Table of Contents
Allow approximately 12 yards of fabric as a base estimate for a 6-foot-long, 2-cushion sofa. Increase that to 14 yards for a 7-foot sofa. Estimate an additional 1.5 yards of fabric per cushion for a sofa with more than two cushions — so a 7-foot-long, 6-cushion sofa would require around 20 yards of fabric.
How much fabric do I need to cover a 3 seater sofa?
A standard 3 seater sofa will need between 11m and 18.5m depending on the arms, height of the back and any extra details. If you have a large corner sofa then expect to need approximately 30m to cover all the cushions and sofa structure.
What is the average cost to reupholster a couch?
Sofas cost between $500 and $4500 to reupholster. The average cost of reupholstering a sofa is $1800. This includes your new fabric cost and labor costs associated with reupholstering. Usually fabric ranges from $10-$70 a yard with labor cost ranging from $40-$100 per hour.
How do I calculate yardage for upholstery?
Total number of pieces divided by number of pieces that fit into width equals number of rows you need. Number of needed rows multiplied by length of one piece equals total project in inches. Total project inches divided by 36 inches equals total yardage needed (rounded up to the whole number).
How do you measure fabric for upholstery?
If your chair is larger than average, measure the width the same way as you would measure the length at its widest point. If you have more than one chair that you are reupholstering, multiply the number of chairs by 0.75 and divide by 2. This will give you the total amount of yardage you will need for your chairs.
Is it cheaper to reupholster a couch or buy a new one?
Reupholstery can be a great way to give furniture you love a new life. It tends to cost more than buying new, so it’s better for pieces that have special value. If you have an antique chair with a great frame, or a modern couch with a single torn cushion, reupholstery might be a wise decision.
How much material do I need calculator?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.
Can I reupholster my sofa myself?
Reupholstering a couch or loveseat isn’t an easy DIY project—it is time-consuming and requires research and note-taking. Once you’re ready to start your new upholstery project, check out our step-by-step guide: Study your couch. Taking notes and photos for future reference can you save a lot of time down the line.
How difficult is it to reupholster a couch?
It doesn’t require any highly technical skills, but there are a lot of steps and it can quickly become overwhelming. I would not recommend taking on a sofa as your first upholstery project – at least do a few simple dining room chairs first to get a feel for the process.
How often should you replace your sofa?
How often should you replace a sofa? The common consensus is that an average sofa will remain in prime condition for around seven years, after which a drop-off will begin. A top-quality sofa might even see you through 15 years of family life, but even that will succumb to sagging eventually.
How many yards of fabric do I need for a 2 seater sofa?
Count your cushions, including both upper and lower cushions. Depending upon your sofa, you may have as many as six cushions. Allow approximately 12 yards of fabric as a base estimate for a 6-foot-long, 2-cushion sofa.
How much fabric do I need to reupholster a chair?
As a general rule, using 54″ wide fabric, 3/4 yard will work for 2 chairs. Three-quarters yards will give you two pieces that are 27″ x 27″. If you have four chairs, you will need 1.5 yards, six chairs takes 2.25 yards, eight chair seats take 3 yards, and so on.
What is the standard width of upholstery fabric?
The most well-known width for upholstery fabric today in the United States is 54 inches;, 48-inch-wide upholstery fabric is discovered both here and in Great Britain, and 40-and 42-inch widths are standard for some, imported upholstery fabrics, similar to Indian silks.
Can I reupholster over existing fabric?
So long as the old fabric isn’t darker than your new fabric, you can even upholster right over it.
Do you have to remove old fabric before reupholstering?
You can reupholster over old fabric as long as the new fabric is darker than the original color. If you want to cover the stapled side of the seat neatly, add a dust cover to the underside of the chair. Make pleats when upholstering furniture with curved edges.
Can you reupholster a couch without removing old fabric?
There is no need to remove the old fabric. Now, simply tuck your fabric and staple with your hand powered staple gun. I used a compressor and heavy duty staple gun with 1/4″ staples. Be sure to staple to the wood part/frame of the sofa.
How do I know how much fabric I need for a pattern?
Start with your desired total width and divide by the width of the fabric. Round up to the next whole number. This is how many widths of fabric you need. Then take the total desired length and multiply by the number of widths you just calculated.
How much 2×4 do I need?
Multiply the total wall length by 0.75 to figure out the number of studs needed. Three studs are needed for each corner. Each corner should have four studs added.
How much Roadbase do I need?
Generally, road base is layed to a total depth of 100 to 150mm (10-15cm) around the entire area. For driveways, compact for every 50mm (5cm) layer and for pathways compact for every 60mm (6cm) layer. For 10m2 compacted to 100mm (10cm) you will need 1 cubic metres.
