Table of Contents
For tough stains: place a towel soaked in a vinegar and baking soda paste or hydrogen peroxide onto the stain(s) and allow the towel to sit for up to 1-hour. Use a cloth or sponge to remove the dissolved dirt and scum from the tub. Rinse the tub and use a microfiber cloth to remove excess paste or solution.
How do I get my bathtub white again?
Make a bathtub cleaner paste of one part hydrogen peroxide to two parts baking soda (or cream of tartar). Rub the paste on the stain and let stand for 30 minutes to one hour, then wipe and rinse. If necessary, repeat until the stain is gone.4 days ago.
How do you get tough stains out of a porcelain tub?
If you have any tough-to-remove stains on the tub, cover them with salt and squeeze the juice of half a lemon on top. Or, you can try two parts baking soda and one part hydrogen peroxide set on a stain for about 30 minutes. Use a clean cloth or sponge to scrub the salt mixture into the stain and remove it.
What is the strongest bathtub cleaner?
Here are the best bathtub cleaners of 2021 Best bathtub cleaner overall: Mr. Best bathtub cleaner for hard water and rust stains: CLR Pro Calcium, Lime, and Rust Remover, $5.87 from The Home Depot. Best bathtub cleaner for mold and mildew: Clorox Plus Tilex Mold and Mildew Remover, $4.36 from The Home Depot.
How do you get tough stains out of a fiberglass tub?
Before you give up on trying to scrub away the stains, try the cleaning process Home Depot recommends for tough stains on fiberglass: Smear on a paste of baking soda and water, and cover that with a towel soaked in vinegar. Wait one hour, then rub with a cloth or sponge. Rinse. Wipe again with a clean microfiber cloth.
Can bleach damage a bathtub?
Back to the question, “can bleach damage a bathtub?” Yes, it can. Bleach can add stains to your bathtub is misused. Remember, it is a massive chemical that, if not used correctly, can cause more harm than good.
Does vinegar damage porcelain tubs?
What to Avoid. Porcelain enamel is painted over and fused to cast-iron, so you don’t want to use any abrasive cleansers that could ding or chip the porcelain. Cleaners like scouring powder, white vinegar and steel wool should also be avoided, as they can damage the finish.
How do you get tough stains out of a shower?
To remove tough spots, mix a paste of baking soda and distilled white vinegar or lemon juice. Use a non-abrasive cloth or sponge to apply the mixture. Let it dry and then rinse and buff with a soft, dry cloth.
Will Magic Eraser damage bathtub?
In general, if you have an acrylic tub, it’s best to use non-abrasive cleaners such as dish soap, Clorox wipes, or a mixture of vinegar and water. Do not try bleach or abrasive cleaners like steel wool on the tub. However, the Magic Eraser from Mr. Clean® is a safe option as long as you are gentle when scrubbing.
How do I know if my tub is fiberglass or acrylic?
Look around the tub’s edges and see if it appears thinner; this could be an indication that it is acrylic. Acrylic tubs usually come in more colors than fiberglass tubs, as fiberglass tubs are commonly white. Acrylic also feels warmer to the touch than fiberglass, and tubs made of acrylic have smoother finishes.
Will bleach damage fiberglass tub?
Stay away from bleach You already know bleach can irritate your skin and lungs, especially in high concentration. But bleach can also ruin the resin in fiberglass, so you don’t want to be scrubbing it onto tubs or your shower walls. Ammonia is safe on fiberglass though, so it’s a viable option.
How do you get blue stains out of a bathtub?
Cleaning the bluish-greenish stains caused by corroding pipes is easy. Just mix vinegar and baking soda into a paste, apply to the stains and wait about 10 minutes before wiping off. To prevent these stains, you’ll want to have your water tested to see what is making your water so corrosive.
Does hydrogen peroxide remove bleach stains?
Baking soda, sodium thiosulfate, and hydrogen peroxide all work in different ways to neutralize the bleach. For a small stain, about 1/4 cup of baking soda and a couple of tablespoons of water should work. Use a cotton swab or cotton wool ball to apply the paste to the bleached area.
How do you whiten a porcelain tub?
Soak a non-abrasive sponge in the baking soda/ammonia solution and scrub the surface of your porcelain bathtub or sink, paying particular attention to stained areas. Dip the sponge in the solution, scrub and repeat until you’re satisfied.
How do you get brown bleach stains out of a bathtub?
How to Remove Bleach Stains on the Bathtub Place equal amounts of cream of tartar and hydrogen peroxide in a bowl. Wet the sponge and wipe at the peroxide and cream of tartar paste on the bathtub. Create another bleach-stain fighting paste to remove any stubborn remnants of bleach stain discoloration in your bathtub.
Does white vinegar damage enamel baths?
Abrasive materials such as harsh cleansers, pure vinegar, bleach, scouring powders, and steel wool can damage the enamel on the tub. You should also avoid any cleansers that are highly acidic.
How do you remove yellow stains from porcelain tub?
If you have a porcelain tub, pour a little bit of Ajax or Comet directly onto the bathtub stain (enough to cover it completely). Add a little bit of water and scrub using the abrasive side of a sponge. If you rinse the affected area and you still see a stain, use a pumice stone to lift the remainder of the stain.
How do you remove black stains from an acrylic tub?
For Red or Black Stains, Use Baking Soda and Hydrogen Peroxide. Use the brightening power of baking soda and hydrogen peroxide to remove tough red or black stains. Do not use this method on an acrylic tub—it may scratch the surface. Mix two parts baking soda and one part hydrogen peroxide to form a paste.
Can you bleach porcelain tub?
If you have a white porcelain tub, you can use bleach to clean it. However, don’t use chlorine bleach on colored or vintage porcelain as it can cause damage. Instead, try using a liquid oxygen bleach for colored porcelain. Rinse the sink or tub thoroughly with clean water to remove the bleach.
Why is my tub turning black?
If the space has been flooded or a long-term leak only recently revealed itself, what you see might be the black mold: Stachybotrys chartarum. But, more than likely, an accumulation of grossness along your bathtub or shower tile indicates the presence of a more generic bathroom mold.
