Table of Contents
Can you use any cleaner in the Bissell SpinWave?
However, using anything other than the Bissell cleaners in the tank can damage the machine and void your warranty. One suggestion is to fill the tank with water only and use a separate spray bottle for the vinegar. Spray your floor with the vinegar one section at a time, then go over it with the mop.
Why is my Bissell SpinWave leaving streaks?
Make sure to hold the trigger to leave an even finish on your floor. Streaking can also occur if you use too much water during passes, causing your brushes to become over saturated. This will help dry floors faster. The last cause for streaking could be dirty brush rolls.
Can I use bleach in my Bissell SpinWave?
If your Bissell Crosswave is still under warranty, you will void the warranty if you use anything besides their recommended Bissell cleaners. For this reason, you probably shouldn’t. But if you aren’t worried about the warranty, then technically, you can mix bleach water, vinegar, or just about any other cleaner.
Is Bissell SpinWave safe for hardwood floors?
Safe to use on sealed hard floors, like tile, laminate, vinyl, hardwood, and linoleum. Includes one pair of soft touch pads to gently clean hardwood floors, and one pair of scrubby pads to clean tough, sticky messes. Dispense just the right amount of cleaning solution on floors with the On-Demand Spray Trigger.
Does the Bissell SpinWave heat up?
The great thing about the SpinWave mop in this sense is that it is suitable for all types of floors. You can use warm water with the SpinWave, but it does not reach extremely warm temperatures, and so can be used on all different types of flooring, risk free.
Can I use Bissell SpinWave on carpet?
The most common cleaning formula for the Bissell Spinwave is the Bissell Multi-Surface Cleaning Formula, which is especially ideal for area rugs, low-pile carpets, tiles, sealed hardwood, and laminate floors.
Are Bissell SpinWave pads washable?
Each pad is made with high-quality microfiber that is reusable and machine-washable.
Why is my Bissell SpinWave not spinning?
The Bissell SpinWave discs may not spin if the screws securing them are loose. Take off the mop pads on the bottom of the foot and tighten the screws that hold the discs in place. The discs may also not spin if there is too much resistance, used on carpet or rugs, or used without pads on bare floors.
Do you hold trigger on Bissell CrossWave?
CrossWave is the best way to clean sealed hard floors. Then hold your CrossWave over the stubborn mess while holding the spray trigger. Using short passes while holding down the trigger, the multi surface brush will go to work.
Why is my Bissell leaking dirty water?
There may be too much foam building up within – be sure to use the recommended amount of formula as indicated on the clean tank. Also be sure to use the proper CrossWave formula (not portable or upright cleaning formulas).
Can I use Pine Sol in Bissell Spinwave?
The main reason not to use cleaners like bleach and pineSol is they can damage your crosswave. They can eat away at the seals and gaskets and end up either breaking suction or allowing water to go where it shouldn’t. For the longevity of your unit use the suggested solutions.
What can I use instead of Bissell cleaning formula?
To make a carpet shampoo used by many Bissell owners, mix the following: a half cup of laundry detergent (no bleach), a half cup of liquid laundry softener, one cup of ammonia and one gallon of water. Store the mixture in a large jug. This will be enough for several cleanings.
Does the Bissell SpinWave work on laminate flooring?
It’s safe on sealed hard floors, tile, laminate, and even area rugs (when you use it with a BISSELL® CrossWave®). SpinWave® also lets you control how much solution you put on your floors, thanks to an on-demand spray control. This feature is especially important for laminate floors.
Can you use a Bissell SpinWave on engineered hardwood?
Yes – the SpinWave is designed for hard floors including engineered hardwood.
Is the Bissell SpinWave good for vinyl floors?
Let the BISSELL® SpinWave™ powered hard floor mop do it for you. Safe for cleaning sealed, hard-surface floors like tile, linoleum, vinyl flooring, and hardwood floors, this versatile machine comes with a set of soft touch cleaning pads for everyday cleaning and scrubby pads for tough, sticky messes.
Does the Bissell SpinWave dock itself?
Like most other robot vacuums, the SpinWave features a main brush roll on the bottom, plus dual edge-cleaning brushes. In Auto mode, the robot cleans in straight lines, and automatically returns to its dock when its battery runs low.
Can you use Bissell SpinWave without WIFI?
A: No. A: I found that Wifi is not needed. Once can manually start the cleaning process by pressing the button on top.
