Question: How To Repaint A Dresser

Table of Contents

Instructions Sand the Existing Finish. If your dresser has a smooth finish and is in good shape, feel free to skip this step if you are using chalk paint. Clean the Dresser and Let It Dry. Remove any dust and debris from the surface. Roll on a Coat of Paint. Trim With a Brush. Buff on a Wax Finish. Reattach Your Hardware.

Can I just paint over my dresser?

Prime the dresser with Zinsser Cover Stain oil-based primer using a paintbrush for small areas and a foam roller for large areas. Begin painting by using a paint brush for edges and small details, and a foam roller for large, flat surfaces. Allow paint to dry and add a second coat.

What kind of paint do you use to repaint a dresser?

For furniture, it’s best to use a satin or semigloss finish in either a latex or an oil-based paint. Never leave primer unpainted. If you choose a latex paint, a latex primer is an excellent choice for most uses.

Can you repaint a dresser without sanding?

So the question becomes, “Can I paint laminate furniture without sanding too?” Yes! By using the same method as above, you can paint laminate furniture without sanding. The priming step is the most important for painting laminate furniture since you don’t want to sand an already delicate surface.

Do I need to strip a dresser before painting?

If you’re going to paint (or repaint) a piece of furniture, you probably don’t need to strip it. Wash it with TSP substitute mixed with water. Then, using medium- or fine-grit sandpaper, smooth out any bumps or flaking paint and scuff-sand other areas so the new paint will stick better.

How do you paint a finished dresser?

What is the best paint to paint wooden furniture?

The Best Type of Paint for Furniture Latex Paint. Chalky Paint. Milk Paint. Acrylic Paint. Oil Paint.

How do you redo an old dresser?

How to Refinish a Dresser Step 1: Choose a Stain. Staining beautifies wood and helps reduce the contrast between the different types of grains in different pieces of furniture. Step 2: Remove Hardware, Drawers and Clean Surfaces. Safety Alert! Step 3: Remove Old Finish. Step 4: Apply Sanding Sealer. Step 6: Finish It.

Is it OK to spray paint wood furniture?

Steps for Spray Painting Wood Furniture Aerosol spray paint is readily available in a wide color range and is inexpensive, and easy to use— a small investment for a good result. Once your work area and furniture are prepped, spray the piece with the bonding primer.

Can you spray paint a dresser?

If you are painting a dresser of some sort, next take out all of the drawers and lay them face up. Start by priming all of the drawers and make sure to do at least 2 coats before using the spray paint. Also lay out all of the hardware and spray those as well! Finally, spray paint the furniture and let dry.

What happens if you don’t sand before painting?

If you don’t sand before painting you will likely end up with an uneven finish and a paint job that will likely end up peeling after a few months. You may also be able to see any lighter or darker patches of the book come through the paint which looks ugly and unprofessional.

Can you paint over painted furniture without sanding?

Chalk paint is the best way to paint practically anything without sanding. It offers a gorgeous matte finish and no need to prepare the surface. Annie Sloan’s Chalk Paint was the cornerstone of the painted furniture industry as we know it.

Is it better to sand or strip furniture?

Stripping is Faster and Often Safer. Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. Jan 3, 2018.

Do you have to sand before painting over paint?

While sanding is not required for every paint project, rough spots on walls, whether they have been previously painted or not, need to be sanded before they are painted to ensure the paint goes on smoothly. For previously painted water-based paint, sand with a fine-grit sandpaper.

How much do I need to sand before painting?

How To Sand Surfaces For Painting Use Coarseness For bare wood 80-120 Plastic, ceramics, melamine, Formica, metal and stone 100-150 Between coats of paint 120-220 Before applying stain inside (water-based) 180-220.

Can I paint over varnished wood without sanding?

It is generally not recommended to paint over varnished wood, but you can paint over it without sanding it. If you want to protect the surface permanently, you can use Chalk paint and seal it with a top coat. Or, you can use a special bonding primer to prepare the surface for painting without sanding it first.

Can you paint over a wood finish?

Special prep is required when painting over oil-based wood stains. It’s possible to cover oil-based finish with either latex paint or oil-based paint, but additional surface prep is needed. First, don safety goggles and gloves, and turn on a fan to circulate the air in your work area.