Table of Contents
For deep cleaning and disinfecting wood floors, you should give the surface a more thorough clean every 1-2 weeks. To disinfect your floor, use Lysol® Clean & Fresh Multi-Surface Cleaner at full-strength (or dilute 1 oz to 5 oz of warm water in a bucket) and be sure to pre-clean the surface.
What is the best thing to use to clean wood floors?
You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. Be sure to follow the manufacturer’s instructions. You can also make your own cleaner by mixing one part vinegar to 10 parts warm water. Add a few drops of liquid Castile soap.
How can I disinfect my floors at home?
Most hard surfaces recommend a bleach solution for disinfecting, but often you’ll want to keep bleach and other harsh chemicals away from your flooring. Instead, you can disinfect vinyl and laminate flooring by mopping with a mix of one gallon of warm water and one cup of white vinegar.
Can you use antibacterial wipes on hardwood floors?
For small spills, try Clorox® Disinfecting Wipes. They even work on wood floors! For a deeper clean, vacuum or sweep the floor before mopping to remove the excess dirt, crumbs and other floor-dwelling particles.
Can you use Pine Sol on hardwood floors?
We like using Pine-Sol® Original Pine Multi-Surface Cleaner on hardwood floors. You can also use Pine-Sol® Original Squirt ‘N Mop®. It’s safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle.
Is white vinegar safe for wood floors?
Avoid Cleaning with White Vinegar and Water for Hardwood Floors. The finish is the protective layer of your hardwood floors. Since vinegar is an acid, it will actually break down the finish on the surface of your floor, and over time it will reduce the shine and leave a dull appearance.
How do you disinfect hardwood floors without damaging them?
Use a damp-mop with a flat-head mop and microfiber pad or a microfiber string mop that has been thoroughly wrung out when it looks dingy. Move with the grain, and control the amount of cleaning solution by using a spray bottle, aiming for a heavy mist or gentle squirt of about a half teaspoon per 2 square feet.
How do you disinfect hardwood floors naturally?
7 Best Homemade Wood Floor Cleaners Water and Vinegar. Water, Vinegar, and Essential Oils. Vinegar and Vegetable Oil. Plant-based Liquid Soap, Vinegar and Water. Tea Bags. Lemon Juice, Olive Oil and Hot Water. Dish Detergent, Water and Vinegar.
Can I use Clorox wipes on wood?
When you’re doing a DIY woodworking project, it’s a good idea to start with a fresh, clean surface. But whatever you do, if you’re working with untreated wood, don’t use a Clorox wipe to clear off dust and dirt. Because untreated or unpainted wood is porous, disinfectant wipes can leave it with a big, ugly stain.
How do you disinfect wood?
A mixture of 1 part Chlorine Bleach, (Clorox) to 32 parts water (½ cup bleach per gallon of water, or 4 teaspoons bleach per quart of water) will need to sit on surfaces for 5-10 minutes in order to disinfect them. We found this did not harm either of our wood finishes.
Does Bona wood floor cleaner disinfect?
Bona PowerPlus Antibacterial Hard-Surface Floor Cleaner uses the power of hydrogen peroxide to effectively clean and disinfect floors. When used as directed, it can clean up to 99.9% of household germs.
Can I use Clorox wipes on floor?
Clorox can absolutely be used to clean and disinfect hardwood floors. The mopping cloths attach to the Swiffer or mop and just need to be wiped across the floor. The great thing about Clorox disinfecting wet mopping cloths is that they kill 99.9% of germs including staph, strep, salmonella, and E. Coli.
Can Lysol be used on wood floors?
You can clean polished wood or non-porous hardwood floors with Lysol® . If you’re just looking to – you can use Lysol® All-Purpose Cleaner to clean and disinfect your floor surface without causing damage to the wood.
Is it OK to use Murphy’s Oil soap on hardwood floors?
THOROUGHLY SATISFYING For a deep, conventional cleaning, consider using a concentrated product like Murphy® Original Formula. Whether you’re cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
What not to use on hardwood floors?
Avoid using water and vinegar, soap-based cleaners, wax or steam cleaners on hardwood floors. Vinegar and water can dull the floor’s finish over time, while soap and wax leave a residue. Steam cleaners put heat and excessive water on your floor, which can lead to cupping and long-term damage. Use mats.
Can you use apple cider vinegar to clean hardwood floors?
Mix 1 cup of apple cider vinegar per 1 gallon of warm water in a bucket. Wash the floor with the cleaning solution. Wipe the floor dry with a clean cloth immediately after washing it. Don’t leave any standing water, or it may soak through the finish and discolor the wood.
Can you use dish soap on hardwood floors?
How do we clean wood floors? An alternative natural cleaning solution is warm water and dish soap (1/4 cup of dish washing liquid for a bucket of warm water). ● For spot cleaning needs, sprinkle baking soda on the affected area and scrub with a sponge.
Does vinegar destroy wood?
hardwood floors, wood furniture, and other word surfaces – due to its acidic nature, vinegar can damage hardwood floor finishes, causing them to look dingy. Use either a cleaner specifically made for hardwood floors or a mix of soap and water.
Does Swiffer disinfect?
No, they don’t. Cleaning only.
