Table of Contents
Are 63-inch curtains short?
The 63-inch length for curtains is on the short side of the spectrum. Going up from 63 inches, curtains are available in lengths that include 84, 95, 108, and 120 inches. Some styles of curtains are less than 63 inches, but these are considered tier curtains, and are a bit different from the typical window dressings.
What is the typical length of curtains?
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings.
Where should 63-inch curtains fall?
This will ultimately depend on the length of your window, but as a general rule, curtains will hang to the following points on most windows: 63 inches: To the windowsill. 84 inches: To the floor. 95 inches: Puddles onto the floor.
What is the shortest curtain length?
Sill: 1/2″ above the window sill. These are the shortest of the standard curtain lengths, which makes them a good opportunity to have some fun with pattern or color.
What size curtains do I need?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
What size curtains do I need for a 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How is curtain length measured?
Consider Available Curtain Lengths Curtains are measured from the top of the rod pocket to the end, not from the actual top of the curtain if there is fabric above the rod pocket.
How do I measure curtain width?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
What does 63 panel mean for curtains?
If the top of the window is 84″ from the floor, a 63″ curtain will hang 21″ from the floor. On many windows in modern houses with a 30-33″ sill height this will put the curtain length at some point on the wall below the window.
What curtain length is longest?
Puddle length: The longest and most formal type of curtains, puddle length typically means 108 inches or more. This look is often seen in living rooms, formal sitting areas or in homes with high ceilings.
Should you hang curtains above window?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
What is standard curtain width?
It can vary from 50″ up to 58″, and some fabrics, especially sheers, can some in double width at 108″ wide. But the standard in the U.S. is 54″.
How much longer should curtains be than window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod.
Can you put long curtains on a short window?
Hanging long drapes on a short window is one of the easiest ways to increase the importance of the window and bring it into proportion to the room. The correct design and length will minimize poor window style and hint that the window is much grander than it actually is.
What size curtains do I need for a 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
Are curtain sizes per curtain?
Step 1: How to measure curtain width All our ready made curtains are sold as pairs, and the sizes stated refer to the size of each curtain. For example, in a pair of curtains 46″ wide x 54″ length, there will be two curtains, each measuring 46″ wide.
How do you measure for curtain fabric?
To measure fabric for curtains, start by measuring the width and height of your window. If you want floor length curtains, measure from the bottom of the window to the floor, subtract 1 inch, and add that number to the height of the window to get the height of the fabric you should use.
Do you double the width for curtains?
The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.
How many curtain panels do I need calculator?
Determine the number of panels you need to order: ~ Multiply window width by 1.5 to 2 if you want curtains loosely gathered for a relaxed, tailored look. Divide your total by the width of a single curtain panel to get the number of panels you need.
What does a curtain panel look like?
A panel is a length of fabric, hemmed at the bottom, that hangs in front of a window. It may be tab- or tie-topped; have grommets; be one of two panels that form a set of curtains that cover a window when pulled closed; or be a fixed, flat panel of cloth over the window.
