Table of Contents
Depending on the material you choose, fences cost $15 to $60 per linear foot installed — or $10 to $35 per linear foot for materials and $5 to $20 per linear foot for labor. If you’re installing the fence in a particularly rocky or hilly area, labor costs may be higher. Some contractors charge by the hour.
How much does a 100 foot fence cost?
Yard Fence Costs Per Foot Linear Foot Cheaper (Wire or Electric) Moderate (Wood) 8 $10 – $50 $100 – $200 100 $100 – $600 $1,000 – $2,000 150 $150 – $1,000 $1,500 – $3,000 300 $300 – $1,800 $3,000 – $6,000.
How much does a wood fence cost per foot?
Wood Fence Costs Wood fences cost $17 to $45 per linear foot. Lumber averages from $7 to $15 per foot while labor ranges from $10 to $30 per foot. The largest cost factors include the fence’s length, height and wood type.
How much does it cost to fence 50 feet?
On average, homeowners spend between $1,667 and $4,075 for a new fence installation, with a national average of $2,839. Fence installation costs between $13 and $50 per linear foot.
How much does a 7 foot fence cost?
The average cost to build a fence is $12 to $27 per linear foot depending on the type of wood chosen. The lumber and materials cost between $8.50 and $13.35 per linear foot, and the professional labor to install a fence ranges from $5 to $10 per linear foot on average.
How do I estimate the cost of a fence?
You can more accurately calculate what your project may cost by determining how many linear feet your fence will be. Depending on the material you choose, fences cost $15 to $60 per linear foot installed — or $10 to $35 per linear foot for materials and $5 to $20 per linear foot for labor.
What is the cheapest fence to install?
PVC fencing. The cheapest way to create a fence for your home is by getting one made from PVC. Such fences substitute wooden pickets and stakes to offer your protection from the outside world. PVC sleeves improve the stability of wooden posts used as a fence, reducing the cost of material and the labor used.
What is the cheapest privacy fence?
Inexpensive Treated Pine Treated pine is the most affordable and durable wood option, with HomeAdvisor estimating approximately $1 to $5 per linear foot for a 6-foot tall privacy fence board. Pressure treated pine will be more durable than regular pine over time, so it is a good value even though it costs a bit more.
Is wood or vinyl fence cheaper?
Installing a vinyl fence costs less than wood, although wood as a material is generally cheaper. Wood ranges from $2 to $10 per picket, while vinyl costs between $2 and $6.
How long does a wooden fence last?
Life Expectancy Of Wooden Fencing When properly maintained — which includes replacing individual planks and boards as needed — a well-built wooden fence can last in good condition up to 20 years or more.
How much does it cost to build a fence around 1 acre?
Fencing Cost Per Acre The cost to fence 1 acre runs a minimum of $1,050 and a maximum of $33,400 with most homeowners spending an average price of $2,016 to $9,011. The cheapest backyard fence is barbed wire which costs as little as $1,050 an acre, wheres a split rail wood fence costs about $7,000 for 1 acre.
How much does it cost to fence a small backyard?
Because there are so many different fencing materials, you could pay as little as $8 per linear foot or as much as $46 per linear foot. For a small urban backyard of 500 square feet, that comes out to about $1,782 total. For an average-sized yard of 2,000 square feet, the total cost of fencing would be around $3,564.
Has wooden fence gone up in price?
The last few years, lumber prices have been escalating, affecting the building and fence industry. This year alone, lumber prices went up by 130% since mid-April and continue soaring. Below is a closer look at why lumber prices are increasing and the impact to the fencing industry and the end consumer.
How do you bid on a fence?
How to price your fencing services, step-by-step Get clear on the scope of work. Measure the fencing area. Estimate the material cost. Estimate labor costs. Calculate your overhead costs. Tally all costs. Calculate your margins for desired profit.
How do you calculate linear feet for a fence?
When constructing a board-on-board fence, subtract the board overlap from the width and divide the result into the fence length. Multiply the number of slats by the height of the fence to find the number of linear feet of slat or picket material you need.
Do I need a permit to put a fence around my yard?
OBTAIN A BUILDING PERMIT. If you build a fence without a permit, chances are you’ll get caught. Most municipalities enforce zoning laws that regulate fence height, materials used and even the style of fence if you live in a historic district. You can apply for a fence permit at your local building and planning office.
How can I fence my yard cheaply?
17 Cheap Ways to Fence In Your Yard Corrugated fencing. Recycling old materials is a great dual-purpose way to build cheap fencing. Pallet fencing. For DIY projects, pallets are a common go-to, especially to build a yard fence. Split rail. Chain link. 4-rail horse fence. Bamboo fences. Wrought iron. Vinyl fencing.
What type of fence lasts the longest?
What Type of Fence Lasts the Longest? Chain-link fences with a galvanized finish that doesn’t rust are the longest lasting fences. All other components of the fence are made of steel and are also galvanized, so there is relatively no maintenance.
