Table of Contents
Additionally, be sure to choose a curtain rod that’s wider than your window. This allows curtains to be pulled completely to the side of the window and gives the appearance of a larger space. The rod itself should be 8 to 12 inches longer than the width of the window, which allows for 4 to 6 inches on either side.
How far should a curtain rod extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How much bigger should a curtain rod be?
A good rule of thumb is to have the curtain rod extend three to four inches from each side of the window frame.
How much wider is the curtain than the window?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How do I choose curtain rod width?
To determine the optimal width of your curtain rod, you’ll need to measure the width of your window including the frame or trim. Take this measurement three times: once at the top, once at the center, and once near the bottom of your window. These measurements will most likely vary slightly.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How far should curtains hang below window sill?
While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.
How do you measure curtain width?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
How wide should curtains be for 48 inch window?
Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
How wide should curtains be for 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How wide should curtains be for 120 inch window?
For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.
Do curtain rods have to match light fixtures?
You do not need to match metal finishes in your lighting, in your hardware, in your faucets, or curtain rods. One important trick here is to keep all your lightings, whether recessed can lights,pendants,or chandeliers,no more than 6 to 7 feet from each other.
Which curtain rod is best?
Best curtain rod overall: Decopolitan End Cap Single Curtain Rod Set. Best curtain rod for renters: RoomDividersNow Tension Rod. Best curtain rod for traverse draw heavy drapes: Rod Desyne Heavy Duty Adjustable Traverse Rod. Best curtain rod for blackout curtains: Umbra Twilight Room Darkening Curtain Rod.
How wide should curtains be for 100 inch window?
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
Should curtains touch the floor or window sill?
In formal or dressy rooms, curtains should just touch the floor. A romantic room deserves elegant, extra-long curtains that pool or puddle on the floor. Curtains to the sill, or to the bottom of the window trim (called the apron), look great and are practical in a kitchen.
Should curtains be longer than window?
Floor-length curtains will elongate your window and make your room feel taller. The two are related; generally, longer curtains require more fullness to look balanced. For floor curtain lengths, a good rule of thumb is to take the width of your window and double it, or multiply for 1.5 for a more tailored look.
Should curtains hang below window?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
Do you double the width for curtains?
The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.
When buying curtains is the width per curtain?
You should choose the width that most closely matches the size of your track or pole. The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
