Table of Contents
What size AC do I need for 2500 square feet?
Step 5: Match your square footage to an HVAC size chart Home Sq Footage Air Conditioner Size (tons) 600 – 1,000 square feet 1.5 tons 1,000 – 1,500 square feet 2 tons 1,500 – 2,000 square feet 3 tons 2,000 – 2,500 square feet 4 tons.
How many square feet does a 3 ton AC unit cover?
3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.
What size air conditioner do I need for a 2400 square foot home?
The answer to the question, “what size AC unit for 2400 square feet?”, would be, is 60,000 BTUs or 5 Tons. It’s possible to fall between unit sizes, so if that’s the case with you, then you should choose the next higher size. That way, you can be sure that the AC unit can still cool a given area sufficiently.
What size AC do I need for 3000 square feet?
For a home 1,501 to 1,800, the recommended capacity is 3 tons. For a 2,000 square-foot home, the best AC capacity is 3.5 tons. Since larger homes are costlier to cool, you’ll need a 5-ton unit to cool a 3,000 square-foot home.
How many sq ft will a 4 ton AC unit cool?
ZONE 1 ZONE 4 3 Tons 1501 – 1800 sf 1601 – 2000 sf 3.5 Tons 1801 – 2100 sf 2001 – 2250 sf 4 Tons 2101 – 2400 sf 2251 – 2700 sf 5 Tons 2401 – 3000 sf 2751 – 3300 sf.
How much does a 4 ton AC unit cost?
AC Installation Costs by Tons Central Air Conditioner Size AC Unit BTU AC Unit Only 2.5 Tons 30000 BTU $2,895 3 Tons 36000 BTU $2,920 3.5 Tons 42000 BTU $3,550 4 Tons 48000 BTU $3,650.
Can you replace a 2 ton AC unit with a 3 ton?
Simple answer: yes. But that really depends on the size of you house and its condition. If the 2 ton unit is working as designed but seems to run continuously without satisfying the thermostat setting, then it might be undersized and replacing it with a 3 ton unit might be the answer.
What size house will a 3 ton AC unit cool?
For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.
Is the a big difference between a 2.5 ton and 3 ton AC?
The general guideline is a 2.5 ton unit for a home that’s 1,500 to 2,000 square feet. A 3 ton unit is ideal for a home that’s 2,000 to 2,500 square feet.
How big of an AC unit do I need for 2300 sq ft?
The Importance of Proper Sizing a Central AC Room/Area Size Recommended BTU Tonnage 2,200 sq ft 46,000 BTU 4.5 Ton 2,300 sq ft 47,000 BTU 4.5 Ton 2,400 sq ft 48,000 BTU 4.5 Ton 2,500 sq ft 50,000 BTU 5 Ton.
Is it better to undersize or oversize AC?
A system properly matched to cooling loads, or even slightly undersized, will dehumidify better because it will run longer, exposing cold coils to the damp airstream for more hours of the day; removing more water (aka, “humidity”)from the airstream.
What size AC unit do I need for 2100 square feet?
Choose a unit that is 3.5 tons if your home measures more than 1,800 but not more than 2,100 square feet. A four-ton unit is suitable for homes that are more than 2,100 square feet up to 2,400 SF.
What size air conditioner do I need for a 2200 square foot house?
For example, a 2,200 sq. ft. house divided by 600 = 3.6666. So you would want to install a 3.5 ton unit.
How many square feet will a 5 ton AC cool?
How many square feet does a 1 – 5 ton air conditioner cool? AC Unit Capacity (Ton) Cooling Capacity Square Feet 3 Ton 1,400 – 1,600 sq ft 3.5 Ton 1,650 – 1,800 sq ft 4 Ton 1,850 – 2,100 sq ft 5 Ton 2,400 – 3,000 sq ft.
How many square feet will a 10 ton AC unit cool?
HVAC Tons Per Square Foot – Residential When calculating residential cooling capacity, it’s common to assume an HVAC unit can cool 400 square feet per ton of air conditioner capacity. Given the Las Vegas climate, this number can reach a maximum of about 600 square feet per ton of air conditioner for most buildings.
What happens if AC unit is too big?
An oversized HVAC unit can make your home’s inside temperature uncomfortable. An HVAC system with excess capacity can heat or cool your home faster, but that speed often results in a couple of other issues. As a result, you could end up with a number of hot or cold spots throughout your home.
What is the difference between a 14 SEER and a 16 SEER?
The higher the SEER rating, the more efficient your system should be. A 16 SEER unit is about 13% more efficient than a 14 SEER. For every $100 you spend to cool your home with a 14 SEER, you could save $13 on your monthly bill by upgrading to the 16 SEER unit.
What size AC do I need for 1800 sq ft house?
Here’s some math: You need around 20 BTUs per square foot, which is equivalent to 0.0016 tons. For example, a 600-square-foot space requires a 12,000 BTU or 1-ton unit. By those calculations, an average 1,800-square-foot house would need a 3-ton central air conditioning unit.
