advisable to install a curtain rod.

What length should curtains be?

How Long Should Curtains Be? Floor-length is the way to go, unless there’s a radiator or a deep sill in the way. Ready-made panels are available in lengths from 63 to 144 inches. Measure from the floor to where you’ll hang the rod, then round up.

What size curtains do I need for a 6ft window?

A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

How do I know what size curtains to buy?

Measure the Width Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.

How are curtains measured?

Curtains are measured from the top of the rod pocket to the end, not from the actual top of the curtain if there is fabric above the rod pocket.

What are standard curtain widths?

Width: When we list or write curtain measurements, the width always comes before the drop. Ready-made curtains are available in three standard widths: 112 cm (44 inches), 167 cm (66 inches) or 228 cm (90 inches). You should choose the width that most closely matches the size of your track or pole.

What does Panel mean for curtains?

A panel is a length of fabric, hemmed at the bottom, that hangs in front of a window. It may be tab- or tie-topped; have grommets; be one of two panels that form a set of curtains that cover a window when pulled closed; or be a fixed, flat panel of cloth over the window.

How far below a window should curtains hang?

While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.

Are short curtains ever OK?

Visually speaking, high-water style is not the most appealing way to hang curtains. The shorter length can appear dated. Also, it can cut the visual height of your room in half. From a purely practical standpoint, however, short curtains are sometimes the best option.

How much longer should curtains be than window?

How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod.

How far should a curtain pole extend past window?

For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again.

What size curtains do I need for 8 foot ceilings?

For an 8-foot ceiling, your curtain panels should probably be about 91 inches long. If you don’t want to get custom window panels, you can buy 96-inch ones and hem them so they are floor to (almost) ceiling.

What size curtains do I need for a 60 inch window?

For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.

Are curtains measured per curtain?

All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.

What size curtains do I need for a 72 inch window?

Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).

What is the shortest curtain length?

Sill: 1/2″ above the window sill. These are the shortest of the standard curtain lengths, which makes them a good opportunity to have some fun with pattern or color.

How do you measure for curtain fabric?

To measure fabric for curtains, start by measuring the width and height of your window. If you want floor length curtains, measure from the bottom of the window to the floor, subtract 1 inch, and add that number to the height of the window to get the height of the fabric you should use.

Do you double the width for curtains?

The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.

What size curtain is 90 90?

So if you purchase a pair of curtains that are 90 inches X 90 inches , you will receive two curtains 90 inches wide by 90 inches drop.

What are the different sizes of curtains?

There are four standard lengths for curtains: 63, 84, 96 and 108 inches. These lengths are used for pre-made, mall ready curtains. They come in a range of styles and designs from sheer to blackout, fabric, etc.