Table of Contents
How-To: Choose Cabinet Hardware Types of Cabinet Hardware. Knobs have smaller profiles than handles, are less expensive, and can be used for both drawers and cabinets. Pulls are larger than knobs, make more of a statement, and tend to be easier to grip. Select a Style. Choose a Finish. Don’t Be Afraid to Mix Metals.
How do I know what hardware to get for my kitchen cabinets?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
Does your kitchen faucet have to match cabinet hardware?
Your kitchen hardware needs to match the faucet perfectly. That said, keeping the two similar is the best way to keep your kitchen cohesive, so undertones matter. For example, if you decide on a gold sink faucet, we recommend either matching your hardware or choosing a warmer brass or nickel finish.
Should all hardware in kitchen match?
It’s not always necessary for cabinet hardware to match appliances, but they do need to be complementary. Matte cabinet hardware goes with just about any appliance finish, but with glossier hardware styles, its a smart idea to compare the two before purchasing.
What kitchen hardware is most popular?
Top 16 Most Popular Kitchen Cabinet Knobs and Pulls Alison Value Oversized Antique Brass Knob. 3-Inch Bit Pull (Oil Rubbed Bronze) Alison Value Center to Center Bar Pull. Somerset Melon Pull 7-inch (Brushed Satin Nickel Finish) Davenport Knob (Satin Nickel Finish) Square Twist T Handle Knob (Steel).
What hardware looks good on white cabinets?
Hardware on white cabinets will stand out and steal the show, so it’s a great opportunity to go bold! If you have warm tones, go with gold, black, or bronze hardware. If you have a cold grey tone, then silver, pewter, black, and stainless steel hardware will work.
Where do you put cup pulls on drawers?
Cup Pulls: Cup pulls are only ever used on drawers, and I like to center them in the middle of the drawer slab. If you have a 5 piece drawer (top and bottom rails, inside panel, and side rails) you want to make sure the hardware itself will fit (centered) in the middle panel before purchasing and installing.
Can you mix brushed nickel and oil rubbed bronze?
It is certainly fine to match everything, but can be a little too bland. A different finish on a light fixture or island hardware adds personality & verve to the interior.
Can you mix cabinet hardware finishes?
Mixing metal finishes can add dimension and visual interest to a room. Instead of a monochromatic, one-note space, you create intrigue and the illusion of texture. When you mix metals, you can blend styles, making a room look more or less modern depending on your personal taste.
Should the drain match the faucet?
Although it isn’t required, you should try to match your kitchen sink drain and faucet. Even if you prefer a mixed finish look, it’s better to have your drain and faucet be somewhat close in color. That said, your sink’s hardware doesn’t have to be exact, but they should all share a similar undertone.
Is Brushed nickel out of style 2020?
You may be wondering if brushed nickel is going out of style. While it’s not considered trendy anymore, it is a hardware finish that looks good in most spaces, is affordable and widely available.
Should you mix cabinet knobs and pulls?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
Should cabinet pulls be vertical or horizontal?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
Do cabinets look better with hardware?
Cabinet hardware should match existing metalwork such as your sink faucet, or appliances. This creates a unified look in any kitchen or bathroom. Pick the same knobs and pull for the entire room, and make sure it matches the main finish in the room.
What is the trend for kitchen cabinets in 2021?
“Coffee stained wood tones are then new trend for cabinets in 2021.” A clear 2020 trend is mixing natural wood finishes with colored cabinets. Most new kitchens are doing combination looks with stained islands, beams, furniture built-ins, and hoods.
What is the most popular color of kitchen hardware?
Silver hardware is probably the most common finish you’ll see in kitchens and bathrooms. Satin/brushed nickel took the world by storm a few decades ago and it’s still very popular. That makes sense because it’s a lovely complement to wood cabinets and all colors of kitchens and bathrooms.
Should you paint cabinet hinges?
New cabinet door hinges are costly, and you can save a substantial amount of money by repainting old hinges yourself. A top-quality paint will give the hinges a professional-looking finish. Remove the hinges from the doors, using a drill.
What size should cabinet pulls be?
Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
Are knobs or pulls better for kitchen cabinets?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
