Table of Contents
In five steps or less, quickly update plastic surfaces to better reflect your personal style: Clean project surface. Lightly sand surface if previously painted. Remove dust with a tack cloth. Let plastic surface dry. Apply Krylon ® Fusion for Plastic ® spray paint according to the directions on the spray can label.
Can you use spray paint on plastic?
Most general-purpose spray paints work on plastic, but care must be taken to prepare the surface before painting. For the sake of convenience, you may wish to use a spray paint labeled as being specifically meant for plastics, like Krylon Fusion for Plastic or Rust-Oleum Specialty Plastic Primer Spray.
How do I prep plastic for spray paint?
Instructions Start by wiping down the plastic surface with mineral spirits or rubbing alcohol. Using a fine-grit sanding block, lightly sand the surface to a dull finish. Apply the plastic primer according to the directions on the back of the can. Apply the spray paint according to the directions on the can.
Do you have to sand plastic before spray painting?
To ensure proper coverage, it’s important to clean and sand the item before you paint it, otherwise the paint may not adhere properly. With spray paint, it’s also important that you work in a well-ventilated area to protect yourself from fumes.
What kind of paint will stick to plastic?
Use paints that are specifically formulated to adhere to plastics. There are several available on the market such as Krylon Fusion for Plastic® , Valspar® Plastic Spray Paint , and Rust-Oleum Specialty Paint For Plastic Spray . If using regular spray paint then your item will need to be primed.
How do you keep spray paint from rubbing off plastic?
You definitely need a primer designed specifically for plastic if you’re using regular spray paint. The specialty primer can create a foundation that helps the paint stick. Apply the spray primer in even amounts to the completely sanded, clean and dry plastic item.
How do you get paint to stick to plastic?
To help the paint stick better, scuff-sand the surface with 200-grit sandpaper. Wipe off the sanding dust with a damp cloth and let dry. Prime: If you’re painting interior plastics, apply a high-adhesion latex stain-blocking primer.
Why is my spray paint bubbling on plastic?
The bumps occur due to reasons such as improper cleaning of the surface before application or a rushed job. Sometimes the bubbles are simple enough to repair without a lot of work, but other times it’s necessary to completely redo the entire paint job to save it.
Why is my spray paint cracking?
The most common culprits why spray paint crackles are temperature, when it is too hot or too cold, or applying too much paint in one go. When you apply spray paint in conditions too hot, the solvent in the paint evaporates, causing the paint to shrivel up and crack.
How do you spray paint evenly?
Spray project using several thin coats of spray paint instead of one thick coat. Begin and finish your spray pattern off the object, releasing the tip at the end of each pass. Use an even side-to-side motion. Overlap your spray pattern by about one-third with each pass.
Do you need to prime before spray painting?
You dont always need a primer, but it always helps to create a smooth surface for enhanced painting. The main purpose of using the best spray paint primer is to allow the paint to stick better to the surface. Primer also helps the paint to have a longer life and will reduce the risk of peeling or chipping.
What does spray paint not stick to?
Most spray paints do not adhere well to plastic surfaces and can quickly peel, bubble, chip or flake off, making the surface look worse than before you started. This is why it’s important to use the right spray paint for plastic.
What is a good primer for plastic?
Rust-Oleum® Specialty Plastic Primer Spray prepares plastic for painting with any top coat. Apply directly to plastic mailboxes, lawn chairs, storage lockers and more. Adheres to hard-to-paint surfaces.
Does acrylic paint stay on plastic?
Will Acrylic Paint Stick to Plastic? No, not unless the plastic has been prepared by sanding it first, then spraying on a primer. Because plastic is smooth and non-porous, and acrylic paint has a similar consistency when dry, the paint cannot adhere to the plastic.
Can you paint plastic garden pots?
Painting plant pots is a great way of using up left over spray paint from previous projects and can be complete in just a few hours. As well as injecting colour, spray paints can add texture to your everyday, plastic plant pots.
Is oil paint good for plastic?
Oil-based paints create a hard surface, which makes them ideal for plastic products that are not flexible and won’t crack. Oil-based paints over plastic are ideal for outdoor planters and décor items because they resist rust and stains due to their hard, non-breathable surface.
How do you make spray paint not come off?
Add or use nozzles with finer spray tips (like 220 mesh) for a finer finish. It helps to stick the paint well. Applying a primer may protect the spray paint better while preventing any cracks or water absorption. Do not store the spray cans in a cold box (refrigerator).
How long does spray paint dry on plastic?
Plastic: Spray paint takes about 30 minutes to feel dry to the touch on plastic surfaces. If you can touch the surface without getting any paint on your hands or leaving any impression on it, then the paint has cured. Allowing 24 hours for the paint to cure on plastic items before using them is a good idea.
