Table of Contents
Tips for Choosing a Toilet A new generation of low-flow models. How Much Do New Toilets Cost? Shop plumbing supply houses and bathroom showrooms. Consider Future Repair Costs. Solve a sweating tank problem. Beware of Pressure-Assist Noise. Beware of Nonstandard Parts. Colored Toilets make a House Harder to Sell.
How do I know which toilet to buy?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
How do I buy a replacement toilet?
Always buy a toilet with the correct rough-in. To determine the size of your toilet rough-in, measure from the wall behind the toilet to the bolt caps of your current toilet. Most toilets are available in a 12-inch rough-in, which is the standard distance, but a 10- or 14-inch rough-in may be needed in some homes.
Do all toilet fit the same?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
Is a 1 piece or 2 piece toilet better?
One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.
Is it hard to replace a toilet?
Replacing a toilet is a major project, but it is not as difficult as might be imagined. The hardest tasks usually are selecting a new toilet and removing the old one. Then remove the tank cover, flush the toilet and sponge the tank dry. Use a plumber`s plunger to force as much water as possible out of the bowl.
How long after a new toilet is installed can you use it?
If you want to know how long after installation a toilet can be used, we recommend waiting at least 3 days. After the initial installation and flushing process is complete, it’s important that your new toilet has time to settle in before using it.
What is the lifespan of a toilet?
Toilets can last for up to 50 years under average conditions. However, this doesn’t mean that you won’t need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.
Can I replace my toilet myself?
Installing a replacement toilet is essentially the same process, in reverse: preparing and cleaning the space, placing a new wax ring, setting the new toilet and sealing the ring, attaching the nuts, washers, bolts, and bolt caps, securing the tank and valve assembly, adding the toilet seat, and finally, turning the.
How much should it cost to have a new toilet installed?
On average, a standard toilet installation costs between $120 and $230 for labor with most homeowners spending around $150 to $180. This does not include the price of the toilet which averages $100 to $200 for a total toilet replacement cost of $220 to $430.
How do I know if my toilet is 10 or 12?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
What is the difference between a 10-inch and 12-inch rough-in toilet?
Considerations. When a toilet with a 10-inch rough-in is placed in a 12-inch rough-in space there will be 2 inches of open space between the tank and wall. However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.
Can a round toilet be replaced with an elongated toilet?
Yes and Make the rough in distance from the back wall 13–1/2 inches and 16- 1/2 inches high toilet from the floor. and place it 1ft 6 inches from any side wall.. That will be perfect and then you can enjoy it.
Can you replace a 14 inch rough in toilet with a 12 inch rough in toilet?
You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.
Can you replace a 10 inch rough in toilet with a 12 inch rough in toilet?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
Are elongated toilets better?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
What is best comfort height toilet?
The Best Comfort Height Toilet on the Market of 2022 KOHLER K-3589-95 Cimarron Chair Height Toilet. WOODBRIDGE T-0019, Dual Flush Comfort Height Toilet. Convenient Height Extra Tall Toilet. Kohler K-3658-47 Highline Classic Class Comfort Height Toilet. TOTO GMAX CST744SL Drake 2-Piece Comfort Height Toilet Our Top Pick.
What is comfort height toilet?
Traditional toilets are 15 inches high. Comfort height toilets (or “right height” toilets) have higher seats than traditional toilets, usually between 17 inches and 19 inches. Comfort height toilets are becoming a popular option for many households.
How do I get rid of an old toilet?
Cover the Drain Hole & Dispose of the Old Toilet Call your local trash services or visit their website to see if they will pick up your old toilet from your curbside. Drop off the old toilet at your city’s landfill. Drop off the old toilet at a local recycling center that accepts porcelain.
Should you caulk around a toilet?
Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?Dec 13, 2021.
How often should you replace your toilets?
Typically, toilets need replacement after 25 years of use so this can be considered the average toilet lifespan. Some would argue that the porcelain toilet itself has a much longer, and even unlimited, lifespan and that it’s only the components inside that need repairs and replacements.
