Table of Contents
Place on a Level Surface. It’s very important to place a candle on a flat and stable surface when you light it. Trim the Wick. This is a very important tip. Use Multi-Wick Candles. Use Long Matches or a Lighter. Melt the Wax Fully Across. Cover With Foil to Melt Tunnelling. Avoid Drafts. Burn 4 Hours Maximum.
How do you stop a candle from tunneling?
To prevent tunneling, all you need to do is burn your candle long enough each time so that the entire top surface of wax is melted. This is especially important the first time you burn your candle! How long that takes depends mostly on the size of the candle.
What causes candles to burn uneven?
If the wick in single wick candles is not well centered, it may cause the candle to burn unevenly. If it leans to one side, the flame will melt the wax on one side of your candle and not the other. To straighten the wick, gently push it with aknife until the wick is centered in the jar.
Can you microwave a candle to fix tunneling?
Set your oven at around 80 Degrees Celcius / 175 Fahrenheit and heat for 2 minutes. It will evenly melt the top of your candles giving it a smooth and even finish. NOTE: DO NOT put your candles inside a microwave oven! Candles usually have metal wick butts that can be dangerous when put inside a microwave oven.
Why do my candles have sinkholes?
Sinkholes occur naturally from the process of the wax setting up. As wax is heated to melt it into liquid form, the wax expands literally taking up more space as it changes form from solid to liquid. This is the reasoning as to why sink holes can appear in your candles.
How do you fix short wick tunneling candles?
Fortunately, you have a few options for fixing a candle wick that’s too short: Light the wick and let it burn for 20 to 30 minutes. If the flame remains weak, blow out the candle and pour the wax it melted onto a paper plate. The newly formed indent in the wax exposes more of the wick.
How do you fix a candle that didn’t burn evenly?
You can fix a tunneled candle by wrapping a piece of aluminum foil around the edges and simply letting it burn. Make sure the foil hangs over the built-up wax areas, but leave an opening in the center so the wick can still burn properly. After a couple of hours, the wax should melt and even out the surface.
Why is candle tunneling?
Candle tunneling occurs when only the center of the wax right around the wick melts and burns down. Sometimes, candle tunneling is caused by a wick that isn’t large enough for the size of the candle, but more often it’s caused by the timing of the first burn.
How do you prevent bubbles in candles?
The single best way to avoid getting air bubbles in your glass jar candles is to make sure to pre-heat your glass jars to about 160 degrees before pouring your candle wax into them.
Can you use a toothpick as a candle wick?
To use a toothpick as a candle wick, all you need are a candle, a toothpick, and a pair of pliers. The point of using a toothpick is to let the candle burn more efficiently as the shorter wick doesn’t produce a bright flame. As the wax melts, the toothpick gets coated in molten wax and burns brighter.
What happens if wick is too small?
Keeping a Candle Wick from Getting Too Short This excess wax can melt during future burns, which causes the wick to be drowned in the refuse, thus shortening its height. The first time you burn your new candle, let it burn for a long enough time that the melted wax pools uniformly across the surface of the candle.
Why do you have to cut the wick of a candle?
Keeping the candle wick trimmed helps control the amount of melted wax (i.e., fuel) that the candle has access to, which helps limit the amount of soot it creates. The trimmed wick also helps the candle burn more evenly, controlling the soot and prolonging the life of the candle.
How long should a candle burn first?
Solution: Particularly for their first burn, candles are supposed to burn for at least one hour per inch of container diameter. So, if you bought a new candle that is 3 inches in diameter, you should burn your candle for at least 3 hours (though not more than 4 at a time).
Can you microwave a candle?
Another way to melt wax is in the microwave. Some people choose this method as they can melt the wax faster than if they were using a double boiler. Pour your wax into a microwavable container. Continue heating your wax in 2-minute intervals until it’s fully melted.
