Table of Contents
Instructions Sand the Existing Finish. If your dresser has a smooth finish and is in good shape, feel free to skip this step if you are using chalk paint. Clean the Dresser and Let It Dry. Remove any dust and debris from the surface. Roll on a Coat of Paint. Trim With a Brush. Buff on a Wax Finish. Reattach Your Hardware.
Can I just paint over my dresser?
Prime the dresser with Zinsser Cover Stain oil-based primer using a paintbrush for small areas and a foam roller for large areas. Begin painting by using a paint brush for edges and small details, and a foam roller for large, flat surfaces. Allow paint to dry and add a second coat.
What kind of paint do you use on a dresser without sanding?
Chalk paint is the best way to paint practically anything without sanding. It offers a gorgeous matte finish and no need to prepare the surface. Annie Sloan’s Chalk Paint was the cornerstone of the painted furniture industry as we know it.
What is the best way to paint old wood furniture?
– Wash and abrade the surface using wet and dry paper with a mild detergent. – Sponge down the surface then use an appropriate primer. Wood primer should only be used on bare wood furniture. If your furniture has previously been painted or varnished, use a multi surface primer.
How do you paint an old chest of drawers?
The Steps To Repaint A Chest Of Drawers Step 1 – Clean And Lightly Sand. I did give these painted boys drawers a light sand and a good clean before re-painting. Step 2 – No Undercoat Or Primer Needed. Just Paint. Step 3 – Distress (Optional) Step 4 – Add Handles. Step 5 – Apply Sealer.
How do you refurbish an old dresser?
How to Refinish a Dresser Step 1: Choose a Stain. Staining beautifies wood and helps reduce the contrast between the different types of grains in different pieces of furniture. Step 2: Remove Hardware, Drawers and Clean Surfaces. Safety Alert! Step 3: Remove Old Finish. Step 4: Apply Sanding Sealer. Step 6: Finish It.
What paint is best for furniture?
Satin or semi-gloss paints are ideal for most furniture pieces. No matter whether you’re choosing an interior or exterior paint, you’ll see a range of sheens: flat (matte), eggshell, satin, semi-gloss, and high-gloss, in order of lowest to highest luster.
What happens if you don’t sand before painting?
If you don’t sand before painting you will likely end up with an uneven finish and a paint job that will likely end up peeling after a few months. You may also be able to see any lighter or darker patches of the book come through the paint which looks ugly and unprofessional.
Can you repaint a dresser without sanding?
Milk paint, which you can purchase as a powder or premixed, or even whip it up yourself at home, is a nontoxic and biodegradable paint option that’s great for use on wood furniture—and if you mix it with an equal part of bonding agent, you don’t need to sand the piece before beginning.
What happens if you don’t sand cabinets before painting?
Why You Don’t Need to Sand Cabinets Before You Paint Them “The problem with sanding down to the wood is that it creates the potential for moisture to seep in or out of the wood,” says Chris. Moisture and wood can obviously be a bad combination. And there’s obviously lots more moisture (steam! Spills!Sep 13, 2017.
How do you paint a painted dresser?
Instructions Sand the Existing Finish. If your dresser has a smooth finish and is in good shape, feel free to skip this step if you are using chalk paint. Clean the Dresser and Let It Dry. Remove any dust and debris from the surface. Roll on a Coat of Paint. Trim With a Brush. Buff on a Wax Finish. Reattach Your Hardware.
How do you paint a dresser like a pro?
How to Paint Furniture Like a Pro Use the Right Tools. To avoid visible brush strokes in your paint job, you need to use the right tools. Know What Not to Paint. Lightly Sand Before You Begin. Use Primer. Water Down Your Paint. Lightly Sand In Between Coats. Finish with Polycrylic. Put Furniture on Blocks.
Do I need to prime furniture before painting?
It is best to prime all painting surfaces to prevent stains from bleeding through the new paint. Primer must match the type of paint you have chosen. For furniture, it’s best to use a satin or semigloss finish in either a latex or an oil-based paint. Never leave primer unpainted.
What kind of paint do you use on drawers?
I chose a latex satin paint, but you can paint furniture in any finish you like. Satin, semi-gloss, or gloss will give you more of a polished look – satin the least shiny – gloss the most shiny.
Is it better to sand or strip furniture?
Stripping is Faster and Often Safer. Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. Jan 3, 2018.
Can you paint a wood dresser?
If your wood isn’t dark or knotty, a regular primer is perfectly fine. When the primer has dried, begin painting. Note: It’s perfectly fine, in fact preferable, to use a water-based paint over an oil-based primer. The oil-based primer is what will prevent stains from the wood or previous varnishes from seeping through.
Is Chalk Paint good for furniture?
A decorative paint known for its matte, chalky appearance, chalk paint is a popular choice for giving furniture and home decor a rustic, vintage, or shabby-chic style. Because it can easily be given a distressed look, chalk paint is ideal for those who want to add character and vintage charm to their home.
Can I use wall paint on furniture?
If you have leftover latex paint, you can use that wall paint on furniture too. Latex or water-based acrylic paints work better than oil paints for refinishing furniture. It sets faster, is durable, and it’s easy to remove if you want to refinish your furniture again later on.
