Table of Contents
To calculate the size of the air conditioner you need for a room, first, multiply the length of the room with its width. Then multiply it with 25 BTU to get the ample cooling for the room under different weather conditions. For example, if the room is 15 feet long and 12 feet wide, it comes to 180 square feet.
How many square feet will a 3-ton AC cool?
3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.
How many sq ft will a 2.5-ton AC cool?
For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.
How much should a 3 ton AC unit cost installed?
AC Installation Costs by Tons Central Air Conditioner Size AC Unit BTU AC Unit Only 2.5 Tons 30000 BTU $2,895 3 Tons 36000 BTU $2,920 3.5 Tons 42000 BTU $3,550 4 Tons 48000 BTU $3,650.
Do I need a 4 ton or 5 ton AC unit?
The answer to the question, “what size AC unit for 2400 square feet?”, would be, is 60,000 BTUs or 5 Tons. It’s possible to fall between unit sizes, so if that’s the case with you, then you should choose the next higher size.
Can you replace a 2 ton AC unit with a 3 ton?
Simple answer: yes. But that really depends on the size of you house and its condition. If the 2 ton unit is working as designed but seems to run continuously without satisfying the thermostat setting, then it might be undersized and replacing it with a 3 ton unit might be the answer.
What size air conditioner do I need for a 2300 square foot home?
ZONE 1 ZONE 5 2.5 Tons 1201 – 1500 sf 1401 – 1650 sf 3 Tons 1501 – 1800 sf 1651 – 2100 sf 3.5 Tons 1801 – 2100 sf 2101 – 2300 sf 4 Tons 2101 – 2400 sf 2301 – 2700 sf.
Is the a big difference between a 2.5 ton and 3 ton AC?
The general guideline is a 2.5 ton unit for a home that’s 1,500 to 2,000 square feet. A 3 ton unit is ideal for a home that’s 2,000 to 2,500 square feet.
What SEER rating should I buy?
There’s no magic SEER number. Anything over 13 is great. Because if you have an old 8 SEER system and replace it with a 16 SEER unit, you could significantly reduce the cost of cooling your home. Don’t forget to look at tax credits and manufacturer’s rebates that can bring the down the cost of a high SEER system.
Is it cheaper to replace furnace and AC together?
Adding a furnace during your air conditioner replacement will cost a lot less, around $1,000 to $3,000. The only time it really makes sense to wait to replace your furnace is if it is less than 10 years old. This way, the furnace will most likely last until the next time your air conditioner needs to be replaced.
Does a new AC unit increase home value?
One appraisal estimate in Money magazine says that installing a new central air-conditioning system will increase your property value by 10%. Our agents modify this a bit, noting that while they would price a home with central AC higher than one without, the pricing depends on other market conditions.
How much does a 5 ton HVAC unit cost?
On average, you can expect a 5 ton AC unit to cost about $3,700, while a 3 ton AC unit can cost as little as $2,900. It’s important to remember that the price you pay for HVAC system components also depends on where you shop. A 5 ton AC unit that costs $3,700 from one shop may only cost $3,200 from another.
Can you replace a 4 ton AC unit with a 5 ton?
A 5 ton outdoor unit will not work with a 4 ton indoor coil and air handler or furnace. The freon won’t boil off correctly.
What size air conditioner do I need for a 2000 square foot home?
Step 5: Match your square footage to an HVAC size chart Home Sq Footage Air Conditioner Size (tons) 600 – 1,000 square feet 1.5 tons 1,000 – 1,500 square feet 2 tons 1,500 – 2,000 square feet 3 tons 2,000 – 2,500 square feet 4 tons.
Is 2.5-ton AC big enough?
According to this common but somewhat inaccurate method, you need 1 ton of air cooling capacity for every so many square feet of living space. While there’s some dispute over the exact amount, an often-used amount is 600 square feet. A 2.5-ton unit, then, theoretically would fit a 1,500-square-foot home.
What happens if my AC unit is undersized?
A properly sized unit will kick on and off periodically to control the temperature. Undersized air conditioners will struggle to ever get the room cool enough and therefore will fail to go through healthy on and off cycles. This extra wear and tear will lessen the life of your ac and cost you more in repairs.
How much does a 3 ton Lennox AC unit cost?
Lennox AC Units Priced by Unit Size Unit Size Cooling Area Installed Cost 2 Tons 1000 – 1300 sqft $3,399 2.5 Tons 1300 – 1600 sqft $3,575 3 Tons 1600 – 1900 sqft $3,798 3.5 Tons 1900 – 2200 sqft $4,275.
