Table of Contents
Soak a non-abrasive sponge in the baking soda/ammonia solution and scrub the surface of your porcelain bathtub or sink, paying particular attention to stained areas. Dip the sponge in the solution, scrub and repeat until you’re satisfied. Rinse well.
How can I make my porcelain tub shine again?
Put the shine back in your porcelain sinks and bathtubs by giving them a good scrubbing with full-strength white vinegar, followed by a rinse of clean cold water.
How do I make my dull bathtub shine?
Mix 1/4 cup white vinegar with 1 tablespoon of baking soda in about a liter of hot water and use this on terry cloth to wash out your tub. You can add some essential oils for a boost of fragrance too.
Can you polish porcelain bathtub?
If you want to polish your tub, you have to choose a product that will give it a bright shine rather than scratch it up. Products that contain harsh abrasives or highly acidic ingredients like vinegar can damage a porcelain finish. Use a product made specifically for porcelain and polish the tub with a rag.
How do I restore the shine to my enamel tub?
Spraying a solution of water and white vinegar all over the bathtub provides an effective deep-clean that can help treat stains or residue. Leave the mixture to rest for 15 minutes before wiping off with a clean sponge or cloth. Rinse and wipe as before.
How do I make my bathtub sparkle?
Here are eight tips on how to make your bathtub sparkle: 1) Prevent soap scum and mildew from forming. 2) Experiment with DIY cleaners. 3) Scrub properly. 4) Pick the right tools. 5) Buy a showerhead filter. 6) Properly ventilate your bathroom. 7) Unclog your drain regularly.
How can I make my old bathtub look new again?
Diluted bleach is particularly effective at combating mold and mildew growth in your tub. If you have dirty tiles around the tub, ordinary hydrogen peroxide is an effective tile and grout cleaner, and white vinegar is good for cleaning bathtub fixtures. Never use all of these chemicals at once, though.
How do you make an old porcelain tub look new?
Soak a non-abrasive sponge in the baking soda/ammonia solution and scrub the surface of your porcelain bathtub or sink, paying particular attention to stained areas. Dip the sponge in the solution, scrub and repeat until you’re satisfied.
How do you polish porcelain?
Use a non-abrasive porcelain polishing compound to remove pot marks and other stains. Apply the compound to the stains and gently rub with a soft cloth or a cork to remove the stains and polish your sink. As an option to using a commercially packaged polishing compound, make a paste with baking soda and hot water.
How do I make my porcelain sink shine again?
Dilute 1 part household bleach with 5 parts water. Pour the mixture onto the towels until they are soaked through. Remove the towels after eight hours and rinse the sink. The bleach removes any remaining stains or deposits so the sink shines again.
How do you shine dull porcelain?
Baby oil or lemon oil also works to restore the shine of your porcelain. When using either oil, apply a few drops onto a clean rag and wipe down the entire sink. The oil restores shine and helps protect against future stains as it forms a protective barrier on your sink, making it harder for things to stick to it.
Can porcelain be polished?
The dense, hard surface of porcelain has made polishing a viable alternative to a glazed surface. This means that a tile can be fired, then a polished creating a shine without a glaze. However polished porcelain may need sealing, where ordinary glazed tiles do not.
Does vinegar damage porcelain tubs?
When cleaning a porcelain bathtub, avoid using abrasive cleaners as they can chip the surface of the bathtub. Also stay away from scouring powder, white vinegar, and steel wool as they can damage the finish of the bathtub.
Can you wax a porcelain tub?
POLISH AND PROTECT: This is the perfect solution for a DIY bathtub cleaning project. With our polishing wax, you can bring back the original surface luster to porcelain, fiberglass, and recast tubs.
How do I know if my tub is porcelain or enamel?
PORCELAIN TUBS But there’s a simple item you can use to determine bathtub types in this situation: a magnet. Since enamel tubs cover cast iron or steel, they’ll be magnetic. So if the magnet doesn’t stick, you have a porcelain tub. Porcelain tubs have a higher tolerance for cleaning agents than enamel or acrylic tubs.
How do you polish a bathtub?
Reader’s Digest recommends mixing two parts baking soda to one part hydrogen peroxide to form a thick paste. Apply this paste in a targeted manner to any stains remaining in your tub. Allow the mixture to dry out fully, which should take around 30 minutes; then rinse with warm water.
What cleans a bathtub the best?
Here are the best bathtub cleaners of 2021 Best bathtub cleaner overall: Mr. Best bathtub cleaner for hard water and rust stains: CLR Pro Calcium, Lime, and Rust Remover, $5.87 from The Home Depot. Best bathtub cleaner for mold and mildew: Clorox Plus Tilex Mold and Mildew Remover, $4.36 from The Home Depot.
