Table of Contents
Yes! Oven-bake clay can be painted after curing. We recommend using water based acrylic paints. Before painting the piece – Test a hidden section of the project first.
Do you paint polymer clay before or after baking?
Polymer clay doesn’t shrink or expand as it cures, meaning you can paint it before you bake. Unbaked clay may create a better bond with paint as it cures. Test different types and brands of paint to find the best results.
How long after baking polymer clay can you paint it?
I would leave the painted polymer clay out for 2 or 3 days to make sure, that the water is completely (or at least mostly) gone before baking it. My recommended way to paint polymer clay is to paint it after you baked it. Wait until the clay is completely cooled down and fully hardened before applying the paint.
Do you glaze Sculpey before or after baking?
We recommend applying two to three thin coats of glaze after baking, and always gently stir the glaze before use to avoid air bubbles.
How do you color polymer clay before baking?
Yes, you can. You can use alcohol-based colors, powder pigments or crayon shavings to color your polymer clay. Acrylic color and other water-based colors can be used as well but the water within these colors has to evaporate from the clay before you bake it.
Can you sand polymer clay after baking?
Sandpaper is used to sand your clay after it has been baked, however you must make sure that you are using Wet/Dry Sandpaper so that you can keep the polymer dust out of the air and use it with water. Start out with the more COARSE grits of sandpaper and than use a very FINE grit of sandpaper.
What kind of paint do you use on Sculpey?
Craft Paints (and the supplies that go with it) are a must have for most polymer clay artists. I prefer acrylic paints and in many cases “heavy body” acrylic paints, but any type of acrylic craft paint is safe to use directly on polymer clay. You can use acrylic paints before baking OR after baking your clay.
How long should you bake polymer clay?
To bake polymer clay, preheat your oven to the manufacturer’s advised temperature (usually 230°F – 275°F). Baking times are typically 15 – 30 minutes for each ¼ inch thickness. Thinner clay needs 15 minutes to cure. When cool, properly baked clay can be marked with a fingernail, but it won’t sink in.
How do you make polymer clay shiny?
Polymer clay is not glossy after baking. You can sand, buff, and polish the clay itself (see below), or you can apply a glossy varnish. To make your clay project less shiny, you could apply a matte varnish. Note that adding a glossy varnish can make translucent polymer clay seem more clear.
What do you seal polymer clay with?
How to seal polymer clay jewellery with a gloss varnish. A gloss varnish will help you to protect any effects you’ve created on the surface of your piece, helping to reduce any damage caused when the piece is worn. However, gloss varnishes are notorious for reacting with polymer clay so take care when using them.
Can you put Sculpey glaze in the oven?
Sculpey® Gloss Glaze Works With All Oven-Bake Clays For the best results: Refrain from applying Sculpey® Gloss Glaze too thickly on your projects as it can peel.
Can I bake Sculpey on aluminum foil?
You can safely bake polymer clay together with Aluminium foil without any problems, which makes it perfect for creating a core four your polymer clay project.
How do you know when Sculpey is done baking?
When you remove your Sculpey piece from the oven, you might not think it’s done. The color should have darkened slightly, but not changed substantially, and there should be no brown edges or burnt spots. It will still feel a bit soft — but don’t worry, that’s a good sign.
How can I bake polymer clay without oven?
When you don’t want to cure clays that harden at a specific temperature in the oven, you can use a heat gun, hair dryer or heat-embossing tool set to the desired temperature. Place the polymer clay creation on a nonstick surface, such as a piece of ceramic tile or block of wood.
Can you use Sharpie on polymer clay?
Sharpie markers write well on polymer clay, but they fade to a purple color over time. It’s best to use archival or pigment-based markers to write on polymer clay. Alcohol ink markers such as Copic also work well, but will fade in the light with time. Most varnishes and sealers will cause these inks to run and smear.
Can I use clear nail polish on polymer clay?
It seems like such a simple solution to use nail polish to accent your polymer clay creations. Or use clear nail polish as a glaze. Don’t do it. The solvent in nail polish will begin to soften and dissolve your polymer clay, even baked clay, making it sticky and gooey over time.
How do you smooth polymer clay after baking?
To use the acetone, dip the cotton bud in the liquid so that it’s moist (but not dripping), then gently wipe it over the parts of the baked clay that you want to smooth. Don’t press down on the clay, or attempt to vigorously rub the fingerprints out.
How do you keep polymer clay flat when baking?
To prevent brown spots from oven spikes, tent your work with aluminum foil pans or an index card. To avoid flat spots on beads, bake them on quilt batting or a bead baking rack. You CAN bake your polymer clay more than once! This is a common practice for intricate pieces.
How do you clean polymer clay after baking?
Try alcohol or acetone: One cool trick is to dip a Q-tip in rubbing alcohol or acetone. You can use nail polish remover, but make sure it isn’t colored. Just swipe your dipped Q-tip or a soaked tissue across the surface you want to clean and it will pull the debris off the clay.
